Hello
Thank you all for your work I tried to understand and simplify
Here is the result
Jmi
Hope this help
Search found 103 matches
- Sat Dec 17, 2016 1:36 pm
- Forum: Hardware
- Topic: 9x upgrade to ATmega128A3-AU + Reboot With Horiz Trims
- Replies: 167
- Views: 102541
- Thu Dec 15, 2016 2:03 pm
- Forum: 9Xtreme upgrade board
- Topic: Problem with last new Hobbyking Turnigy 9X transmiters.
- Replies: 189
- Views: 215208
Re: Problem with last new Hobbyking Turnigy 9X transmiters.
thanks
its a hold voice system....ok
i add 10$ with new board to remove low eeprom memory .........
next step add a rotary encoder
and maybe hall effect sensor pots (what about precision?)is it better
best regards jmi
its a hold voice system....ok
i add 10$ with new board to remove low eeprom memory .........
next step add a rotary encoder
and maybe hall effect sensor pots (what about precision?)is it better
best regards jmi
- Thu Dec 15, 2016 1:40 pm
- Forum: 9Xtreme upgrade board
- Topic: Problem with last new Hobbyking Turnigy 9X transmiters.
- Replies: 189
- Views: 215208
Re: Problem with last new Hobbyking Turnigy 9X transmiters.
the french manuel i had trad in 2012 for R 762 is now hold version v1 97- mike er9x-r820 frsky 128 telemetry mod and voice with mp3 module hard done for the eeprom i had transfered the eprom from my 64 board to eepe and from eppe to the new board i think due to hold eprom it change frsky mode in the...
- Thu Dec 15, 2016 1:10 pm
- Forum: 9Xtreme upgrade board
- Topic: Problem with last new Hobbyking Turnigy 9X transmiters.
- Replies: 189
- Views: 215208
Re: Problem with last new Hobbyking Turnigy 9X transmiters.
Hello thanks João I have to learn with my new board :? waste some chapters of my french manual i solve thr not iddle changing the stick mode and switch errors with frsky mod done like you suggest ( p 5 of the manual ) i have a look at the second page but no comment on manual ?? '(see attached ) cali...
- Thu Dec 15, 2016 1:47 am
- Forum: 9Xtreme upgrade board
- Topic: Problem with last new Hobbyking Turnigy 9X transmiters.
- Replies: 189
- Views: 215208
Re: Problem with last new Hobbyking Turnigy 9X transmiters.
hello yes agree with you its hold version m64 on 128 k chip to keep the settings first .possible in Jason 'tuto after that i tried as you suggest and the failures of switch thr an ail have appeared To return to the first version not easy( bugs in series) i just have seen now ON openrcforum they advi...
- Wed Dec 14, 2016 2:00 pm
- Forum: 9Xtreme upgrade board
- Topic: Problem with last new Hobbyking Turnigy 9X transmiters.
- Replies: 189
- Views: 215208
Re: Problem with last new Hobbyking Turnigy 9X transmiters.
hello
i had installed a spare board with green and firm attached its running but i cant benefit of the supplementary space
it said me eeprom low mem is it possible to "repair" this
best regards
jmi
i had installed a spare board with green and firm attached its running but i cant benefit of the supplementary space
it said me eeprom low mem is it possible to "repair" this
best regards
jmi
- Tue Feb 04, 2014 1:17 pm
- Forum: openTx for FrSky radios
- Topic: stick mod
- Replies: 0
- Views: 1787
stick mod
hello
DIYS
A switch on top of the stick
JMI
DIYS
A switch on top of the stick
JMI
- Sat Jul 06, 2013 9:50 pm
- Forum: Hardware Mods
- Topic: Turnigy 9X Self-Centering Lever
- Replies: 0
- Views: 3158
Turnigy 9X Self-Centering Lever
Hello
IF you can't DIYS /Self-Centering for throttle
http://rctanksaustralia.com/shop/index. ... cts_id=125
JMI
IF you can't DIYS /Self-Centering for throttle
http://rctanksaustralia.com/shop/index. ... cts_id=125
JMI
- Fri Apr 05, 2013 8:46 am
- Forum: er9x
- Topic: er9x development
- Replies: 3179
- Views: 1461079
Re: er9x development
hello
nice job
do not forget to calibrate correctly
page1/6 ;name ; i don't arrive to change the letters with sticks is it normal
jmi
nice job
do not forget to calibrate correctly
page1/6 ;name ; i don't arrive to change the letters with sticks is it normal
jmi
- Mon Mar 04, 2013 7:54 pm
- Forum: openTx
- Topic: Manuals with more details ?
