openrcforums

I have attached the zip file to this post. I did not build this version someone else did, I forget who, but it works for me and it also worked on Mint 18.3. Let me know how you go with it and I will help you if I can.

Dave

I have a 64-bit version of eepskye that I am running on Mint-19 if that is of any use to you.

Dave

That version did have a problem with some radio types. I've just posted an updated version (for windows) that doesn't have the problem. It seems the editing window may appear "squashed" at times due to the (default) screen font. I'm looking into that. Mike That fixed the problem, thanks o...

Mike, I cannot edit a switch used in a mix. The dropdown list box is not populated. This is version P423 dated 26/01/2019.

rusiruneranjan wrote: ↑Sat Dec 22, 2018 5:56 am I bought lcd from aliexpress and it's working.
https://www.aliexpress.com/item/Flysky- ... 4c4d8hU5Tr

Thank you for that link, I searched AliExpress but did not find that one. I will order one today.

If you do have it I would be interested, but postage may kill the deal.

I have recently been given a friends Eurgle with a 9Xtreme board fitted. This has a dead LCD in it and I have not been able to source a replacement. HobbyKing do not have any available, I have also checked AliExpress and Banggood to no avail. I found this 2.9"/128x64 Blue COG LCD Module Graphic...

Check the RTC does run when you set it (I think you may have already done that). The battery supplies power to the RTC chip (U2, a MCP79410-I/SN device) via resistor R81 (100 ohms) and diode D7, ending at pin 3 of U2. Check the battery voltage reaches each of these. Mike The RTC does not run, and t...

Check the RTC does run when you set it (I think you may have already done that). The battery supplies power to the RTC chip (U2, a MCP79410-I/SN device) via resistor R81 (100 ohms) and diode D7, ending at pin 3 of U2. Check the battery voltage reaches each of these. Mike The RTC does not run, and t...

My RTC is no longer working, I have replaced the CR2032 battery but it makes no difference. There is 3.2v measured at the battery holder but that's it.

Any assistance would be appreciated.

Dave

Please see picture.. João Just as I thought the +ve face is to the left which is the way mine is facing. I have replaced the battery with a new one and it makes no difference. João rather than clutter up this thread, I will open a new one in the 9VR-Pro thread with this problem. Thanks for all your...

Good that is working :) For the RTC I guess you need Mike's opinion on this, as he knows much more about the radio than I do. If you say that the RTC battery Is correctly installed and the voltage is 3.3V, then it should be working :o I would check again the battery polarity and that the connection...

Yep, it looks like you might have found the problem :) Monday radio, after the weekend some workers do not know where is right and left :D João Hey easy there, they are not the only ones to have Monday problems, I can have them on any day of the week. :mrgreen: :mrgreen: Swapping the two wires fixe...

The LH trim switches connect to the main board on J4, connections 5 and 6. Try swapping these over. You should be able pull the crimps out of the housing to do that. Mike Thanks Mike I will do that tomorrow, it's getting late and of course my low battery alarm on the TX decided to go off, so I will...

You can try the following, go to the "Radio Setup/Hardware" menu, scroll down to the stick reversing option and select it. Keep pressing the right key until the stick(s) that is giving problems is/are reversed. See if all sticks now move in the same direction of their trims. But before yo...

It looks like your Right Vertical stick is reversed in hardware.. the others seem to be OK.. the rudder is left horizontal, right? so O68B is stick to the right, and 0163 is stick to the left? if so, this sem to be the expected values. You might need to calibrate your sticks though.. The Right vert...

I think we have seen a couple radios being shipped with one or more gimbal connections reversed.. Probably Monday radios. But to check if it is an hardware issue please go to the "Radio Setup / DiagANA" menu and post the values of the first 4 lines. Each line represents a stick. LH - Left...

I have a similar problem with my 9XR Pro, I have not used this radio for some considerable time and never noticed this before. I flashed the latest test release before I went to use it. I activated the Hardware menu and none of the sticks are highlighted. This radio is Mode 1 and it is the Rudder ch...

The test version link on that site directs you to the current test version thread, or am I missing something.

Dave

Hi João,

Thanks for that information, much appreciated.

Dave

Where are the latest test versions, I have seen references to versions g3, g4 and g5 but they are not in the usual place or if they are my system does not show them.

Hi João,

I think that was where I got these files in the first place, but I will go back and check. I am aware of and have used TTSAutomate to generate specific model name files and several customised files for other uses.

Dave

I know it has been discussed in the past but I cannot find this now. I am using a countdown time on my QX7 and just recently added the Beep Countdown, the problem is that from 5 seconds down it does not report all values, I get 5 secs, beep, 3 secs beep and 1sec. Obviously there is a length error wi...

Is there a similar function in ersky9x to the discover sensors in open-tx. I am in the process of setting up a G-R8x for use in a new 3M glider and a automatic function to find sensors would be nice.

One thing I noticed with all that radio programming I noticed that you do not have the SWCH option for a source and also with SA SB SC etc options SC text description identifies it in two different places as Scaler 1. This is immediately after CH32 in the list of options, later in the list you have ...

Thanks for your help Mike, I have something working, I think, I will put it in my old sacrificial model and get it up two mistakes high and then try it out. I will let you know how things go.

Dave

Can you run the S6R script I posted (works with S8R)? If so, what is "Quick Mode" set to? Extract from the text file for the firmware where this was added: "2017.5.16 1.add config convenient Mode 2.defualt mode is simpleMode 3.In Convenient Mode: channel10 <mid starter mode =mid midd...

Oops, sorry about that - not sure how that happened :( I meant this: https://www.rcgroups.com/forums/showthread.php?2743245-FrSky-S6R-6CH-Receiver-With-3-Axis-Stabilization-With-Smart-Port-Telemetry/page319 Too Many Toys has created a separate, excellent, thread about set up to help (now a closed t...

Hi suncoaster, Just FYI - You might check what version of firmware you have installed in the S6R/S8R - there were recent changes made by FrSky which changed the mode selection of the Ch10/Ch11 combinations - a good place for further information, in addition to this thread here, is http://openrcforu...

OK, progress made. The new version of eepskye fixes the HALF replacement issue. The main problem now is that the only way that I have normal operation (without stabilisation) is with SCv and SDv. Any other setting of these switches has stabilisation active. I have attached the eepm file for this mod...