Search found 3260 matches
- Tue Mar 22, 2016 3:59 am
- Forum: The Pickled Gnu (The Pub)
- Topic: any actual difference between these two antenna
- Replies: 10
- Views: 13954
Re: any actual difference between these two antenna
The point is that a Tx antenna is designed to get clear of the module and other stuff that affects the radiation pattern. The difference is mechanical, not electrical. The 9XR internal antenna works well, but it's inside a plastic handle specifically designed to keep it away from the works. If you ...
- Tue Mar 22, 2016 3:52 am
- Forum: The Pickled Gnu (The Pub)
- Topic: any actual difference between these two antenna
- Replies: 10
- Views: 13954
Re: any actual difference between these two antenna
Bob195558:
Thx for the link, very interesting videos.
Thx for the link, very interesting videos.
- Mon Mar 21, 2016 9:27 pm
- Forum: Hardware
- Topic: wireless relay
- Replies: 13
- Views: 12940
Re: wireless relay
if as I described using the cppm as input on the 2nd Tx on one ch, and receive at the 2nd rx in one ch by cppm then use a cppm converter to multichannel ppm, could that work? or the 2n tx has to be able to receive cppm AND trsansmit cppm? I know there is something funny about this wireless relay thi...
- Mon Mar 21, 2016 5:24 pm
- Forum: Hardware
- Topic: wireless relay
- Replies: 13
- Views: 12940
Re: wireless relay
kilrah:
so wired ppm should work if the the distance is within reason (say < 20 some ft).
while wireless may have significant lag? but using a SBUS can decrease the lag?
did not know sBus has higher transmission rate.![Wink ;)](./images/smilies/icon_e_wink.gif)
so wired ppm should work if the the distance is within reason (say < 20 some ft).
while wireless may have significant lag? but using a SBUS can decrease the lag?
did not know sBus has higher transmission rate.
![Wink ;)](./images/smilies/icon_e_wink.gif)
- Mon Mar 21, 2016 5:15 pm
- Forum: The Pickled Gnu (The Pub)
- Topic: any actual difference between these two antenna
- Replies: 10
- Views: 13954
Re: any actual difference between these two antenna
Is there a difference of a Tx antenna and rx antenna? (for a dipole, circular is a different story) Any realistic difference as for the antenna is inside the box or outside the box? As far as I know, all the antenna has a plastic outer shell around just for protection except for some rx antenna. Isn...
- Mon Mar 21, 2016 5:13 pm
- Forum: The Pickled Gnu (The Pub)
- Topic: any actual difference between these two antenna
- Replies: 10
- Views: 13954
Re: any actual difference between these two antenna
deleted, duplicate post
- Sun Feb 28, 2016 9:26 pm
- Forum: Hardware
- Topic: wireless relay
- Replies: 13
- Views: 12940
wireless relay
I am asking some inputs to build a wireless relay for 2.4 GHz radio transmission. The idea is to control the model inside building/car/obstructed area but pipe the radio signal to a relay outside the obstructed area within a short distance to fly the model. The idea is to use a XJT(or any module tha...
- Sun Feb 28, 2016 4:39 pm
- Forum: erskyTx (was ersky9x)
- Topic: Adding MAVLINK support
- Replies: 596
- Views: 640057
Re: Adding MAVLINK support
Indeed.
This type of function is what makes er9x so great.
This type of function is what makes er9x so great.
- Thu Feb 25, 2016 11:00 pm
- Forum: ersky9xr
- Topic: Format GPS coordinates
- Replies: 4
- Views: 5408
Re: Format GPS coordinates
GhostSharp:
There are two GPS format can be selected.
Under 'Radiosetup" - "general" 2nd page. YOu can change dd.dddddd or DDmm.mmmm. The DDmm.mmmm is equivalent to Google earth setting: Degree, decimal minutes.
There are two GPS format can be selected.
Under 'Radiosetup" - "general" 2nd page. YOu can change dd.dddddd or DDmm.mmmm. The DDmm.mmmm is equivalent to Google earth setting: Degree, decimal minutes.
- Tue Feb 23, 2016 11:32 pm
- Forum: erskyTx (was ersky9x)
- Topic: Adding MAVLINK support
- Replies: 596
- Views: 640057
Re: Adding MAVLINK support
:lol: :lol: That is great video! :lol: :lol: Yes, we can either set/store home GPS location of the model at the time of taking off in the Tx. Then we can use this even without MP when flying. Or may be getting this info from APM (which will require MP in the beginning)? The DtH, Alt and Galt is alre...
- Tue Feb 23, 2016 6:57 am
- Forum: erskyTx (was ersky9x)
- Topic: Adding MAVLINK support
- Replies: 596
- Views: 640057
Re: Adding MAVLINK support
this may be worth tinkering around when the main functions are finished. At this time we have mavlink data via FrSky telemetry already. Which means we know exactly the home coordinates and the model's real time coordinates. the current mavlink screen has a center graph showing the heading. How diffi...
