openrcforums

Then I will be necessary to convert the data back to Mavlink, I try an app call FRsky Dashboard with no luck, I will like to use Qground control but it needs Mavlink

HC-05, It is connected and configured as the post so detailed show.
the androids can see the BT. they pair , password ok.
Qground control see it, However its not working.

Thanks for the quick response. I can see the telemetry data on my radio. (Using Frsky xjt, x8r, a converter and Pixhawk ) Is this how it should be done. http://openrcforums.com/forum/viewtopic.php?t=7640 I can not find how is it done to a Turnygy 9x or The 9xtreme board. All I find is for the tarani...

Is it possible at this time with this board? (Send telemetry from the radio to an android device )
Thanks

Ok, not the same, but at lease the quadcopter battery volts or number of sat, as you said "or just not everything"

using: - Taranis Mavlink APM Pixhawk Telemetry adapter or APM MavLink to FrSky SmartPort Converter (Airborne Projects) - XJT - X8R - Pixhawk -9Xtreme -Turnigy 9X and Assuming that all is configured and connected the right way. (as I have try all ,all , all combinations) There is no way to see the sa...

Yes I have try different values. And then have fully try all the differents categories on all 3 telemetry screens

It is not my case, I only get Rx= 84, A1=0.52 Swr 0.

Over a Pixhawk I am Using XJT Module , X8R receiver and "APM MavLink to FrSky SmartPort Converter" from airborneprojects.com, connected to S.Port on both sides and only have RSSI / SWR. erSky9x settings: erSky9x / Model Setup / Protocol / External: ON / Proto: PXX and Type: D16. MissionPla...