10 T.Fariss 10 CamControl Since the channel's source is itself, the channel holds its value unless otherwise influenced. This mix progressively adds (or subtracts) from the servo value in proportion to the stick position. If the stick is at center, the servo stays wherever it is. If the stick is off center, the servo moves in that direction at a rate linked to the stick displacement. Weight affects overall sensitivity. Curve9 provides some expo and is optional. SW1 avoids servo drift by creating a dead band at center. This is useful for sloppy gimbals, pots with no center indication, etc. - it makes "center" a bigger target. Alter SW1 V2 to change the size of the dead band for your specific needs. This acts as an upper bump-stop for the servo value. This acts as a lower bump-stop for the servo value.