Search found 22 matches
- Wed Jun 25, 2014 6:52 pm
- Forum: Hardware Mods
- Topic: Trying to mount the antenna outside my vehicle
- Replies: 2
- Views: 4124
Trying to mount the antenna outside my vehicle
I am trying to fly FPV using my indash DVD player but I'm concerned that the truck will block the 2.4ghz signal. I am using a removable FRSKY module in the back of my Turnigy 9x. Has anyone ever tried to make a sort of extention cord going from the pins on the back of the radio to the module? I woul...
- Tue Mar 11, 2014 7:20 pm
- Forum: er9x
- Topic: Can er9x display the flight mode on the main screen
- Replies: 6
- Views: 3600
Can er9x display the flight mode on the main screen
This may have been answered here but I don't know what terms to search and haven't been able to find a solution. I have a turnigy 9x with ER9x flashed. I am building a tricopter with Ardupilot 2.6 I have found several tutorials on how to set up the different flight modes: RTH, Land, Stabalize, etc. ...
- Fri Dec 21, 2012 1:55 pm
- Forum: Template Library
- Topic: rcpowers f35 2 airleons 2 elevons 2 rudders
- Replies: 4
- Views: 4344
Re: rcpowers f35 2 airleons 2 elevons 2 rudders
Thank you, I think I finally got it working in EEPE, just a quick question. Does it matter what channel goes to which surface. For example I have the elevons on channel 2 and 3, ailerons on 4 and 5 and rudders on 6 and 7. I assume if I plug them all into the correct location on the receiver it shoul...
- Mon Dec 17, 2012 2:37 am
- Forum: Template Library
- Topic: rcpowers f35 2 airleons 2 elevons 2 rudders
- Replies: 4
- Views: 4344
rcpowers f35 2 airleons 2 elevons 2 rudders
I am building the f35v2 on the RcPowers.com website. I am trying to figure out how to program er9x to control dual rudders, dual airelons, and dual elevons. Can someone please help me with a mix that will work, I am new to programming and can not figure out how to make everthing work properly. I ass...
- Mon Sep 03, 2012 10:19 pm
- Forum: er9x
- Topic: buddy box not recognizing slave ppm
- Replies: 8
- Views: 4776
Re: buddy box not recognizing slave ppm
again thank you, I knew it was something simple I was messing up. Changed to ppm and it worked right away. You guys are great thank you for all your help.
- Mon Sep 03, 2012 7:07 pm
- Forum: er9x
- Topic: buddy box not recognizing slave ppm
- Replies: 8
- Views: 4776
Re: buddy box not recognizing slave ppm
I have the dsm protocol set and no mixes selected. I have a basic 4 channel model. I think that the mixes and any expo settings will be taken from the Master Transmitter.
- Mon Sep 03, 2012 6:37 pm
- Forum: er9x
- Topic: buddy box not recognizing slave ppm
- Replies: 8
- Views: 4776
buddy box not recognizing slave ppm
First of all I want to thank everyone that have answered my many questions on various topics already it is much appreciated. I bought two Fly Sky 9x transmitters and upgraded them to Er9x-r771. I have made a removable DSM module for one of the transmitters (master) using a module from an HP6DSM whic...
- Mon Sep 03, 2012 2:02 pm
- Forum: er9x / gruvin9x / th9 based firmwares
- Topic: er9x trim not working??? need help
- Replies: 5
- Views: 4215
Re: er9x trim not working??? need help
you guys are great, I really appreciate all your help with my many questions. I feel bad asking because I have been asking a lot of questions but here goes. I finally got the ER9x transmitter working great with my Hobbyzone Champ. I have a second transmitter also loaded with ER9x but I can't set up ...
- Mon Sep 03, 2012 12:51 pm
- Forum: er9x / gruvin9x / th9 based firmwares
- Topic: er9x trim not working??? need help
- Replies: 5
- Views: 4215
Re: er9x trim not working??? need help
Thank you that worked! quick question though, I had calabrated the sticks right after I installed er9x, should I have to calibrate for every model I add? or did I just lose the calibration some how?
Thanks again for everyones help.
Thanks again for everyones help.
- Sun Sep 02, 2012 11:58 pm
- Forum: er9x / gruvin9x / th9 based firmwares
- Topic: er9x trim not working??? need help
- Replies: 5
- Views: 4215
er9x trim not working??? need help
I just installed er9x and did the dms mod using a module from hp6dsm. The mod worked great and I was able to bind to my hobbyzone champ right away. The problem I am having is as soon as the transmitter binds the elevator deflects downward about 50 percent and the rudder goes full right. I have tried...
