openrcforums

hello
a 8 ohm 0.5W speaker with the audio card, witout mod for the rest and using rssi alarm from FRSKY module
JMI

if too old at first start the welcome message disappear jmi

C.João wrote:would this sound module read a MMC card ? I have a 512Mb old one. but I could not test it yet cos' I don't have any output from my module...

hello DAN er9x updating to this mode is it too late to order :oops: best regards J MICHEL Hi, wrong place for this I know, but I'm getting ready to ship out PCB's to folks who've only ordered PCB's (Wheels and pins will be on their way soon), and it's getting pretty confusing out there. Folks have r...

hello good question i am not sure.... user guide 1/6 Flash on beep: Flashes the backlight on timer beeps. Light switch: This chooses a switch which can be used to turn on a backlight if connected. Light off after: When this is not OFF any keypress will turn on the backlight and turn it off after the...

confident in your explanation i tried to start from a file empty your setting are ok page 10/11 A1 channel 255 - alarm --- < xx alarm --- < aa the trouble seems to came from the values saved for FRSKY module not systematic and then after registration I need to restart the transmitter and audio volta...

hello
A1 is selected on - to have from 0 to 255pts
my eepe revision is 345 and don't show the voices settings
flying this morning with the first alarm "low speed" and without 1° FRSKY alarm is better
jmi

yes i confirm agree for inner : < and yes voltage of sensor pressure is using the raw telemetry values out of A1 and the audio is reading it as volts. the programming is not according yours but like that the result is like my hoping alarms in good ranking performing flight test this afternoon ; the ...

flight test performed audio alarms too late to be used directly sorry for my english (i try to upgrade previous message ) i have now 8/11 cus sw sw1 v inner ofs A1 = 22 S2 sw2 v inner ofs A1 = 22 -- sw3 v inner ofs A1 = 23 -- 9/11 saf sw number voice Sv 8 CH1 V SW1 177 (PULL UP) CH2 V SW3 176 ( low ...

sorry for my english (i try to upgrade prvious message ) i have now 8/11 cus sw sw1 v inner ofs A1 = 22 S2 sw2 v inner ofs A1 = 22 -- sw3 v inner ofs A1 = 23 -- 9/11 saf sw number voice Sv 8 CH1 V SW1 177 (PULL UP) CH2 V SW3 176 ( low speed) and announcement is ok from on ground between 17 & 22 ...

hello
walking step by step now the bips alarm are of ok
with speed too "low pull up" ok
*the trouble is i have always speed "voltage annoucement " without choice of spacing a real parrot not acurate

thanks João its true :lol: now my radio edit at same time alarm bip voltage : yel or red , voltage audio announcement 1.6v and the audio safety message "pull up" i am trying to remove voltage audio to ear only the last "pull up. pull up " [and if some one can confirm : A1 ALARM &...

yes i use a pressure sensor on A1 and i adjust mini speed with 2 alarms voltage : low speed and stall
and i am asking if it is possible to control the voice with this entrys
thanks

jhsa wrote:I don't know if I understand.. You want an alarm for low speed and you have the speed sensor on A1??

Joäo

hello help please is it possible to generate a voice message in accordance with an 'A1 alarm' for exemple; for low speed beeper a message like "pullup" Controlled by the line "alarm ;color ;inner than xx" actually i arrive to programm and hear the A1 value in volts best regards

Hello do you think that a general with low drop power supply would more powerful added value while allowing 2 elements lipos safe (like this one found before) jmi The voice board as described in Mike's PDF in the first post needs to be powered by the raw battery voltage, NOT 5V. It has its own 5V (a...

Hello playing with the sounds i think the lengh of the name message is eating a part of welcome message jmi I'll have to do some careful testing to find why the 'welcome' message gets cut off. If anyone has a guaranteed method to make it happen it will be useful. It does happen to me sometimes but I...

Thanks for help my mod is completed
jmi

hello i had changed the 150 ohm resistor by a 560 ohm and connected the black an red wires of the HK backlight without the connectors interfacing direct on the board it works actually thanks for replys jmi JEANALTAYR, what do you want to change? It looks to me like that is just a switch to turn the ...

HELLO Is it possible to change the portion circled by the schema of this post safely? This is the diagram for the constant current source that holds the brightness of the LED backlight (nearly) constant and independent of the supply voltage. I used BC347 instead of BC348 and 22 Ohm (without 1N4007) ...

HELLO I received my new card emartee two lines now it works with FAT formatted card128MB and a speaker 8ohms my headphones were not adapted over time to measure my research I had changed everything and I had added failures ...... :oops: THANKS FOR HELP i think i found the trouble: approximate readi...

HELLO

i think i found the trouble: approximate reading post and saving none buying my card on ebay ........ i asked the seller no answer
Note: The two-line serial control mode version of the module is required and that it explicitly has to be stated when placing an order.
hope this help
jmi

hello thank you to those who responded balance sheet No short circuit i have soldered a led to the output BL it works according to the radio 74 HC is not totaly dead is it dangerous because like that HK back light will be easy to wire :oops: I formatted the card on a computer directly under xp choic...

i have soldered 74 hc directly may be is dead
jmi

ok formated to FAT BETWEEN FAT & FAT 32 SAME...
is it possible to check the board without radio or the interface ?
thanks jmi

sorry to have confused
i use my camera to load
I m not shure to arrive to format in FAT 16 actually indication is FAT
MAY BE THE KEY
thanks jmi

now i have wave files on it and removed the file generated by my camera but its always in trouble
i go to drink beer or champagne to fest exams son and continue later
thanks

ok done and the result is a list of
xxxx. ad4 is it true for mp3 module
thanks jmi

hello i am trying to trouble shoot my sound card: consumption 6 mA mode beeper voice when i arrive at 1minute trigger just a very very slight crack in the speaker and a increase of consumption to 8 or 9 mA mode Pi spaeaker same behaviour is it necessary to select a particular voice and where? i disc...

hello
I FOUND only LF 33 CV TO220 and put on top of the other reg .


JMI

post deleted

thanks kilrah
i have to work for upgrade now....
jmi