Search found 21 matches

by n1trog3n
Thu Nov 12, 2015 5:45 pm
Forum: ersky9xr
Topic: Turnigy 9xr Pro + FrSky XJT + D4R-II won't bind
Replies: 40
Views: 7542

Re: Turnigy 9xr Pro + FrSky XJT + D4R-II won't bind

Kilrah wrote:Should be a TPS5401.
Ordered one.
by n1trog3n
Thu Nov 12, 2015 4:58 am
Forum: ersky9xr
Topic: Turnigy 9xr Pro + FrSky XJT + D4R-II won't bind
Replies: 40
Views: 7542

Re: Turnigy 9xr Pro + FrSky XJT + D4R-II won't bind

OK, that means the chip with the hole in is not working, you are getting something like battery voltage not 5V. The only fix is to replace the chip (at least, assuming there are no other problems), although I'm not sure at the moment exactly what the chip is. I don't have the circuit diagram for th...
by n1trog3n
Wed Nov 11, 2015 8:02 pm
Forum: ersky9xr
Topic: Turnigy 9xr Pro + FrSky XJT + D4R-II won't bind
Replies: 40
Views: 7542

Re: Turnigy 9xr Pro + FrSky XJT + D4R-II won't bind

On the back of the XJT are some pin headers, one row of 4 and another of three. Right at the bottom of the case is a diagram showing the connections to them. The three on the right are the SPort connections, labelled -, + and S. Please measure between the - and + pins when the XJT is powered. Take ...
by n1trog3n
Tue Nov 10, 2015 7:55 pm
Forum: ersky9xr
Topic: Turnigy 9xr Pro + FrSky XJT + D4R-II won't bind
Replies: 40
Views: 7542

Re: Turnigy 9xr Pro + FrSky XJT + D4R-II won't bind

Sorry, Mike. I did not get where I have to measure voltage. Can you show where on picture please.
by n1trog3n
Tue Nov 10, 2015 4:18 am
Forum: ersky9xr
Topic: Turnigy 9xr Pro + FrSky XJT + D4R-II won't bind
Replies: 40
Views: 7542

Re: Turnigy 9xr Pro + FrSky XJT + D4R-II won't bind

MikeB wrote:Is that a hole burnt in the chip?

Mike.
Looks like you're right. Seems like a small hole....
by n1trog3n
Sun Nov 08, 2015 3:08 pm
Forum: ersky9xr
Topic: Turnigy 9xr Pro + FrSky XJT + D4R-II won't bind
Replies: 40
Views: 7542

Re: Turnigy 9xr Pro + FrSky XJT + D4R-II won't bind

Look what I've found.
Image
Image
any thoughts is that possible to fix it?
by n1trog3n
Sat Nov 07, 2015 8:17 pm
Forum: ersky9xr
Topic: Turnigy 9xr Pro + FrSky XJT + D4R-II won't bind
Replies: 40
Views: 7542

Re: Turnigy 9xr Pro + FrSky XJT + D4R-II won't bind

The connection of all pins is okay.
Looks like it's really broken..
by n1trog3n
Sat Nov 07, 2015 7:29 pm
Forum: ersky9xr
Topic: Turnigy 9xr Pro + FrSky XJT + D4R-II won't bind
Replies: 40
Views: 7542

Re: Turnigy 9xr Pro + FrSky XJT + D4R-II won't bind

Yes, with DJT everything works super fine.

XJT binds when I set switches in D mode (1 is on, 2 is off), then when i power everything again Rx flashes with red light as there is no signal between rx and tx.

Summed up under the above is my XJT broken and there is no chance to fix it? :(
by n1trog3n
Sat Nov 07, 2015 5:44 pm
Forum: ersky9xr
Topic: Turnigy 9xr Pro + FrSky XJT + D4R-II won't bind
Replies: 40
Views: 7542

Re: Turnigy 9xr Pro + FrSky XJT + D4R-II won't bind

The non-Europe firmware is here: http://www.frsky-rc.com/download/view.php?sort=&down=135&file=Firmware-XJT . Download this, then put it in the FIRMWARE directory on the SD card. Remove the XJT from the radio. Then start the radio holding the horizontal trims APART. The main problem you will have i...
by n1trog3n
Fri Nov 06, 2015 6:09 pm
Forum: ersky9xr
Topic: Turnigy 9xr Pro + FrSky XJT + D4R-II won't bind
Replies: 40
Views: 7542

Re: Turnigy 9xr Pro + FrSky XJT + D4R-II won't bind

Check the following please. Change the protocol to PPM, then check if the output is set to "full drive" or "open drain". If it is "open drain", change it to "full drive", then go back to PXX and try the XJT again. The 9XR-PRO includes a facility to upgrade the firmware on the XJT. This is "maintena...
by n1trog3n
Tue Nov 03, 2015 2:59 pm
Forum: ersky9xr
Topic: Turnigy 9xr Pro + FrSky XJT + D4R-II won't bind
Replies: 40
Views: 7542

