Search found 82 matches

by Wimh
Sat Jan 02, 2021 12:14 pm
Forum: er9x
Topic: Helicopter V911 not binding.
Replies: 5
Views: 511

Re: Helicopter V911 not binding.

Can you set the protocol in that TX/Module (I doubt it...)? V911 works with the old AFHDS , not the newer 2A. You could try one of the multiprotocol modules...
by Wimh
Thu Dec 03, 2020 3:42 pm
Forum: er9x
Topic: er9x development
Replies: 3167
Views: 663175

Re: er9x development

Kotello wrote:
Thu Dec 03, 2020 2:16 pm
... did you try to reflash the transmitter?
I ordered the programmer and will try reflashing my FS-I6 then.
by Wimh
Wed Dec 02, 2020 3:59 pm
Forum: er9x
Topic: er9x development
Replies: 3167
Views: 663175

Re: er9x development

MikeB wrote:
Fri Sep 20, 2019 10:36 pm
What processor is in that transmitter?

Mike
From the above manual it looks like a Cortex M0...
by Wimh
Wed Dec 02, 2020 10:38 am
Forum: er9x
Topic: er9x development
Replies: 3167
Views: 663175

Re: er9x development

Thanks, I found the instructions in the Russian thread you linked and translated them to English with the help of Google. If there are no obvious mistakes, I'll clean it up a bit...
by Wimh
Mon Nov 30, 2020 2:46 pm
Forum: er9x
Topic: er9x development
Replies: 3167
Views: 663175

Re: er9x development

Yes, using an internal RF module, implemented by AFHDS2A. AFHDS is not available yet. The firmware has been working for a long time, I have not looked here for a long time. At the moment, a project is being prepared for 2 transmitters I6 and I6X at once. This project will be published on GITHub. Th...
by Wimh
Thu Apr 02, 2020 11:42 am
Forum: openTx
Topic: AFHDS2A bind two receivers
Replies: 5
Views: 1183

Re: AFHDS2A bind two receivers

Should work if you (can) use Flysky AFHDS2A 1-way protocol, you lose all telemetry though...
by Wimh
Fri Nov 24, 2017 2:44 pm
Forum: Other Radios
Topic: One step closer to my ideal radio...
Replies: 1
Views: 2367

One step closer to my ideal radio...

Hi all..

I ordered one already...

https://www.banggood.com/IRangeX-iRX-IR ... 26058.html?

I would prefer ER(sky)9x instead of Deviation or something similar. Any chance of that?

Wim
by Wimh
Sun Jul 23, 2017 5:40 pm
Forum: Turnigy 9XR PRO radio
Topic: 9xr pro with Irangex 4 in 1
Replies: 8
Views: 5334

Re: 9xr pro with Irangex 4 in 1

Does not work, tried Assan, does not work either. How to check if module gets any power at all? Edit: Easy, open it and discover 2 led... Nothing was making contact. I had to unscrew the print and seat it properly on the contacts.Led now lighting, gave me confidence.Tried Assan first, then FrSky.Bot...
by Wimh
Sat Jul 22, 2017 6:45 pm
Forum: Turnigy 9XR PRO radio
Topic: 9xr pro with Irangex 4 in 1
Replies: 8
Views: 5334

Re: 9xr pro with Irangex 4 in 1

MikeB wrote:
Sat Jul 22, 2017 10:00 am
"FrskyD", the third protocol in the list should work, subType 0.

Mike.
I only have type none and one to seven?
by Wimh
Sat Jul 22, 2017 7:28 am
Forum: Turnigy 9XR PRO radio
Topic: 9xr pro with Irangex 4 in 1
Replies: 8
Views: 5334

Re: 9xr pro with Irangex 4 in 1

What to use for frsky d8 type receiver?Tried frsky subtype none and 3 , not working
by Wimh
Sat Feb 04, 2017 8:50 am
Forum: Orange DSM Telemetry module
Topic: Using in 9XR-PRO
Replies: 84
Views: 36354

Re: Using in 9XR-PRO

i had the same problem with binding, i did the 220 update and set the appropriate options for dsm2/dsmx and 9xr-dsm and i was able to bind using the bind button on the module during power up. now if only i could get the correct response from my throttle.... Would you mind telling us what these appr...
by Wimh
Sun Jan 29, 2017 12:21 pm
Forum: Orange DSM Telemetry module
Topic: Using in 9XR-PRO
Replies: 84
Views: 36354

Re: Using in 9XR-PRO

Then what is the internal module on the Pro? And why no more light on my orange module after the upgrade? Where can I find the correct settings for the orange module in version 220 ?
by Wimh
Sun Jan 29, 2017 11:44 am
Forum: Orange DSM Telemetry module
Topic: Using in 9XR-PRO
Replies: 84
Views: 36354

Re: Using in 9XR-PRO

I updated to version 220 in the hope I could finally bind an orange receiver, but now I no longer have a bind option, neither my trainer switch nor the button on the module activate bind mode( they did before the update???) How do I check if the module gets powered at all? Why do I have to set an "i...
by Wimh
Sun May 29, 2016 8:05 pm
Forum: Orange DSM Telemetry module
Topic: Using in 9XR-PRO
Replies: 84
Views: 36354

Re: Using in 9XR-PRO

no.Same behavior on all of them
by Wimh
Sun May 29, 2016 1:05 pm
Forum: Orange DSM Telemetry module
Topic: Using in 9XR-PRO
Replies: 84
Views: 36354

