openrcforums

I'm able to back the eeprom up to the HD, and I can flash the firmware if I uncheck backup and restore eeprom. It finishes with Samba errors, but seems to be successful. Then I can restore my eeprom from the file. Also with errors, but seems to work. Unable to use the simulator at all. Anyone? Sent ...

I'm hoping someone will be able to help me. I've asked about this issue several times, many months ago, but I've never been able to get it resolved. I am unable to flash new firmware or load eeprom into Companion. I can save it it a file, but it acts like it isn't completely finished, it goes to 96%...

I have tried uninstalling and reinstalling Samba and replacing the tclib file from the wiki. No changes. There must be some kind of issue with the board. I've never run anything other than Open9x /OpenTx and it's always been fine. I guess I need to open it up and try a reset. I'm reluctant because e...

I just discovered that if I save the eeprom to a file, I am able to open from that file even though it only says it only completed 98%. I'm just afraid to then try to burn it back to the TX because I'm worried something will fail and render my TX useless until I figure this out.

OK. I uninstalled then reinstalled SAMBA and unzipped the latest tcl_lib file from the Wiki. I am getting the exact same result as posted above. When I try to read eeprom form TX, it gets to 98% and stops. I still can't use C9x for anything. I also tried eepskye with the same result. Everything was ...

I'm on W7. How do I get the output log?

I just tried eepskye. Same thing. When I try to read eeprom to a file, I get a read error. It finishes to about 95%.

Showmaster, you're talking about someone else's radio. You helped me with this one before I got the Sky board.

Mine is currently working, I just can't read the eeprom in C9x I get an error when flashing too, but it seems to flash anyway.

Hopefully we can both get things straightened out.

I tried posting this in the C9x forum but no one has responded. I'm hoping someone can help me. I'm unable to flash firmware or read my eeprom. This is a recent problem. I hadn't updated my firmware in a month or two and when I did, I also updated C9x. I had a little trouble flashing the latest firm...

I have a FlySky 9x with a Sky9x board. I recently updated to the latest versions of OpenTx and C9x. I'm not sure which is causing my problems. When I try to read my eeprom, the process finishes to about 96% and then fails. I had the trouble while trying to update OpenTx, but it seems to have worked ...

I'm using the latest version. Still the same behavior. I always keep the freshest version installed.

Sent from my DROID BIONIC using Tapatalk 2

I'm still having an issue where center beeps kill all sounds until I restart the TX. Any chance that will be fixed?

viewtopic.php?t=2520

Sent from my DROID BIONIC using Tapatalk 2

I'd like to see a description of how to set up voice with telemetry like battery voltage, timers, RSSI, etc. I'm having some trouble with that and it seems difficult to find much information about setting it up.

Sent from my DROID BIONIC using Tapatalk 2

I started my research because I am setting my quad up for FPV. I don't need too much range, but more is always better and goes a long way to boost confidence. Some of the threads I read said that you only need to replace one of the antennas for greatly improved range, but both is better. I was think...

I've been reading about this exact topic today! It seems that many people have replaced the RX antennas with a pair of Clover Leaf antennas and a Skew Planer Wheel on the TX (might be reversed). People are claiming 2 to 3 times the range and no issues during high bank turns. Might have to give it a ...

Center beep in think is constantly interrupting the playback. Does the issue occur if you love the pot just off center so it does not want to beep? Sent from my Nexus 7 using Tapatalk 2 No problem until the center beep plays. I'll try to upload a video and my eeprom when I get home from work if it ...

I'm not sure where to post this since I don't know if the problem is the board, the software, me, or my SD card, so I'll just put it here and see what happens. I am using the latest version of Open9x and a Sky9x board (not the newest one but one of the latest of the older ones). I've been trying to ...

Interesting. Hope it gets sorted. No big deal though.
Thanks

Sent from my DROID BIONIC using Tapatalk 2

I'm having the same problem here too. Also using Open9x and the Sky9x rev B.

Sent from my DROID BIONIC using Tapatalk 2

Thanks Kilrah!! I got everything working! Now I just need to figure out how to set voice files to be triggered by the A2 output on my FrSky module. I want a voice alarm for low flight pack battery. Any suggestions?

I could really use a little help with programming my TX for use with NAZA and GPS too. I am using the latest version of C9x (as a side note, I cannot get the tx simulator to work in this version) and a Sky9x board. I am trying to program a failsafe switch that will work in either GPS or ATTI mode. O...

For 2 person control couldn't you just hook the camera stuff to the LP5DSM receiver? Then you wouldn't be connected by a cord.

Sent from my DROID BIONIC using Tapatalk 2

I want "danger zone" to play when the throttle is above 80%.

Sent from my DROID BIONIC using Tapatalk 2

I'm using the Sky9x board and Open9x. Is there a way to use a pot to scroll through the menus? I could do it in Er9x.

Sent from my DROID BIONIC using Tapatalk 2

Nevermind. Everything's working correctly now. Thanks

I have the same sensor soldered to the 3s pad connected to the A2 port of a DBR II Plus RX. When I set the max voltage to 19.8v and offset at 0, 19.8 volts is always displayed regardless of the battery voltage. I'm using a 3s battery. I'm using Open 9x 1379 with a Sky9x board. Am I doing something w...

I've had similar problems with Spektrum. Never going back. I'd put more confidence in the cheap FlySky stuff.

Sent from my DROID BIONIC using Tapatalk 2

Use as-is.

Sent from my DROID BIONIC using Tapatalk 2

I forgot to mention in my previous post that the Wiki is great for a lot of stuff and I'm glad to see all of the updates.

Also, maybe we could add a classifieds section for buying and selling boards, parts, services, etc.

Sent from my DROID BIONIC using Tapatalk 2

I am pretty sure that most people just use the. "View unread" option. That way I just see everything :-) Sent from my Nexus 7 using Tapatalk 2 Yeah, I guess that's what Tapatalk does, I just haven't used that feature on the PC. I'm almost always looking at the forum on my phone. Thanks Se...