openrcforums

No problem, it was a good try anyway, not necessary for the moment more an experiment, may have a need for what we have now for something in the future. Thanks again for the try.

Dave

Hi Mike,
The timer works great, activated at 33 seconds, but, I for the life of me could not get it to turn the mix off for any length of time, it's possible I have not made an adjustment in the mix screen correctly, I've tried all sorts of combinations, the switch only switches off for a second.

Is there anything special I need to do/use to operate a momentary switch via the trainer port on the back of the Taranis? All I want is a momentary button in a small project box with a lead going to the trainer port to operate a single servo (on/off) that's all.

Thanks Mike, I will program it tonight after work, will let you know how she goes.

Dave.

Hi Mike, I've tried all different versions of your suggestion, plus a few of my own, close but no cigar. If only there was no limit in the time, 25 seconds is not enough, any idea why? Anyway, I have setup an alarm that will annoy me until I turn it off, it starts after the allotted 33 seconds, it's...

Dean is correct, I have all my telemetry voiced to me on demand using the trainer switch, being a glider flyer, flight time, RX battery voltage and RSSI are important. Lastly, if you use the Frsky GPS with the SPort make sure it is first in line from the receiver, I use one with a battery monitor an...

Just reading older threads and thought you may be interested in the system I've been using, have a look at this URL.. https://hobbyking.com/en_us/wireless-buddy-box-system-8ch-dual-rx-controller.html I have used this with my mode 1 Taranis coupled with a mode 2 Spektrum and it works faultlessly, the...

I've tried setting the duration, but it wont let me set above 20 or 30 seconds. Looked at the glossary on OpenTXU, but it is written in computer speak and needs a little dumbing down, I've been able in the past to get the Taranis to do what I want, this one use per flight switch is stumping me. The ...

João, Thanks for the reply, I'm sitting at the PC with the Taranis plugged in, there is probably a 1 shot switch in the system, but I'm not up on the meanings of a lot of the symbols used in the opentx programming, i need to make a glossary of terms and symbols to keep in my manual. Thanks Again, Dave

Go to this web site and us it to create any phrases you want, some times you will have to type the words phonetically to get the words to be pronounced to your liking. http://www.acapela-group.com/ watch this video on how to use Acapela with Audacity. https://youtu.be/pi_KAbgJ3vE I've created many c...

The only issue I have come across is the eepes need to be installed onto the same firmware as the one they were taken off, I tried this the other day and the radio would not let me install the previous backup because of the newer firmware. If the eepes are in the TX when the firmware is updated the ...

I've been trying my hardest and all I have come up with is a timed switch that switches on for the 33 seconds then switches off for at the most 175 seconds then switches on again for the set 33 seconds again starting the cycle again, it would be Ok if I could set the off time for 10 or more minutes,...

I fly a Radian in an F5J comp for Radians only, the Radian doesn't like full throttle on launch, it will loop out of your hand, this I fixed with 12% down elevator mix at full throttle, works great for sports flying not for F5J. What I want/need is for the elevator mix to turn off a number of second...

Hi All,
I am after one or two of the original 2.4gig V2 modules of the TH9X transmitter, so, anyone out there in OZ who has swapped theirs out for a different module and just have them lying there gathering dust. If you no longer need the V2 module I have a use for a couple.