Re: Using in 9XR-PRO

Tried my 9xr pro dedicated Orange module today in vain. Cannot get it to bind to a new 820 x receiver. Receiver goes in bind mode OK, rapid flashing, when I start Tx in bind mode this changes to slow flashing and then no light. Led on module goes red(flashing) , module beeps 3 times, then 3 more ti...
by Wimh
Sat Jan 30, 2016 8:17 pm
Forum: 3D Printing
Topic: 3D printer
Replies: 29
Views: 8786

Re: 3D printer

HI, I have an idea :idea: for a possible 9x radio 3D Printer project for some one with a 3D Printer. What I was thinking is to make 9x Radio Case, which moves the display screen to the top of the 9x radio and maybe the speaker with the 3 pots to the bottom. Also maybe having the back half of the 9x...
by Wimh
Tue Nov 03, 2015 1:16 pm
Forum: ersky9xr
Topic: Turnigy 9xr Pro + FrSky XJT + D4R-II won't bind
Replies: 40
Views: 14309

Re: Turnigy 9xr Pro + FrSky XJT + D4R-II won't bind

Could it be PXX only? I managed to bind my first D8R-II PLUS receiver to my XJT(D8 mode), but then changed protocol to PXX. It kept working, but I was not able to bind another identical D8R-II PLUS receiver afterwards( no problem with the DHT nor the DHT-U). I will try again soon , switching off PXX...
by Wimh
Tue Sep 29, 2015 9:14 am
Forum: FRSky Horus radio
Topic: T12 Graupner-SJ like Frsky Hourus ?
Replies: 22
Views: 14409

Re: T12 Graupner-SJ like Frsky Hourus ?

It is not dead yet apparently ( China Hobby Expo 2015) Image

Hopefully it has 2 antennas like the FS-I6
by Wimh
Tue Sep 29, 2015 9:12 am
Forum: FRSky Horus radio
Topic: T12 Graupner-SJ like Frsky Hourus ?
Replies: 22
Views: 14409

Re: T12 Graupner-SJ like Frsky Hourus ?

Double...
by Wimh
Fri Sep 25, 2015 2:39 pm
Forum: other
Topic: FS-i6 8 channels patch!
Replies: 15
Views: 12334

Re: FS-i6 8 channels patch!

there seems to be an 8 channel version available...

http://www.rclogger.com/RC-EYE/Spare-Pa ... ystem.html
by Wimh
Mon May 25, 2015 12:57 pm
Forum: Hardware
Topic: Search for Replacement 9x Potentiometers!
Replies: 296
Views: 105042

Re: Search for Replacement 9x Potentiometers!

Available Juli or so, will have price then...
by Wimh
Mon Apr 20, 2015 6:16 pm
Forum: Where to buy / Spares / Modules? Selling up?
Topic: Wanted: SKY9X board
Replies: 4
Views: 3260

Re: Wanted: SKY9X board

I have one I will probably never use...
by Wimh
Thu Nov 20, 2014 6:59 pm
Forum: Turnigy 9XR PRO radio
Topic: FrSky Xjt Cannot binding
Replies: 17
Views: 5129

Re: FrSky Xjt Cannot binding

Have you got the protocol set to PXX and D16? When you then select the BIND option in the menu do BOTH the radio and the XJT beep? Then switch the Rx on while holding the FS button in, binding is almost immediate and the RED led on the Rx flashes quickly. Mike. I have problems too. PXX and D16 or D...
by Wimh
Mon Oct 27, 2014 7:44 pm
Forum: FRSky Horus radio
Topic: T12 Graupner-SJ like Frsky Hourus ?
Replies: 22
Views: 14409

Re: T12 Graupner-SJ like Frsky Hourus ?

What about this one... I don't care much about the colour touchscreen, but it sure looks better than the Horus prototype
Image
by Wimh
Mon Oct 27, 2014 7:44 pm
Forum: FRSky Horus radio
Topic: T12 Graupner-SJ like Frsky Hourus ?
Replies: 22
Views: 14409

Re: T12 Graupner-SJ like Frsky Hourus ?

What about this one... I don't care much about the colour touchscreen, but it sure looks better than the Horus prototype
Image
by Wimh
Sat Oct 11, 2014 11:43 am
Forum: ersky9xr
Topic: 9XR Pro won't connect to computer
Replies: 23
Views: 9615

Re: 9XR Pro won't connect to computer

Thanks, thought I tried that, anyway, it worked now...( I see I was the first to download the latest test version, hehe)this time I flashed it from the SD card, worked correctly
What does the "Jap/Eur/...>>> setting mean?
by Wimh
Sat Oct 11, 2014 11:32 am
Forum: ersky9xr
Topic: ersky9xr firmware
Replies: 10
Views: 4118

Re: ersky9xr firmware

I think he has done that(worked for me too now) but has not burned the new version or installed it with the bootloader, just copied it to the sd card...
by Wimh
Wed Oct 08, 2014 7:41 pm
Forum: ersky9xr
Topic: 9XR Pro won't connect to computer
Replies: 23
Views: 9615

Re: 9XR Pro won't connect to computer

I assume you don't hear the 'USB CONNECTING" sound on the PC when you plug in? You may well have done so, but the first stop is to try another USB cable. It is known that there are cables around, that are used for charging devices, that only have the power and ground connected, no data. Mike. I hea...

Go to advanced search