- Sun Feb 21, 2016 8:16 pm
- Forum: erskyTx (was ersky9x)
- Topic: Adding MAVLINK support
- Replies: 596
- Views: 640057
Re: Adding MAVLINK support
See we've been needing Mavlink for a long time now. [emoji1] Yes! And the same here. Found several things with APM that I never even knew existed - like the 'Drift' mode for starters! Of course that means I will now get lazy when flying, as rudder will be taken care of! lol! read the last paragraph...
- Sun Feb 21, 2016 1:05 am
- Forum: erskyTx (was ersky9x)
- Topic: Adding MAVLINK support
- Replies: 596
- Views: 640057
Re: Adding MAVLINK support
Mike:
Thank YOU for making this function possible!
Actually, while setting up this test in the past couple days I solved a few issues I was trying to figure out to run MP, Minim and FPV backup and recording on the laptop all at the same time for my Joystick panel.![Wink ;)](./images/smilies/icon_e_wink.gif)
Thank YOU for making this function possible!
Actually, while setting up this test in the past couple days I solved a few issues I was trying to figure out to run MP, Minim and FPV backup and recording on the laptop all at the same time for my Joystick panel.
![Wink ;)](./images/smilies/icon_e_wink.gif)
- Sun Feb 21, 2016 12:39 am
- Forum: erskyTx (was ersky9x)
- Topic: Adding MAVLINK support
- Replies: 596
- Views: 640057
Re: Adding MAVLINK support
No doubt about that!RCHH wrote:I reckon it is near enough for flying purposes though.
![Smile :)](./images/smilies/icon_e_smile.gif)
I just feel it is interesting to see all these things going on at the same time but show a little variation. Who says light/electrons/radio wave travel equally fast!
![Laughing :lol:](./images/smilies/icon_lol.gif)
- Sat Feb 20, 2016 11:25 pm
- Forum: erskyTx (was ersky9x)
- Topic: Adding MAVLINK support
- Replies: 596
- Views: 640057
Re: Adding MAVLINK support
Got my Minim hooked up. Here are two short video for you to judge how all 4 (watt meter, ersky9x mavlink, MP mavlink and Minim) comparatively. There is some inconsistency, but this could be the different timing for each one displaying the data. I can't really control that well on a live model for vo...
- Thu Feb 18, 2016 10:51 pm
- Forum: erskyTx (was ersky9x)
- Topic: Adding MAVLINK support
- Replies: 596
- Views: 640057
Re: Adding MAVLINK support
LTMNO: my 450 only draws <4A max without the prop, if you can put the prop reversed and move clockwisely one position it will generate a down thrust and be able to test the amp draw. I am curious if the voltage is reported incorrectly with higher current on my AIOP board with MPNG (a bug in MPNG). Y...
- Thu Feb 18, 2016 1:14 am
- Forum: erskyTx (was ersky9x)
- Topic: Adding MAVLINK support
- Replies: 596
- Views: 640057
Re: Adding MAVLINK support
Wow, looks like the code for Multiwii via FrSky D series is already there for OpenTx. That means it would be like eating peannuts for Mike to port to ersky9x? :lol: RCHH: Thx for the info, I need to look into detail for latest Multiwii now. ;) now back to Minim to see what is on the screen for MPNG....
- Wed Feb 17, 2016 11:59 pm
- Forum: erskyTx (was ersky9x)
- Topic: Adding MAVLINK support
- Replies: 596
- Views: 640057
Re: Adding MAVLINK support
Wooooooo, if Multiwii is fully functional, does that mean the next add on would be multiwii protocol to erky9x.
SONAR!!!, the MPNG does not support sonar. May be I should set up my HK AIOP V2 ~ Crius V1 with Muliwii![Wink ;)](./images/smilies/icon_e_wink.gif)
I wonder if my 915 Mhz radio link can be used with the new multiwii ?
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
SONAR!!!, the MPNG does not support sonar. May be I should set up my HK AIOP V2 ~ Crius V1 with Muliwii
![Wink ;)](./images/smilies/icon_e_wink.gif)
I wonder if my 915 Mhz radio link can be used with the new multiwii ?
- Wed Feb 17, 2016 10:24 pm
- Forum: erskyTx (was ersky9x)
- Topic: Adding MAVLINK support
- Replies: 596
- Views: 640057
Re: Adding MAVLINK support
I started the error, should be any FC (multiwii board or others) using MPNG/APM can use it. ![Wink ;)](./images/smilies/icon_e_wink.gif)
I read Multiwii new version also has map function similar to MP, what does it uses Now? A couple yrs ago, Multiwii does not have the capability that is why I switched to MPNG.
![Wink ;)](./images/smilies/icon_e_wink.gif)
I read Multiwii new version also has map function similar to MP, what does it uses Now? A couple yrs ago, Multiwii does not have the capability that is why I switched to MPNG.
- Wed Feb 17, 2016 6:18 pm
- Forum: erskyTx (was ersky9x)
- Topic: Adding MAVLINK support
- Replies: 596
- Views: 640057
Re: Adding MAVLINK support
I think is would be good to incoporate the code into part of APM. but keep the pro mini version, there are boards not running APM instead running Multiwii or MPNG, openpilot...... since this is a direct conversion of mavlink serial data, just about any FC has a serial out can use this.