- Replies: 24
- Views: 10015
Re: Manuals with more details ?
helloKilrah wrote:En Français on a déjà tout ce qu'il faut
https://code.google.com/p/open9x/wiki/Open9x_Manual_FR
i hope 1947 update version to use it correctlly with halcion in efficient vario mode
please ROB an idea
jmi
- Mon Mar 04, 2013 12:39 am
- Forum: openTx
- Topic: Manuals with more details ?
- Replies: 24
- Views: 10015
Re: Manuals with more details ?
hello
Open9xFeatures; french translation
jmi
Open9xFeatures; french translation
jmi
- Mon Mar 04, 2013 12:04 am
- Forum: er9x
- Topic: ER9X User Guide
- Replies: 124
- Views: 151410
Re: ER9X User Guide
hello
last edit of french r782 FRSKY manuel "screens'
improvement proposals accepted with pleasure
best regards JMI
last edit of french r782 FRSKY manuel "screens'
improvement proposals accepted with pleasure
best regards JMI
- Sun Feb 24, 2013 5:46 pm
- Forum: openTx
- Topic: Programming Audio in Open9X
- Replies: 32
- Views: 14682
Re: Programming Audio in Open9X
ok I understand better if I look for things that are not now
and i have changed sd card to FAT : no trouble like that
thanks
jmi
and i have changed sd card to FAT : no trouble like that
thanks
jmi
- Sun Feb 24, 2013 4:30 pm
- Forum: openTx
- Topic: Programming Audio in Open9X
- Replies: 32
- Views: 14682
Re: Programming Audio in Open9X
My goal being to run the altimeter Halcion as an audio variometer if possible
with open
viewtopic.php?f=49&t=797&p=12905#p12905
jmi
with open
viewtopic.php?f=49&t=797&p=12905#p12905
jmi
- Sun Feb 24, 2013 4:13 pm
- Forum: openTx
- Topic: Programming Audio in Open9X
- Replies: 32
- Views: 14682
Re: Programming Audio in Open9X
agree with you after 4 differents try
but no results satisfactory and no screns like in this posts
viewtopic.php?f=45&t=2805&p=39803#p39544
jmi
but no results satisfactory and no screns like in this posts
viewtopic.php?f=45&t=2805&p=39803#p39544
jmi
- Sun Feb 24, 2013 3:32 pm
- Forum: openTx
- Topic: Programming Audio in Open9X
- Replies: 32
- Views: 14682
Re: Programming Audio in Open9X
hello
trying to convert to open with audio
my radio playing sounds correctly with er9x before no trouble
i have changed with french firm and audio voice card file without sucess
may have two files (language not important) just to check and play
best regards
jmi
trying to convert to open with audio
my radio playing sounds correctly with er9x before no trouble
i have changed with french firm and audio voice card file without sucess
may have two files (language not important) just to check and play
best regards
jmi
- Fri Feb 08, 2013 9:56 am
- Forum: er9x
- Topic: ER9X User Guide
- Replies: 124
- Views: 151410
Re: ER9X User Guide
hi Rob ,
agree with you.
have you a magic sentence for clear explanation of Gvars better than me in ER9X. I try to translate please
jmi
agree with you.
have you a magic sentence for clear explanation of Gvars better than me in ER9X. I try to translate please
jmi
Rob Thomson wrote:Should this be in the open9x user guide? Not the er9x guide?
Think you may have got the wrong thread.
Sent from my GT-I9300 using Tapatalk 2
- Fri Feb 08, 2013 1:14 am
- Forum: er9x
- Topic: ER9X User Guide
- Replies: 124
- Views: 151410
Re: ER9X User Guide
my friend in charge of reading do not understand and give me an other explanation of Gvars . please update P34 de la notice open9X Les variables globales se substituent à la valeur numérique d'un taux de mixage, de dual-rate ou d'expo. Ces variables peuvent être, au besoin, liées à une fonction asso...
- Thu Feb 07, 2013 11:20 am
- Forum: er9x
- Topic: ER9X User Guide
- Replies: 124
- Views: 151410
Re: ER9X User Guide
hello
last edit of french r782 FRSKY manuel
improvement proposals accepted with pleasure especially for screenshots
best regards JMI
last edit of french r782 FRSKY manuel
improvement proposals accepted with pleasure especially for screenshots
best regards JMI
- Thu Feb 07, 2013 12:29 am
- Forum: Hardware Mods
- Topic: Switches on the sticks
- Replies: 6
- Views: 5057
Re: Switches on the sticks
Hi Bertrand
sticks are homemade or purchased and adapted ? and if DIYS where to find micro switches ?
at the same time which version of open9 must be used for my Halcion vario Please?
Best regards Jmi
sticks are homemade or purchased and adapted ? and if DIYS where to find micro switches ?
at the same time which version of open9 must be used for my Halcion vario Please?