Re: Turnigy 9xr Pro + FrSky XJT + D4R-II won't bind

Your first post suggests the XJT is binding to the D4R-II by pressing the button on the XJT, the Rx should flash the red LED when it binds. From all the other information, it sounds to me that thre is a problem in the XJT with the PPM/PXX signal not getting through. If a DJT in the same radio works...
by n1trog3n
Mon Nov 02, 2015 7:14 pm
Forum: ersky9xr
Topic: Turnigy 9xr Pro + FrSky XJT + D4R-II won't bind
Replies: 40
Views: 7542

Re: Turnigy 9xr Pro + FrSky XJT + D4R-II won't bind

And again do not work even with v8fr-ii
by n1trog3n
Mon Nov 02, 2015 1:04 pm
Forum: ersky9xr
Topic: Turnigy 9xr Pro + FrSky XJT + D4R-II won't bind
Replies: 40
Views: 7542

Re: Turnigy 9xr Pro + FrSky XJT + D4R-II won't bind

Do you have any other receivers you can try binding with the XJT? Mike. Yes. I have tried to bind it with x8r and got the same result. Dip switches on XJT were off, I pressed the f/s button, turned on the Turnigy. Then I pressed f/s button on the x8r and lights started to blink as they were bound. ...
by n1trog3n
Mon Nov 02, 2015 11:37 am
Forum: ersky9xr
Topic: Turnigy 9xr Pro + FrSky XJT + D4R-II won't bind
Replies: 40
Views: 7542

Re: Turnigy 9xr Pro + FrSky XJT + D4R-II won't bind

It is possible your friend updated the firmware on the XJT to the EU version, can you ask them? When did they give you the radio? It is possible to revert the firmware on the XJT. What revision number and date is on the Version menu? Mike. No, He didn't update the firmware on XJT. I've got my Turni...
by n1trog3n
Sun Nov 01, 2015 7:10 pm
Forum: ersky9xr
Topic: Turnigy 9xr Pro + FrSky XJT + D4R-II won't bind
Replies: 40
Views: 7542

Re: Turnigy 9xr Pro + FrSky XJT + D4R-II won't bind

With the 'PRO and a XJT, you don't need to set the switches on the XJT. Set the protocol to PXX, and for the D4R-II, choose D8 rather than D16. Switch the receiver on in 'bind' mode, then select the BIND option just down from the D16/D8 option on the menu. The question is, when was the XJT purchase...
by n1trog3n
Sun Nov 01, 2015 6:04 pm
Forum: ersky9xr
Topic: Turnigy 9xr Pro + FrSky XJT + D4R-II won't bind
Replies: 40
Views: 7542

Re: Turnigy 9xr Pro + FrSky XJT + D4R-II won't bind

I dont know when it was purchased. The date on the case of XJT says 14/05/08.
by n1trog3n
Sun Nov 01, 2015 6:02 pm
Forum: ersky9xr
Topic: Turnigy 9xr Pro + FrSky XJT + D4R-II won't bind
Replies: 40
Views: 7542

Re: Turnigy 9xr Pro + FrSky XJT + D4R-II won't bind

By the way. How I can bind xjt and x8r? Step by step, please. I'll really appreciate your help.
Im asking cause it wont bind too.
I set PXX, 16ch. Then i select bind mode from the menu and it starts to beep.
Then i am just trying to power x8r with f/s button pressed and nothing happens
by n1trog3n
Sun Nov 01, 2015 4:35 pm
Forum: ersky9xr
Topic: Turnigy 9xr Pro + FrSky XJT + D4R-II won't bind
Replies: 40
Views: 7542

Re: Turnigy 9xr Pro + FrSky XJT + D4R-II won't bind

My friend gave it to me for free. The date on the Tx is 14/05/08.
Tried to bind d4r-ii without a jumper and nothing have changed.
by n1trog3n
Sat Oct 31, 2015 5:28 pm
Forum: ersky9xr
Topic: Turnigy 9xr Pro + FrSky XJT + D4R-II won't bind
Replies: 40
Views: 7542

Turnigy 9xr Pro + FrSky XJT + D4R-II won't bind

Greetings everyone! Guys can somebody help me to solve my problem please? I have Turnigy 9xr Pro + FrSky XJT + D4R-II and they won't bind! The switches on XJT module are 1-ON, 2-OFF(D-mode). I follow these steps: 1. Turn on the D4R-II receiver (jumper between ch 3-4) by powering ch1 (holding f\s but...
by n1trog3n
Fri Aug 21, 2015 10:29 am
Forum: Sound Pack Library
Topic: Russian soundpack
Replies: 1
Views: 2851

Re: Russian soundpack

Hi. Do you have sound list in .doc or .xls?

Go to advanced search