openrcforums

Hello. Before I did the upgrade mod I had the transmitter shut down on me on a moist day, was able to get it back working again and didn't have anymore issues, but after I did the taranis gimbal upgrade I don't get any readings from the sticks and transmitter goes into boot loops. Any ideas? Sent fr...

Does this work with the orange RX module that was release exclusively for the 9xr-pro?

Sent from my LG-H811 using Tapatalk

That worked, thanks Mike!

Sent from my LG-H811 using Tapatalk

And the RX pin if you want telemetry


Sent from my iPad using Tapatalk

What firmware are you using, and what revision. If you are on ersky9x, please flash the latest test version from here: http://openrcforums.com/forum/viewtopic.php?f=7&t=4676#p65894 (ersky9xProvR219j.zip). There has been a possible problem with an earlier test version on the 'PRO where the PXX s...

Please help!

Sent from my LG-H811 using Tapatalk

OK, I am getting telemetry but no servo controls. What the heck is going on? I'm in D16 mode, PXX. But! If I switch to PPM I have full control of the plane but no telemetry.

Sent from my LG-H811 using Tapatalk

I'm gonna try that.

Sent from my LG-H811 using Tapatalk

No, I'm using the button, what position should the switch be in? Both down?

Sent from my LG-H811 using Tapatalk

Yes it binds in pxx

Sent from my LG-H811 using Tapatalk

It's not, I put both switches down and picked D16 in the menu. The RX? I bound it without any jumpers isn't that D16?

Sent from my LG-H811 using Tapatalk

Hello,

The XJT and X6R are bound, but I am not getting any servo movement with pxx, if I switch to ppm the servos will move. What's going on?

Sent from my LG-H811 using Tapatalk

Just solder on some servo leads for ppm, voltage in, and ground

Sent from my LG-H811 using Tapatalk

Buy a Devo 7e and load up deviation flys the Sport Cub S perfect that's what I use

Sent from my LG-H811 using Tapatalk

Interested in this, where do you wire the telemetry radio to on the 9xr-pro?

Sent from my LG-H811 using Tapatalk

agrestic wrote:Solved! The 3 Wire cable of the pot was not connected propperly. Found a video with the same problem on youtube, and this solution in the comments

Link please

Sent from my LG-H811 using Tapatalk

Flashed the latest test for the 9xr-pro, screen becomes scrambled on boot up and radio unresponsive. Upgraded from the first test release from the other day. Reverted to r217 and all is well.