openrcforums

What's the latest functionable release for th9x (stockboard) w/frsky telemetry?
On Companion 2.0 the firmware "OpenTX for 9X Board" (frsky selected) comes without telemetry (page non existent, switches wrong).
regards
manu

The reason why I insist on this is make it easier for people not get used to this system. Recently I read in the manual of a model: "When setting the brake (on a glider), add 20% to the elevator." I tried the most intuitive way IMHO and added this to the elevator mix: (+20%)MAX Switch(ELE)...

Sorry for returning to this, but for me it is not logical by definition, why SLOW and DELAY wont affect the output of switched mixes (or mixer lines). Why does this not work? CH12 (+100%)MAX Switch(ELE)Slow/u0.5:d0) But this one does! CH13 (+100%)MAX Switch(ELE)Slow/u0.5:d0.1) tested on opentxfor sk...

Hi FigNewton
This might be a solution! But the switch value (-8 meters) is way to coarse. Why can't I select a smaller value? Like -1 Meter?
regards
manu

Oh yes. I'm pretty curious how this works out.

For a DLG it would be terrific, if the altitude would be played automatically after climb/throw. Say, when it's starting to sink, play the actual altitude. How about: - store altitude in a GVAR 2 times a second - if (alt < GVAR) play alt(or GVAR) once I suppose this is not possible at the moment but...

I know, it's somewhere but I don't find the pin assignment in the module bay.
Does anybody know?
regards
manu

Just thinking loud:
Isn't it. possible put in a relais controlled by the current of plugged in RF Module. When there is current the Relais should interrupt the connection of the built in Module?

Yes!!
Long mixes names.
Just longer than 5 chars.

Telemetry A1 channel settings are zeroed when flashing eeprom into sky9x.

c9x v1.05 still crashes when flashing eeprom with fw compatibility checked.

I are right. Just that particular on I thought was my latest backup is corrupted, bad luck. Earlier ones are ok to load.

My main problem is:
Is there a way to restore my model settings of a former fw release?

Now I'm in trouble. This morning I updated c9x to to the latest release. At the 1st attempt to burn a new fw into sky9x, c9x crashes. The new fw is loaded but the model memory/eeprom is reformatted. I tried to load a old eepe file from the pc, tried to restore a model from the sd card. Both fails wi...

Not for me.
It's just a bit irritating in c9x when setting this option try to update, nothing happens.

Now I tested also open9x-stock-jeti-en-r1464.hex, it works, telemetry is visible.
In the display instead of "JETI" there is "16" in the upper left corner.
regards
manu

just tested Revision up to r777, they work.
Is your data connection to the jeti rf module ok.
I get this blank screen (only "JETI") when I cut the data line connection (for flashing as example).
regards
manu

Ok, I tested all er9x-jeti versions from r772 to r777, downloaded from code.google.com.
Focus on telemetry functions they all work! - strange -
I tested both from c9x and eepe flashing the latest version, works.
On c9x the option er9x-noht-jeti fails to download.
regards
manu

How /wherefrom do I get the specific previous builds? From code.google.com I only get the latest or the stable build.

ok. I tried both er9x and open9x: er9x-jeti.r777: There is a kind of telemtry screen but without usable data. I doubt that jeti can provide the data the same as frksy does. open9x-stock-jeti-en-r1464: Pretty the same telemetry screen as bertrand posted: http://openrcforums.com/forum/viewtopic.php?f=...

Download of new fw version er9x-jeti-noht fails: --------------------------- companion9x --------------------------- Herunterladen fehlgeschlagen: Error downloading http://er9x.googlecode.com/svn/trunk/er9x-jeti-noht.hex - server replied: Not Found. --------------------------- OK -------------------...

I have a er9x r736 running with jeti. As I know the hole logic sits in the rf module, the tx just acts as a JETI Box, transfers the date to the display. Altough I changed to FrsSky, for me jeti was the starter to get into the 9x story, so please leave it alive. I have the hardware, please let me kno...

Romolo wrote:Ok, in 1452 in the hardware tab of general views (7/8), there is a line reporting Coproc.
Report the number you see there.

CoProc. is 0181, LCD Normal.
Thx for advising.
manu

my actual version on Sky9x is: open9x-arm-symlimits-autoswitch-dblkeys-ttsen-en r1452. regards manu Yes on sky9x there is a coprocessor and a backup battery... You need to load an app to the coprocessor and add a backup battery on a connector. Depending on your coproc status you will need to do diff...

Coprocessor? Backup Battery? On Sky9x?

just found the alarm values for TxBatt Capacity and Temperature in the Tx settings, nice.
New there is also a date & time, probabely for logging feature. But this is not "remanent", must be set on each power on, isn't it?
regards
manu

- When an alarm raises (consumption, temperature), it's displayed on the main screen in place of the Batt Voltage The temperature still seems a bit inacurate: cold start (room temp.) 47° > 224° after 3 minutes: 50° > 224° (Sky9x driven by a 2C Lipo). Is there a place to calibrate, to set the alarm ...

Thanks to all who have put all efforts in this project and even do, you are awesome!!
The mass storage functionality is a huge step forward.
Best regards
manu

downloaded and installed the files from new, still get the same error: --------------------------- File not found --------------------------- Board Description File not found: can't set "COPROCESSOR::appletAddr": parent namespace doesn't exist --------------------------- OK --------------...

ok, I copied the directory at91sam3s4-9x and the file boards.tcl into sam-ba_2.11 > tcl_lib (saved the old ones). While trying to flash I get this error: --------------------------- File not found --------------------------- Board Description File not found: can't set "COPROCESSOR::appletAddr&q...