openrcforums

Hello
Thank you all for your work I tried to understand and simplify
Here is the result
Jmi
Hope this help

thanks
its a hold voice system....ok
i add 10$ with new board to remove low eeprom memory .........
next step add a rotary encoder
and maybe hall effect sensor pots (what about precision?)is it better
best regards jmi

the french manuel i had trad in 2012 for R 762 is now hold version v1 97- mike er9x-r820 frsky 128 telemetry mod and voice with mp3 module hard done for the eeprom i had transfered the eprom from my 64 board to eepe and from eppe to the new board i think due to hold eprom it change frsky mode in the...

Hello thanks João I have to learn with my new board :? waste some chapters of my french manual i solve thr not iddle changing the stick mode and switch errors with frsky mod done like you suggest ( p 5 of the manual ) i have a look at the second page but no comment on manual ?? '(see attached ) cali...

hello yes agree with you its hold version m64 on 128 k chip to keep the settings first .possible in Jason 'tuto after that i tried as you suggest and the failures of switch thr an ail have appeared To return to the first version not easy( bugs in series) i just have seen now ON openrcforum they advi...

hello
i had installed a spare board with green and firm attached its running but i cant benefit of the supplementary space
it said me eeprom low mem is it possible to "repair" this
best regards
jmi

hello
DIYS
A switch on top of the stick

JMI

Hello
IF you can't DIYS /Self-Centering for throttle
http://rctanksaustralia.com/shop/index. ... cts_id=125
JMI

hello
nice job
do not forget to calibrate correctly
page1/6 ;name ; i don't arrive to change the letters with sticks is it normal
jmi

Kilrah wrote:En Français on a déjà tout ce qu'il faut
https://code.google.com/p/open9x/wiki/Open9x_Manual_FR

hello
i hope 1947 update version to use it correctlly with halcion in efficient vario mode

please ROB an idea
jmi

hello
Open9xFeatures; french translation
jmi

hello
last edit of french r782 FRSKY manuel "screens'
improvement proposals accepted with pleasure
best regards JMI

ok I understand better if I look for things that are not now
and i have changed sd card to FAT : no trouble like that
thanks
jmi

My goal being to run the altimeter Halcion as an audio variometer if possible
with open
viewtopic.php?f=49&t=797&p=12905#p12905
jmi

agree with you after 4 differents try
but no results satisfactory and no screns like in this posts
viewtopic.php?f=45&t=2805&p=39803#p39544
jmi

hello
trying to convert to open with audio
my radio playing sounds correctly with er9x before no trouble
i have changed with french firm and audio voice card file without sucess
may have two files (language not important) just to check and play
best regards
jmi

hi Rob ,
agree with you.
have you a magic sentence for clear explanation of Gvars better than me in ER9X. I try to translate please

jmi

Rob Thomson wrote:Should this be in the open9x user guide? Not the er9x guide?

Think you may have got the wrong thread.

Sent from my GT-I9300 using Tapatalk 2

my friend in charge of reading do not understand and give me an other explanation of Gvars . please update P34 de la notice open9X Les variables globales se substituent à la valeur numérique d'un taux de mixage, de dual-rate ou d'expo. Ces variables peuvent être, au besoin, liées à une fonction asso...

hello
last edit of french r782 FRSKY manuel
improvement proposals accepted with pleasure especially for screenshots
best regards JMI

Hi Bertrand
sticks are homemade or purchased and adapted ? and if DIYS where to find micro switches ?

at the same time which version of open9 must be used for my Halcion vario Please?
Best regards Jmi

hello In fact I have not changed firmware for a while. 1° I only have one transmitter big work rechecking all the pages, trying to understand the purpose without asking stupid questions and update the manual and 2° especially aircraft settings not to be affected : Flight SAFETY first concern I thoug...

hello i think Kaos give a solution to be applied with box temperature slightly warm . trouble shooting performed y found a bad soldering on rx line and recover frsky alarm my request is for alarm configuration is it possible to generate a voltage alarm with speaker? my setup er9x-r771 frskynt versio...

hello concerning the dismantling of the pcb is not stuck ,in force simply entered a temperature slightly warm can help previous post on the mod was made on a module "DFJR COMBO" with open9x firm belonging to a friend i have no complains currently I think I have a fault on my transmitter re...

hello check your sectional view prop profile ; is like a wing profile ; then the leading edge have to be at the front and attack the wind during rotation
jmi

And does setting the module's alarms from the 9x work? That's what requires cutting a track. THANKS Merci I thought my programmmation OPEN9 wasn"t full for alarms so no matter the trace is cut? MOSI or MISO only 1? concerning pads I had scratched the varnish surface on the 6 and 7 from 12 and ...

Hello
I connected links mosi and miso from FrSky JR module without disconnecting circuit on the board and without a converter like the tutorial open 9 x and it works with two resistors of 1 k
jmi

To my surprise my radio came with a void in the back. I thought they would ship out a blank module. Does anyone have a blank they have left over due to an external FrSky upgrade? Will give $$ for it. :-) If so, PM me pls. http://www.rc-cam.com/forum/index.php?/topic/1239-spektrum-jr-tx-module-conve...

hello
cable db9
jmi

hello having forsaken a little forum I thought modify my first eemarte card that was not good with http://emartee.com/product/42232/WTV020SD% 2020S% 20Music%% 20Sound 20Chipset can you confirm the usefulness of this is that the v1.0 on it soft ? or is it better to build the last card you are develop...

Hello
for me its the same and for the skeptics or the management of bad faith : a switch with only use cuckoo!!!
jmi