About the spray, wouldn't contact spray short the contacts of the board?
What else could I use on the board?
By the way the unit works fine for now.
Search found 162 matches
- Wed Dec 17, 2014 12:32 pm
- Forum: General help (FrSky Taranis radio)
- Topic: TARANIS water damage
- Replies: 10
- Views: 6833
- Mon Dec 08, 2014 7:24 pm
- Forum: General help (FrSky Taranis radio)
- Topic: TARANIS water damage
- Replies: 10
- Views: 6833
Re: TARANIS water damage
Update:
trying to de-solder the faulty switch and when applying heat with the soldering iron, the water from inside the switch evaporated and the switch works!
going to heat treat all the rest of the switches...
Thanks for your help...
trying to de-solder the faulty switch and when applying heat with the soldering iron, the water from inside the switch evaporated and the switch works!
going to heat treat all the rest of the switches...
Thanks for your help...
- Mon Dec 08, 2014 4:09 pm
- Forum: General help (FrSky Taranis radio)
- Topic: TARANIS water damage
- Replies: 10
- Views: 6833
Re: TARANIS water damage
I will give it a try and see what happens. The board should't have been damaged because the water was clean rain water...
- Mon Dec 08, 2014 3:16 pm
- Forum: General help (FrSky Taranis radio)
- Topic: TARANIS water damage
- Replies: 10
- Views: 6833
TARANIS water damage
Hi, Need some help here... My Taranis (Amodel) was left overnight on heavy rain turned ON!!! dont ask how!! Any way after dissembly and drying the unit i got it working again except switches A, B and D. The switches themselves work as the should but they aren't recognized. Switch A works any now and...
- Sun Jun 01, 2014 7:49 pm
- Forum: FrSky Taranis radio
- Topic: Lithium battery with on board charger
- Replies: 3
- Views: 3551
Re: Lithium battery with on board charger
Ok. Thanks for the input.
I will probably let it go....
I will probably let it go....
- Sat May 31, 2014 4:05 pm
- Forum: FrSky Taranis radio
- Topic: Lithium battery with on board charger
- Replies: 3
- Views: 3551
Lithium battery with on board charger
Hi. I am thinking for quite some time a solution to load my taranis with lipo-life li-ion or whatever large capacity battery but i also want to charg it without removing it from the radio. i found these boards http://www.ebay.com/itm/131188467386?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l264...
- Sat May 31, 2014 11:53 am
- Forum: FrSky Taranis radio
- Topic: Taranis power and charging?
- Replies: 73
- Views: 44317
Re: Taranis power and charging?
Any thoughts for on board lipo charger-balancer? I am sure I've seen some single cell chargers. Any one done something similar. It is a good thing to need only 12 or 5v to charge and balance without removing the battery. Something like this for each cell powered from a common 5v source... http://www...
- Sat May 03, 2014 11:03 am
- Forum: openTx for FrSky radios
- Topic: Trim as channel input?
- Replies: 2
- Views: 2934
Re: Trim as channel input?
Got it.
Thanks
Thanks
- Fri May 02, 2014 6:54 pm
- Forum: openTx for FrSky radios
- Topic: Trim as channel input?
- Replies: 2
- Views: 2934
Trim as channel input?
Hi.
I am flying multicopter a with my taranis and the trims are useless. Is there any way I can use the trims as an input to control channels?
Thanks
I am flying multicopter a with my taranis and the trims are useless. Is there any way I can use the trims as an input to control channels?
Thanks
- Mon Dec 23, 2013 9:22 am
- Forum: General RC Electronic Projects and Discussion
- Topic: Analog input for X8R
- Replies: 68
- Views: 45306
Re: Analog input for X8R
Any updates on this?
I am using it with good results except some "telemetry lost" warnings every now and then...
I am using it with good results except some "telemetry lost" warnings every now and then...
- Sun Oct 27, 2013 7:57 pm
- Forum: General RC Electronic Projects and Discussion
- Topic: Analog input for X8R
- Replies: 68
- Views: 45306
Re: Analog input for X8R
A Chinese one from ebay. The one with the square, printer like, USB plug
- Sun Oct 27, 2013 6:43 pm
- Forum: General RC Electronic Projects and Discussion
- Topic: Analog input for X8R
- Replies: 68
- Views: 45306
Re: Analog input for X8R
I have on order a new ftdi breakout board. It might be it, although it doesnt explain why it worked with the old versions...jhsa wrote:I'm still thinking about what the problem could have been
João
- Sun Oct 27, 2013 6:27 pm
- Forum: General RC Electronic Projects and Discussion
- Topic: Analog input for X8R
- Replies: 68
- Views: 45306
Re: Analog input for X8R
Job done! now i have voltage on A2. i used one of the voltage dividers that i had on my other frsky receivers, wrapped with the promini and taped on the rx. Small package and gets the job done. Now what about a current sensor to go with this? Thank you Mike and João for your help on this, I almost l...
- Sun Oct 27, 2013 3:24 pm
- Forum: General RC Electronic Projects and Discussion
- Topic: Analog input for X8R
- Replies: 68
- Views: 45306
Re: Analog input for X8R
If so you can try to program the sketch with the usbasp making sure you connect to the right pins, select the right port for it, and then press "Shift" on your keyboard at the same time you click the "upload" button. That will upload the code using a programmer. I use that a lot...
- Sun Oct 27, 2013 1:07 pm
- Forum: General RC Electronic Projects and Discussion
- Topic: Analog input for X8R
- Replies: 68
- Views: 45306
Re: Analog input for X8R
Thanks. I will give it a try later this evening and let you know how it goes...