- Wed Feb 17, 2016 3:56 pm
- Forum: erskyTx (was ersky9x)
- Topic: Adding MAVLINK support
- Replies: 596
- Views: 640057
Re: Adding MAVLINK support
Just need to work out now where to tap in for my MinimOSD and job done! Edit: DONE! Next addition ... lol!!! Are you saying putting the whole screen on Minim OSD? I guess putting that compass/direction figure on there would be good. I remember my minim has most of the data but no directional figure...
- Wed Feb 17, 2016 3:50 am
- Forum: erskyTx (was ersky9x)
- Topic: Adding MAVLINK support
- Replies: 596
- Views: 640057
Re: Adding MAVLINK support
Mike: Got my laptop mavlink radio working after driver fix. There is nothing wrong with your voltage data. It is the control board (MPNG/MP). The Mavlink radio to MP is reporting the same thing as your data as far as the Voltage. When high current draw the voltage is different from my watt meter but...
- Tue Feb 16, 2016 6:40 pm
- Forum: erskyTx (was ersky9x)
- Topic: Adding MAVLINK support
- Replies: 596
- Views: 640057
Re: Adding MAVLINK support
Mike: I ran the reverse blade test. the current scaling is just about perfect. I ran it all the way up to 20.8 A, every stage/bit matched my watt meter reading. :) There is something funny about the voltage. At static or low power the voltage reading is good, but with higher output (high rpm, high c...
- Tue Feb 16, 2016 1:41 am
- Forum: erskyTx (was ersky9x)
- Topic: Adding MAVLINK support
- Replies: 596
- Views: 640057
Re: Adding MAVLINK support
Who says it is not working! ;) Mike: it is working, figured out how to save the calibration of voltage and current. once entered the actual measurement (in my case, I read it off my watt meter) in the initial set up, obviously there is no place to 'save'. but go to 'configuration/tuning' -> full par...
- Mon Feb 15, 2016 10:12 pm
- Forum: erskyTx (was ersky9x)
- Topic: Adding MAVLINK support
- Replies: 596
- Views: 640057
Re: Adding MAVLINK support
Mike: just got my power module setup in MP (took me a while to figure out how to do it - it's been a while since Last time I set up MP) ;) Now I have the data from Mavlink radio. A quick test with power meter attached to lipo, on voltage (VFas), that seems to be pretty good, only 0.1 volt lower from...
- Mon Feb 15, 2016 7:33 pm
- Forum: erskyTx (was ersky9x)
- Topic: Adding MAVLINK support
- Replies: 596
- Views: 640057
Re: Adding MAVLINK support
I did come acrosss something about the A below 3A is not very accurate, that is why the person who did the vid saying need to get the A up to 10A to calibrate the current sensor. I am working on mine to test it. That guy come out with a good idea of reverse the blade and rotate them so the quad will...
- Mon Feb 15, 2016 4:50 pm
- Forum: erskyTx (was ersky9x)
- Topic: Adding MAVLINK support
- Replies: 596
- Views: 640057
Re: Adding MAVLINK support
did you 'save' the setting after you set it up initially? I 'think' you need to save the model 1st then modify the tuning then save it. I have noticed it does that to me too on other settings. What i just said is what I am going to try today. edit: Mike: Currently my quad has a voltage divider to D8...
- Mon Feb 15, 2016 3:35 pm
- Forum: erskyTx (was ersky9x)
- Topic: Adding MAVLINK support
- Replies: 596
- Views: 640057
Re: Adding MAVLINK support
Mike:
I ran across this last night. It may give some clue to you
http://diydrones.com/forum/topics/amp-t ... -converter
edit:
I also ran across this may help people using Taranis:
http://copter.ardupilot.com/wiki/common ... telemetry/
I ran across this last night. It may give some clue to you
http://diydrones.com/forum/topics/amp-t ... -converter
edit:
I also ran across this may help people using Taranis:
http://copter.ardupilot.com/wiki/common ... telemetry/
- Mon Feb 15, 2016 3:31 pm
- Forum: erskyTx (was ersky9x)
- Topic: Adding MAVLINK support
- Replies: 596
- Views: 640057
Re: Adding MAVLINK support
Thx, Kilrah and RCHH.
That diagram is exactly what i was arriving as conclusion last night. Now confirmed, I will fire it up today.
Mike:
I saw a MP video last night, you may need to to get a 10A load to calibrate the current sensor in MP.
That diagram is exactly what i was arriving as conclusion last night. Now confirmed, I will fire it up today.
Mike:
I saw a MP video last night, you may need to to get a 10A load to calibrate the current sensor in MP.
- Mon Feb 15, 2016 6:11 am
- Forum: erskyTx (was ersky9x)
- Topic: Adding MAVLINK support
- Replies: 596
- Views: 640057
Re: Adding MAVLINK support
yes Kilrah, after all night search on the web, that is my impression too. the issue would be the voltage divider, it MAY need a divider. Have not found that info yet. Can't find the original purchase order. Here is a pic of mine. I am not sure it is a 90A or 50A module. May be you can tell what is i...