openrcforums

Here is a pic of the S033g.(RED ONE)
And the double horse.9(GREEN ONE)
Tom

Here is the addy to the heli.

http://www.bananahobby.com/1999.html
http://www.xheli.com/56h-s033g-heli-yellow.html

Will try to get some pic of the contorl board.
Thanks for the help
Tom

Ok I have these>>
Syma S033G
Double Horse 9053
Can I do the mod so I can use my Flysky th9?
I have done the dsm mod.
What rx would I need to do this with?

Thanks
Tom

Ok doing the dsm mode.Does this look right?
Also where does the ppm wire with the diode install go on the tx?
Thanks
Tom

gotcha

pmackenzie wrote:If you have done no other mods to the radio just use the "vanilla" ER9X.
Can't comment on the latest or stable, I am using a very old one myself right now with some small changes to it.

VANILLA

Hiya guys, I have asked this :?: but no one has gave me a answer yet so here it goes again.(SORRY) I am doing the HP DSM module mod and need to know what FW do I use in the r708 file. I was told to upgrade to the r708 but I don't no what one to use. :oops: Do I use the Latest Binaries or the Stable ...

deadaim57 wrote:

erazz wrote:If you can then update to r708.
Though the DSM2 is much the same we did have a change in the eeprom structure.

Ok I found r708 but I don't no what one to use so that I can use my Flysky for airplanes and heli's.Can someone help?
Thanks
Tom

Repost..

erazz wrote:If you can then update to r708.
Though the DSM2 is much the same we did have a change in the eeprom structure.

Ok I found r708 but I don't no what one to use so that I can use my Flysky for airplanes and heli's.Can someone help?
Thanks
Tom

I don't no what it looks like,there is no way to pull the wire from the rubber antenna part that sticks up.Or do I need to just measure from the bend up to the tip?
Tom

For short range I would not worry about the handle, but for long range I would follow JR/Spektrum's lead and get the antenna up and away from it. Here is my LP module that I use indoors. No problems with range in the gym. Well I could remove the handle,would that take care of it? Most of the time I...

Got the antenna mod done and everything is working fine.Just one question,will the metal handle interfear with the range?
Now I just have to wait for the UBEC to come in.

Thanks guys for all the help
Tom

just a bad weekend/week ... need a beer. :) :o Don't have a beer but here>> :D Well not even popcorn in the smilies over there,WE NEED SOME MORE SMILIES!! I think I will just wait until my UBEC comes in,it looks easer then the regulator. Been thinking about the antenna thingy. How about if I remove...

...I'm just confused by the references to using a UBEC over the regulator that is more than likely present in the donor radios. It's free, smaller and comes with the donor. I'll remove the reference so it won't confuse people. simple solution, not so simple to understand. go figure. O NO,please don...

Ok now I am really lost here.Just what do I need for this mod?
Tom

:evil: Ok what about this on the antenna.My FlySky has the antenna mounted on the top of the tx,not on the module.Don't see anyway to mount another antenna. Can both antenna wire's be pushed up into the same antenna on top of the tx?Or would they interfear with each other because they are touching a...

Thanks,thats a big help.I didn't no what was +,- or the 3.3v side.
Tom

Is there a pic somewhere on how to install the regulator?
Or is this it? And just use the regulator instead of the UBEC.

Tom

ic

Ok I found it on my board.
Might have more question's later.
Thanks
Tom

Is this what u talking about?I see nothing on my DX4e.
Tom

Well I got one ordered from HK,been a week now and my order hasn't even been printed in the warehouse.Would like to order one from the usa and get it sooner.What would the regulator look like?
Did you see my other post about soldering the antenna wire's together?
Thanks for the help
Tom

Would this UBEC work for the mod?
http://parkrcmodels.com/product_info.ph ... cts_id=556

Thanks
Tom

But I have to have the module and the dxm to fly airplanes and heli's right?
Can the antenna wire from the dsm be solder into the tx antenna wire to make only one antenna? Sorry I am lost here.
Just wondering.
Tom

Maybe this is what is confusing me.
I have removed the old module and placed the DSM antenna in place of the stock radio antenna.

So I was thinking I could use 1 antenna.

Thanks
Tom

Thanks for the help.Here is my FW that is installed now.
trunk>r646
version>V1.5189
08-12-2001
Why does the instruction say that you can install a switch and use one antenna?Unless I misunderstood that part.

Tom

Ok a few question I don't understand about the High Power DS4e mod. 1>It is ok to cut the other pin's off? 2>I understand about the ring on the diode,what about the resistor ring.Does it matter what way the resistor go's? 3>About the antenna.Do I use both antenna's?If not how do I fix and install a ...

Ok think I found one laying around here. It has yellow,violet,red,gold rings my book says it 4.7k,is this the right color's?
Its for the DSM HP module upgrade.
Tom

Hiya,could someone give me a site to where I can get the 4k7 resistor from ? I checked radio shack and fry's but can't find.
Thanks
Tom

Forgot to ask,is there a certain FW version that is need?
I have
version V1.5189
trunk-r646

Tom