- Sun Oct 27, 2013 12:54 pm
- Forum: General RC Electronic Projects and Discussion
- Topic: Analog input for X8R
- Replies: 68
- Views: 45306
Re: Analog input for X8R
That's interesting! Are the ISP pins available on the pro mini or I have to solder on the chip?
- Sun Oct 27, 2013 12:46 pm
- Forum: General RC Electronic Projects and Discussion
- Topic: Analog input for X8R
- Replies: 68
- Views: 45306
Re: Analog input for X8R
Yes. Confirmed because I can load code with older versions.jhsa wrote:that is strange.. it looks like it might be something with the FTDI then.. Did you select the correct port for the FTDI?
Sorry if this was already mentioned..
João
Any way to change the .ino to .pde?
- Sun Oct 27, 2013 12:38 pm
- Forum: General RC Electronic Projects and Discussion
- Topic: Analog input for X8R
- Replies: 68
- Views: 45306
Re: Analog input for X8R
did try another promini with same results, installed and uninstalled every version above and below V1, all the oo2x versions work all v1 versions don't. I used duemilanove and it worked, i used nano and also worked. I used duemilenove as ftdi and didnt work! Any way i loaded the code to a nano with ...
- Sun Oct 27, 2013 12:10 pm
- Forum: General RC Electronic Projects and Discussion
- Topic: Analog input for X8R
- Replies: 68
- Views: 45306
Re: Analog input for X8R
i can send you my promini to flash it because im getting crazy with it...
- Sun Oct 27, 2013 10:14 am
- Forum: General RC Electronic Projects and Discussion
- Topic: Analog input for X8R
- Replies: 68
- Views: 45306
Re: Analog input for X8R
I cant figure it out. the error is about the communication of the pc with the arduino. Why the asduino 0022 works and arduino 1.0.5 doesn't? Also tried with a different pc, same results. ftdi and promini works since i can upload code with the old ide right? The net is full with people having the sam...
- Sun Oct 27, 2013 9:52 am
- Forum: General RC Electronic Projects and Discussion
- Topic: Analog input for X8R
- Replies: 68
- Views: 45306
- Sun Oct 27, 2013 9:33 am
- Forum: General RC Electronic Projects and Discussion
- Topic: Analog input for X8R
- Replies: 68
- Views: 45306
Re: Analog input for X8R
Changing the .ino to .pde doesn't compile on old ide...ReSt wrote:You may also try to rename .ino file to .pde
Reinhard
- Sun Oct 27, 2013 9:26 am
- Forum: General RC Electronic Projects and Discussion
- Topic: Analog input for X8R
- Replies: 68
- Views: 45306
Re: Analog input for X8R
Yes every thing connected fine. that's why it loads code using the old 0022 ide...jhsa wrote:Did you select the right board? are you using a FTDI adapter? Is this adapter the right way round? with some arduino clones ordered from China, the FTDI connections are inverted. Please check the connections..
João
- Sun Oct 27, 2013 8:39 am
- Forum: General RC Electronic Projects and Discussion
- Topic: Analog input for X8R
- Replies: 68
- Views: 45306
Re: Analog input for X8R
Hi. I sat down to make a arduino promini telemetry adapter as described here but having some hard time with the arduino ide. On arduino 0022 loaded on my pc for ages ( back when i was building multi wii) it uploads some test codes without problem. the new version of arduino ide, (using same port and...
- Sun Oct 06, 2013 7:40 am
- Forum: General help (FrSky Taranis radio)
- Topic: Count down glitch on 10 seconds.
- Replies: 6
- Views: 4833
Re: Count down glitch on 10 seconds.
Didn't know it was intended. Coming from er9x I was expecting 10-9-8...
I will delete the file.
Thanks.
I will delete the file.
Thanks.
- Sat Oct 05, 2013 8:23 pm
- Forum: General help (FrSky Taranis radio)
- Topic: Count down glitch on 10 seconds.
- Replies: 6
- Views: 4833
Re: Count down glitch on 10 seconds.
After "10 seconds" is announced it keeps repeating the 10 seconds message 10 times...
- Sat Oct 05, 2013 8:11 pm
- Forum: General help (FrSky Taranis radio)
- Topic: Count down glitch on 10 seconds.
- Replies: 6
- Views: 4833
Count down glitch on 10 seconds.
Hi.
I know it's been reported but any one have a fix for the problem on countdown after the 10 seconds?
I know it's been reported but any one have a fix for the problem on countdown after the 10 seconds?
- Sat Oct 05, 2013 8:05 pm
- Forum: General help (FrSky Taranis radio)
- Topic: XR8 rx telemetary sensors
- Replies: 296
- Views: 176678
Re: XR8 rx telemetary sensors
Any mod to the x8 Rx to get the A1 available for external voltage? ( disconnect from the Vin of the receiver)
- Mon Jul 08, 2013 7:40 am
- Forum: er9x
- Topic: Audio (voice) - Stock 9X PCB
- Replies: 4092
- Views: 1625995
Re: Audio (voice) - Stock 9X PCB
Speaking of Taranis, any body knows if and when it is going to be available to Europe?
- Mon Jun 03, 2013 4:40 pm
- Forum: er9x
- Topic: Audio (voice) - Stock 9X PCB
- Replies: 4092
- Views: 1625995
Re: Audio (voice) - Stock 9X PCB
I see mike beat me to it and his description covers all 5 positions...