openrcforums

You don't need a computer. There are standalone USB-PPM interfaces like this one: http://www.hobbyking.com/hobbyking/store/__17165__BT_1_8_Channel_FPV_Joystick.html?strSearch=joystick Why don't they sell that with out the joystick :| Because the "USB" connectors on the device aren't reall...

You don't need a computer. There are standalone USB-PPM interfaces like this one: http://www.hobbyking.com/hobbyking/store/__17165__BT_1_8_Channel_FPV_Joystick.html?strSearch=joystick Why don't they sell that with out the joystick :| http://www.elemodel.com/shopen/html/product_1686.html LOL it cost...

There is no USB interface in the 9x, so you can not connect directly. What people are doing is connecting their joysticks, gamepads etc to a computer and use the computer to convert the digital serial data from the joystick into the signals transmitters can receive via their trainer ports. This cou...

sgofferj wrote:You don't need a computer. There are standalone USB-PPM interfaces like this one: http://www.hobbyking.com/hobbyking/stor ... h=joystick

Why don't they sell that with out the joystick

I have a Turnigy 9XR and a Turnigy 9X and have seen a few videos of people use a usb joystick to fly and it seems to be connected through their Tx. Not sure if it was a 9X or something else. Haven't been very successful in googling so wanted to through in a question here :) Is it possible to connect...

Here is how I have configured my car template, if anyone is interested

gohsthb wrote:Here try this:

CAR01.eepm

-Gohst

Thanks!

It was a short lived test run broke off the left rear tire just ordered some parts. Thanks again!

gohsthb wrote:So you want, with the thr switch off the car will drive forward. And then with it on, you want the car to drive in reverse?

Sent from my LG-P999 using Tapatalk 2

Yes, exactly

I am trying to make a car template for my 1/16 turnigy buggy. I want to have channel 3 as throttle (mode 2) and I don't have the spring on the stick. So what I would like to do is from the bottom and up would be 0-100 and I would like to be able to flick the THR swich and have the throttle stick to ...

*Sigh... seems as my old futaba Fp-t2pb Rx is dead (old 2ch) but the pontimeters on the Tx seem to be ok. Could I .. I know this sounds crazy but could I mix a jack cable from the gun radio to be used with the trainer port on my 9x and just let the 9x hang around my neck and hooked to the old magnum...

manu wrote:Like the the Becker Tx?
With 9X FW?
That would be great.

Almost exactly like that

Was thinking of a Robotic remote with something like this gimbal

jhsa wrote:

mummi wrote:I am thinking about getting the ersky9x board once the new one comes. I was wondering what I could do with the stock board

An Arduino??

hah.. well I was thinking more custom Tx thingy

I am thinking about getting the ersky9x board once the new one comes. I was wondering what I could do with the stock board, what would I need to make a DIY 9x? other than module screen and gimbals? would I need the pcb where the powerbutton and speaker is or could I mix that somehow?

Would the 9x be able to bind to this Rx?

nsf wrote:Don't know the gt3b firmware in detail, but the main benefit is probably the ergonomics of the tx.
Here's a review to the hack. Hope it helps.
http://flyskyrc.blogspot.pt/2012/04/pet ... eview.html

It did, thanks again! you get a star! *

I am not sure what benefits this FW has for cars/boats over 9x? Lets say I would mesh together an ugly Frankensteinesque pistol grip 9x. Would the 9x FW have some downside for a car/boat, are there features on car Tx's that are not in the airplane/heli Tx's and vice versa ? [EDIT] strike out the vic...

nsf wrote:yes it can.
Info here:
http://www.overkillrc.com/gt3b.htm
http://www.rctech.net/forum/radio-elect ... hread.html
http://www.rccrawler.com/forum/electron ... hread.html

Awesome thanks!

I just dug up some old rc nitro buggys and my futaba 2ch pistol grip radio and now I want more! Is there a cheap hackable pistol radio wich is as active as the 9x?

Or should I make a monster out of my old futaba and the guts of a 9x?

ShowMaster wrote:Anything we can use?

http://www.allelectronics.com/make-a-st ... OTS/1.html

SM

Has anyone tried these out?

OK, pot shaft one side, a pin or post on the other side. Maybe the pin/post is out of its location. SM hmm... I think I know what you are talking about .. but not sure I am just about to get home and take it apart again. [EDIT] you where right.. But the post seems to be broken. The walkera pots wor...

Kilrah wrote:I think what he calls the "pin" is the "stick"...

Correct sorry for the wrong terminology.

I have a devo 7 Rx and Tx and would like to bind my 9x to 2 walkera helis. Has any one installed this module?

the problem with the potentiometers is that the 9x uses pots with the 5K Ohms on only about 30 degrees each side from the centre. if the ones from walkera are like that they would probably work.. But if the problem is the pot you could maybe repair it, or at least try.. I think the pot is ok. cause...

I think you might have damaged the potentiometer.. they're not very strong anyway.. what pin are you talking about? I don't think the walkera devo 7 sticks are compatible.. I wish they were because there are no replacements for the 9x's pots.. that's the big problem with this radio.. João I ripped ...

I think you might have damaged the potentiometer.. they're not very strong anyway.. what pin are you talking about? I don't think the walkera devo 7 sticks are compatible.. I wish they were because there are no replacements for the 9x's pots.. that's the big problem with this radio.. João Great.. s...

Really .. no one?

I dropped my 9x just now... and it landed face down on asphalt. The throttle stick is a bit off first off the spring that stiffens the throttle didn't seem to hold it at all (when I went all the way up and let go the pin would just fall back) so I opened it and tightened it. But I noticed that there...

For multicopters, all you have to do is create a new model (turns up as standard 4-channel airplane) and you're done. Nothing more is needed. All the work is done by the multicopter's computer. The only thing you might have to adjust is limits/subtrim/reverse, and set dual rates and/or expo as desi...

janekx wrote:That mean that you can take some template and customise it.
You only tell control board what you want and where fly and board calculate motors and gyros and accel to do this am I right?

Odeslano pomoci Tapatalk, Samsung mobile

I am pretty sure it did NOT mean that...