Best regards Jmi
- Tue Feb 05, 2013 1:36 am
- Forum: FRSky Telemetry Mods
- Topic: FrSky telemetry mod without RS232 level converter
- Replies: 128
- Views: 130724
Re: FrSky telemetry mod without RS232 level converter
hello In fact I have not changed firmware for a while. 1° I only have one transmitter big work rechecking all the pages, trying to understand the purpose without asking stupid questions and update the manual and 2° especially aircraft settings not to be affected : Flight SAFETY first concern I thoug...
- Mon Feb 04, 2013 9:59 am
- Forum: FRSky Telemetry Mods
- Topic: FrSky telemetry mod without RS232 level converter
- Replies: 128
- Views: 130724
Re: FrSky telemetry mod without RS232 level converter
hello i think Kaos give a solution to be applied with box temperature slightly warm . trouble shooting performed y found a bad soldering on rx line and recover frsky alarm my request is for alarm configuration is it possible to generate a voltage alarm with speaker? my setup er9x-r771 frskynt versio...
- Sun Feb 03, 2013 9:30 am
- Forum: FRSky Telemetry Mods
- Topic: FrSky telemetry mod without RS232 level converter
- Replies: 128
- Views: 130724
Re: FrSky telemetry mod without RS232 level converter
hello concerning the dismantling of the pcb is not stuck ,in force simply entered a temperature slightly warm can help previous post on the mod was made on a module "DFJR COMBO" with open9x firm belonging to a friend i have no complains currently I think I have a fault on my transmitter re...
- Sun Feb 03, 2013 7:45 am
- Forum: er9x
- Topic: [PROBLEM] Turnigy 9xr left gimbal doesn't respond
- Replies: 8
- Views: 7560
Re: [PROBLEM] Turnigy 9xr left gimbal doesn't respond
hello check your sectional view prop profile ; is like a wing profile ; then the leading edge have to be at the front and attack the wind during rotation
jmi
jmi
- Sun Dec 16, 2012 11:04 am
- Forum: FRSky Telemetry Mods
- Topic: FrSky telemetry mod without RS232 level converter
- Replies: 128
- Views: 130724
Re: FrSky telemetry mod without RS232 level converter
And does setting the module's alarms from the 9x work? That's what requires cutting a track. THANKS Merci I thought my programmmation OPEN9 wasn"t full for alarms so no matter the trace is cut? MOSI or MISO only 1? concerning pads I had scratched the varnish surface on the 6 and 7 from 12 and ...
- Sun Dec 16, 2012 1:49 am
- Forum: FRSky Telemetry Mods
- Topic: FrSky telemetry mod without RS232 level converter
- Replies: 128
- Views: 130724
Re: FrSky telemetry mod without RS232 level converter
Hello
I connected links mosi and miso from FrSky JR module without disconnecting circuit on the board and without a converter like the tutorial open 9 x and it works with two resistors of 1 k
jmi
I connected links mosi and miso from FrSky JR module without disconnecting circuit on the board and without a converter like the tutorial open 9 x and it works with two resistors of 1 k
jmi
- Fri Dec 07, 2012 4:29 pm
- Forum: er9x
- Topic: Audio (voice) - Stock 9X PCB
- Replies: 4092
- Views: 1626126
Re: Audio (voice) - Stock 9X PCB
To my surprise my radio came with a void in the back. I thought they would ship out a blank module. Does anyone have a blank they have left over due to an external FrSky upgrade? Will give $$ for it. :-) If so, PM me pls. http://www.rc-cam.com/forum/index.php?/topic/1239-spektrum-jr-tx-module-conve...
- Wed Nov 28, 2012 12:49 am
- Forum: er9x
- Topic: Audio (voice) - Stock 9X PCB
- Replies: 4092
- Views: 1626126
Re: Audio (voice) - Stock 9X PCB
hello
cable db9
jmi
cable db9
jmi
- Sat Nov 03, 2012 10:59 am
- Forum: er9x
- Topic: Audio (voice) - Stock 9X PCB
- Replies: 4092
- Views: 1626126
Re: Audio (voice) - Stock 9X PCB
hello having forsaken a little forum I thought modify my first eemarte card that was not good with http://emartee.com/product/42232/WTV020SD% 2020S% 20Music%% 20Sound 20Chipset can you confirm the usefulness of this is that the v1.0 on it soft ? or is it better to build the last card you are develop...
- Fri Oct 12, 2012 6:45 pm
- Forum: er9x
- Topic: Audio (voice) - Stock 9X PCB
- Replies: 4092
- Views: 1626126
Re: Audio (voice) - Stock 9X PCB
Hello
for me its the same and for the skeptics or the management of bad faith : a switch with only use cuckoo!!!
jmi
for me its the same and for the skeptics or the management of bad faith : a switch with only use cuckoo!!!
jmi