openrcforums

hy,

I think let us make best from both

At the latest France I miss at page 12 , the Screen menue structrue
the splash start screen
and all 4 or 5 Sub menues
for DR/Expo, Kurves, Phases, Mixers,

Helle

Hy zdenek, fine, very nice to update the manual! for me and the most other not native english speaker its fine! the latest France manual I have auto-translated from France to Englisch and loaded as Word *.DOC file hope its ok, so anyone can change and improve what he wants. Its not fine but readable...

Hy,

and her the aktuell France manual,
automatic translated to English via Goggle
not fine but readable

Helle

Hy,

here the latest Funktion Diagramm
open9x in German

Helle

hy,

yes thats correct,
but why using a curve and the limits (normlay for the servos limit movement)
weiht is a mutiplicator
offset is a addition

But you have to us 3 Variables or fix -100 0 100 in the Programm
and so you have a simple way to get a free Programming 3 way switch

Helle

Hy, we have a 3POS switch and we can use it at mixer, thats fine. It has -100% 0% +100% as standard, its ok But its not possible to set the 3POS at free values Idea: Would it be better to set the 3POS at the Setup 2/12 screen (because its a hardware switch) with a new menu point at Setup 2/12 Screen...

hy,

I don´t not use a linux
and a picture from a camera is to bad i think and have tested.

not possible at win with avrstudio?

Helle

hy,

yes, and the t7ah-2400 has 12ms frametime.
but not with PPM!
They use a seriell protokoll to the 2.4 hf controller
and a fast 8051 derivat with 40MHz

mfg
helle

hy,

oh yes, I will try it!
Have not realised that the companion th9x simulation is in German,
Are the menues realy in German?

Helle

hy,

could someone please help, can´t find it.
Were can I get a complete set of the german screen-pictures of th9x open9x, latest svr (r1692)
Because I am just writing a German manual for open9x

Source is the english, the france and a short german manual at the FPV-Forum from me.

mfg
Helle

Hy,

not enought time, speed to slow?
does anyone check the XDIV XTAL Divide Control Register at the meag64?
does it realy run with 16MHZ intern?

Helle

and/or the trim switches

hy, look at fpv-community.de, forum, Graupner mx12 kanal 2 geht nicht http://fpv-community.de/showthread.php?12583-MX12-und-Flugsimulator-Gas-Kanal-geht-nicht there are the solutions of most or all of the cheap chinease usb Sim dongles most of them dont work or channel 2 doesnt work I know only one ...

Hy, At a Frametime of 22ms you can get max 9 cannels not more! (in one Frame!) 9x2ms=18ms inclusive the impulsseparator 300us Frame separator min twice of max Impuls 2*2ms = 4ms so you have max 9 channels! 18ms +4 ms =22ms this is/was a "Standard" Frametime all FM-receivers work But with m...

Hy zdenek, PPM all output goes to the HF-Modul depending on channels 4,6,8,10, Frametime 22,5ms, Pulseseparator 300us , +/- edge PPM16 Channel 1 to 8 goes out to the HF-Modul and paralell Channel 9 to16 goes out to the DSC jacket, so you can connect there a second HF-Modul and you have really 16 cha...

Hy zdenek, I thnik your englisch manual is the best we have! same details description I am missing Page 28 12 Protokoll PPM PPM16 PPMsim and what happen with the PPM at Power on or Power off PPM to HF-Modul and PPM to DSC jacket output 13 There should be a diagramm of a PPM Signal too explain a Fram...

Hy,
flashed r1670
runs faster! before 9,5ms, now 3,6ms with same eeprom and modell-test
stabil with less jitter
Is this real possible?
seems much better
will test with oszi
Helle

Hy, this is a well known Problem of the most of the cheap chinese Simulator kabel for all kind of TX it will not detect the TX or only the channel 2 will not work, all the same!! Look at forum FPV there are a soltution which will allways work with all TX Search Graupner Kanal2 will not work or searc...

Hy, use a ready splash screen picture *.bmp format open it with irfanview and zoom it activate the draw funktions to change the picture if you want add text as you like Maier Müller Huber... save it as *.bmp thats all you have to do use this picture at companion9x to flash it into the TX together wi...

Hy,

I take Irfanview
load splash, zoom it,
open draw equipment
change or modify a splash
save as BMP
ready

Helle

Hy

companion9x V1.07
open9x r1641 in German

Now download and compilation is ok no error

Thanks

Helle

Hy,

you use thespectrum DX6i as the student TX?
you use the th9y as the master TX?
you use mono 3,5mm jacket for the th9x?
you are shure that at dx6i a PPM signal with 5V level (minimum is 3,6V) is comming out?

then you must see the incomming signal at the display of the TH9x!

Helle

Hy,

which software Version? open9x r????
and upload your EEpromfile here


Helle

Hy,

install companion9x and open9x or er9x and you can do it

Helle

Hy zdenek, latest manuals with the Global Vars looks fine, best manual! thank you very much!! I think: Now, we are at a point that we need a manual with lots of examples and shematics of the helicopter and airplane compareable as in he manuals of Futaba or Graupner explained funktions. Because now t...

hy,

allways the same
each Language will work and compile with no error, expect of german
Companion9x V1.07 open9x r1563 for stock board

I can download en fr it cz se all ok
but not german

compilation server temporary error, tray later

Why?
What can I do?

Helle

hy,

it works with both ISB-Progrmmer 5V on AND TX power on --> OR only TX Power on
Now I use only a 5 Pin socket with no 5V from ISB-Programmer, so only TX Power on
All runs very well

Helle

Hy, I think i/o co-prozessor via I2C is a good solution we can get more analog inputs 4-6 more for funktions modell we can get more digital inputs 6-8 switches for funktions modell we can than use this inputs to the Channels 8-16 for real outputs i/o co-Porzessor can do lots of other things itself, ...

Hy, Poblems with the channel1 have most of the cheap chinease USB dongles it also depending of the signal input interface of this USB dongles, most of this are bit bullshit and of the input signal itself, some will work, some not with PPM 5V, 3V, 0,7V input with positiv or negativ pulses I had same ...

Hy, why do you allways work with no compatible USB Progammer and get problems were you don´t need it. cheap china 5-8€ USB ISP-programmer will work or not depending of the enviroment of the hardware use this one: mysmartUSB light cost 15€ http://www.myAVR.de or http://shop.myavr.de/index.php?sp=arti...