openrcforums

Hi Mike,
That is awesome. Thanks for the re-insurance.
Even though I think I know what I am doing, it just feels better when someone with the knowledge tells you.

Hi, First off I will apologize if the answer is here, I have been looking and it seems everything I read is outdated or I just don't understand. I have the 9xr Pro with the firmware ersky9x r217 with the XJT transmitter module and the X8R receiver and my FC is the Naza M-Lite. Can I use the sbus to ...

Hi Mike, Well I feel dumb now. All is good. When I was changing the weight to -100 I was changing P3 when it was P1 that I should be changing. When I was looking at the main screen like you said I notice what I was doing wrong. So yes now both of my models in the radio are good with my Off/Coarse Lo...

I will take a look at that when I get home later today.
Thanks.

I changed the weight to -100. Did nothing. Maybe I'll change what I am doing with that P3. In other words I never use Home Lock just Coarse lock. So I could just remove the 3 way switch, install the P3 and use another 2 position switch that is not in use for that control. or replace the D8R-XP with ...

Odd if that is caused by the change from using servo outputs to using a SBUS output. How do you use this switch in the mixer/logical switches? Mike. Hi, In the Mixer CH5 Source = P3 Weight = 100 Offset = 0 Fix Offset = OFF Use Output = ON Trim = OFF Curve ------ Switch = ---- Modes = 0123456 Warnin...

It should just work as before, no changes needed. Mike. Only had to switch two channels around in the transmitter, Channel 7 and 8. Works thanks again. I do have one question on this: Since I changed from Traditional to SBUS my 3 way switch I installed in place of HOV PIT for OFF/Coarse Lock/Home L...

Awesome, I'll give it a try. Thanks for the reply.

Hi, Since you guys say there are no dumb questions let me ask this one. If I have the XJT module and the X8R connected to a Naza M V2 I can use SBUS and still have all the channels I had when it was connected as Traditional? Would I have to do a complete setup of the transmitter again? P.S. My wife ...

Thanks Mike.

It will just work with the 'X' series receivers. A new XJT will most likely have the "EU firmware" so won't support 'D' series receivers. Mike. Hi All, New here and installed my Smarties board in my LlySky TH9x about two weeks ago and works great so far. You mentioned that with the XJT wi...