openrcforums

Hello, Today, I finished my project. After killing my Orange Transmittermodule, I had the perfect case for my CT14F Module. Connector to the Transmitter is a Female Servo Connector, fixed by hotglue. The Connectors on the bottom of the CT14F Module are removed, so it also fits into the module. The s...

Great Idea, but:

Just to add an reminder:

ALWAYS CALIBRATE THE STIKS AND POTS IF YOU CHANGED, ADDED OR MODIFIED ONE OF THEM



kind regards,

rob

Hello, you are absolutely right with that. I added a small PCB with extra Voltage regulators. Now I can Change the transmitter module without opening the TX. I use a 3 pole connector and use the 3 upper pins of the transmitterconnector pins. I made a small video: [BBvideo 425,350]http://www.youtube....

Hello, little Update, it works very well. Yellow Wire on the trainer Port connected to the PPM Signal inside the 9X Brown to the ground. And 3.3V from the power regulator inside the 9X to the 3.3V Pin as shown in the picture above. Programm Changes in the model file also as written above. Many thank...

Hello,
who needs that module?
Its great, works fine. I am so happy.

Here you can get it for the half price:
Buddy Code DSM2 DSMX Orange Module for only 18$




But be quick, offer last only 2 weeks.

Best wishes

Hi and thank you for your help.
Seems you are right.
The only connected Pin of 10-Pin-Connector is that wich u marked with 3.3V and the GND.
Also on the 6-Pin-Connector is only the GND connected to the big Areas on the PCB (i think thats the GND).
So i will test that at next.

I will post the result.

i wanted to connect the 5 Volts at the Module Pinout for the original Module, with an switch between to choose one Transmitter Module. I Think that will not overload the regulator, am I right? Sorry, I inspected the Corona Module for any Information on it. There are no markers for any Voltage. I onl...

Hello, as promised, here are the pictures of the opened module. I think, the only problem is to find the power connection. At the manual i see an operating voltage of 5 Volts. Where to find that at the 9X is clear. But where to connect that at the module. I think, the brown cable is connected to Gro...

Hi there,
yesterday i became my module.

But how to wire that to my 9X ?
At the trainer cable, there is only Ground and PPM wired.
Where to find the Plus connector on the Transmitter module CT14F ?

later, i also will post some fotos of the module.

Thanks for your answer,
i ordered it.
I will post my results, when i got it, and when i installed the module.
But delivery time can be 4 weeks.

Kind regards

Robert

Hello, its my first post here, because i cant find any Information at other forums. Does anyone know, how to install the Corona CT14F , 14 Channel Transmitter into the 9X ? I know, that is not fitting into the Transmitter Slot of the 9X, but i have an old one, that i can use. I flashed my 9X with th...