- Sat Sep 01, 2012 1:09 am
- Forum: Template Library
- Topic: Hobby zone champ and micro t-28 templat wanted
- Replies: 4
- Views: 4048
- Fri Aug 31, 2012 8:45 pm
- Forum: Template Library
- Topic: Hobby zone champ and micro t-28 templat wanted
- Replies: 4
- Views: 4048
Re: Hobby zone champ and micro t-28 templat wanted
I thought I had to change the channel order? Is the only other thing I have to do is set it for dsm
in the er9x menu? Sorry if this is a stupid question, I'm just learning.
in the er9x menu? Sorry if this is a stupid question, I'm just learning.
- Fri Aug 31, 2012 4:51 pm
- Forum: Template Library
- Topic: Hobby zone champ and micro t-28 templat wanted
- Replies: 4
- Views: 4048
Hobby zone champ and micro t-28 templat wanted
I just did the dsm mod and installed er9x. I was able to setup my fun cub using one of the templates off this forum but I can't get my champ or t-28 micro properly setup. Does anyone have a template for either that I can download and learn from?
- Thu Aug 30, 2012 11:30 pm
- Forum: Where to buy / Spares / Modules? Selling up?
- Topic: Looking to buy stock flysky module
- Replies: 6
- Views: 7171
Re: Looking to buy stock flysky module
I searched for it but can only find it shipped from China and they say it could take several weeks so I was hoping someone would have one they wanted to get rid of sooner. BTW I live in Rhode Island. Just downloaded er9x and I'm having a heck of a time trying to figure out how to program my existing...
- Thu Aug 30, 2012 7:10 pm
- Forum: Where to buy / Spares / Modules? Selling up?
- Topic: Looking to buy stock flysky module
- Replies: 6
- Views: 7171
Looking to buy stock flysky module
I am looking for the module that comes with the Fs-th9x-b with the antenna attached. I know many people buy the radio and upgrade to frysky so if you have the stock flysky with attached antenna let me know.
I am building a removable dsm module and want to be able to swap from flysky to dsm.
I am building a removable dsm module and want to be able to swap from flysky to dsm.
- Wed Aug 22, 2012 11:12 pm
- Forum: DSM2/DSMX Mods
- Topic: Trying to install dsm into an empty module
- Replies: 4
- Views: 4163
Re: Trying to install dsm into an empty module
I live in rhode island but there were several burnt traces on the board so I was Leary about trying to fix it in case something went wrong and I lost the plane. I was able to get a brand new one from hobbypartz for 75.00 so it is worth the peace of mind to get a different one. Rperkins. Could you te...
- Wed Aug 22, 2012 8:45 pm
- Forum: DSM2/DSMX Mods
- Topic: Trying to install dsm into an empty module
- Replies: 4
- Views: 4163
Trying to install dsm into an empty module
I just fried my turnigy 9x by being stupid and plugging the battery in backwards. I have another one on the way and now I have the old turnigy module. I would like to empty it out and place a 3.3v bec and the dsm module from my hp6dsm inside so I can switch easily between my factory flysky module to...
- Sun Aug 19, 2012 7:48 pm
- Forum: DSM2/DSMX Mods
- Topic: DSM2 work
- Replies: 427
- Views: 307852
Re: DSM2 work
I am about to install the dsm module from a hp6dsm into my turnigy 9x, could someone please explain to me how to install a switch to switch the power back and forth between the dsm and the factory module? I would greatly appreciate it I can't seen to find any info anywhere Thanks, pictures would be ...
- Sat Aug 18, 2012 2:09 am
- Forum: er9x
- Topic: buddy box help
- Replies: 10
- Views: 6736
Re: buddy box help
great, I'll give that a try. I have tried to order another turnigy but they are always out of stock....
- Fri Aug 17, 2012 7:41 pm
- Forum: er9x
- Topic: buddy box help
- Replies: 10
- Views: 6736
Re: buddy box help
thanks for the info, how would I find out if the Dynam outputs PPM?
- Fri Aug 17, 2012 2:01 pm
- Forum: er9x
- Topic: buddy box help
- Replies: 10
- Views: 6736
Re: buddy box help
I can do the mod but I read somewhere that if I upgrade the firmware I do not need to ad the resitor. I guess my question is are the dynam remotes compatible with the turnigy 9x? I do not want to cut my module if it is not compatilble even after I am done. I am new to this so i am not sure if buddy ...
- Thu Aug 16, 2012 4:30 pm
- Forum: er9x
- Topic: buddy box help
- Replies: 10
- Views: 6736
buddy box help
I am new to flying RC and trying to teach my son to fly my Fun Cub and HawkSky. I have the Turnigy 9X with stock software. If I upgrade the software to Er9X would I be able to use the stock HawkSky Remote (4 channel 2.4 ghz dynamm remote with a S-Video training port on the side) as a student box and...