openrcforums

Thank's

Hi I have the following error when downloading with Companion only if I use the option JETI

I tried earlier and the 1563 operates correctly

I have not tried with m64 because I changed all my TX to m128

only you can see the JETI main menu and keys are inoperative, the previous version did not work. Thank you very much.

Hi I loaded the 1855 open9x JETI m128 and the JETI menu does not work, anyone know why this happens. Thank you very much.

Very good Romolo, merry chirstmas to all

Thanks to all

Ok, anyone has sam-ba 2.11 files ?

Yes Rob and sam-ba is ok, i can read and write in sam-ba but not in companion.

Hi ,anyone has a solution?, I can not communicate with the board ersky but samba works perfectly. attached copy of the screen.
Thank you.

Very good job,that you think of a "Timer screen" with both timers and state of keys and flight phases with large numbers?

Thank you

Ok I realize this procedure and read different settings between m64 and m128 fuse settings, this is correct? ================================================================================= Started AVRDUDE C:/companion9x/avrdude.exe -c usbtiny -p m64 -U lfuse:r:-:i -U hfuse:r:-:i -U efuse:r:-:i ===...

Bertrand which is the correct sequence to set fuses in companion9x ?. Thank you

Bertrand Ok but I have to put the command -B 1000 all times to program.

Hi ,what are the correct fuses setting on AVRDUDE for m128 ?
Thank you

gbirkus, perfect !!.
Thank you very much.

Yes i use this solution but the timer stop when P1 is low.Thank's

Hi , I find important to include P1, P2 and P3 as inputs for timer trigger like THR. I use a custom cabinet design (see my other post) with the potentiometers P used as sliders in cabinet side, particularly in P1 as an accelerator for F5J model and P3 adjustment for camber you believe this modificat...

user-defined switch and mix names by model

SkyNorth Hey, great job congratulations. Looking at the diagrams encounter some common errors committed to draw connections, for example in the coordinate file C-0 in ERSKY9x_B20.dsn is better to change the connection on CROSS for T not to give rise to doubts about the "point connection". ...