openrcforums

OK guys, BIG THANK for both of you, looks like you people don’t sleep much trying to solve most of everybody’s problem ( you guys do better job that the politicians) I don’t know if you guys are married but mi wife was telling me” DO YOU HAVE A BETTER THING TO DO” I said yes!!! Program this radio an...

Hey, jhsa thanks men for remember me and SORRY for the other post or maybe a PM that I send, I really don't want to mess up this radio so here is... Yes, I have everything ready to go, I already soldered the cables on the board with the plug to connect the UBSasp and I communicate with the radio via...

SORRY!!!

Well I pick up where I left off,Quasimotoglez with "FlySky FS-TH9X with erx firmware LOCKDOWN!!!!" I finally got the board from HK and installed in the radio (it says Turnigy and no trim issue on power up) I painted the radio with GUN GRAY, installed the new board and back light, it comes ...

Kilrah wrote:Nobody on here has a full schematic for the current version of the 9x.

see if this help

Hi jhsa, remember me Quasimotoglez with "FlySky FS-TH9X with erx firmware LOCKDOWN!!!!" Well I pick up where I left off, I finally got the board from HK and installed in the radio (it says Turnigy and no trim issue) that had the problem and end up junk, well. I painted the radio with GUN G...

jhsa "Both heavily modded with telemetry, voice module, rotary encoder, extra switches, Model backup and restore to/from the voice module SD Card, etc" hey, I might be interested in those option with this radio, sound very scary, I like it. where can I get the info? I knew it...."Mike...

LOOK WHO IS WAITING FOR THE NEW BOARD!!!!!
I bought two boards form HK they still in back order, it might take a month or so....

"Just select M128 for the processor and er9x-128-frsky as the version to download"
Mike I'm confuse here, the radio I have is 9x/th9x no FrSky.
Jhsa or Mike , have you see any videos with this upgrade and the new features?

Funny thing is that they don't mention anything in the product detail about the Atmel128
I see that there is one less mounting crew on this board.
there is a replacement screen mention in the accessories will this board support the existing screen?

HOOLLYY CRAAAP!!! that's super cheap? I will order after you answer some question. please I might order two just in case!!!! GOT THEM ON MY CART...on two with S&H is $24.29 NOT BAD.... so will that work with this radio eventually is the same , but Atmega128? is more memory? something got to chan...

well guys, I'M VERY VERY thankful for everything and every effort you have put in trying to solve my situation. unfortunately all those picture don't mean anything since I was playing with my meter set to read voltage touching the contacts from the ground to one end of the xtal, it start giving me t...

OK BOYS, I DIDN'T WANT TO COME DOWN THIS WAY, BUT THIS WAS IT LAST WORDS!!!!
TEST IS OVER.....

“This is wrong, there should be over 1Mohm resistance between point A and point G”. Mike, I don’t know if can read schematic or you measure it wrong, but is obvious that from pin 11 (SCK) to ground can’t be over 1Mohm when you have a resistor (200 Ohms)and a capacitor (240 nf) in series to ground, e...

is logic to be confuse as I'm jhsa, but we are not going anywhere back an forth looking for part that are short out or open when I have strip down the board to discard any confusion of being short out, when the real problem come from the program itself. somehow one of the switches (I mention before ...

IMG_5254.JPG IMG_5253.JPG these are the pictures of the board the missing capacitor and resistor are also to discard just in case of any shortage via ground in this case the pin 20 (reset) via AVcc in pin 64 the blob of solder in pin 11(SCK) is because I cut it to Isolate any contact with possible ...

9xSchematics.pdf "I just measured one of my boards and I have a infinite resistance ( no connection) between pin 11 (SCK) and ground. you removed the switches, right? Please measure the pads where the menu button is normally soldered, are they shorted?" is not possible, look at the diagra...

thanks for all your effort jhsa, but as you can see by now that chip is on a lockdown stage or unprogrammable this radio was "brand new" working perfect with an without the firmware and the buttons and switches were working fine, I even did a calibration, receiver binding, etc... it has to...

well that's it all or nothing friends
what else an I do, maybe replace the chip or the board.

http://www.youtube.com/watch?v=J-I0jqfki2c

Hi openRC friends out there, I have a issue with my radio after I installed the er9x fw VERS: V1.127-Mike DATE:08-04-15 TIME:13:15:26 SVN:er9x-r817 MOD:--------- I have got to put only 2 models so mem is good 1-QuadCopter 2-Reptile KK for some reason the next day when I turn it on give me this sign....

Hi everyone I'm new at this ( posting forum etc...) I was wondering if any body can tell me how to post a thread ( already have a blog that nobody is interested) or move the blog to a post , I have no Idea where to start. I have an issue with my radio FlySky fs-th9x-B that I can't solve by myself I ...