How to edit flash sceen
How to edit flash sceen
Okay, I want to put my name as pilot on the stock flash screen. How do I pull that from the hex fill to place in my editor?
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: How to edit flash sceen
What firmware? If you are running er9x, there is an option to enter your name; and an option to turn the name display on/off.
long press the left button to get to it!
long press the left button to get to it!
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
Re: How to edit flash sceen
Okay, Thank you.
Re: How to edit flash sceen
Hi
Is there spacific software for designing splash screens please?
Regs Os
Is there spacific software for designing splash screens please?
Regs Os
- Crashj007
- Posts: 133
- Joined: Tue Jan 31, 2012 11:44 pm
- Country: -
- Location: Raleigh, NC, USA
- Contact:
Re: How to edit flash sceen
Oshb5ems, MS Paint works okay. You just need to be able to save as a monochrome BMP file, 64 x 128 bits.
There are two different things being discussed here, pilot name, and splash screen. If you search for the splash screen discussion there is a whole thread devoted to how to do it.
viewforum.php?f=43
There are two different things being discussed here, pilot name, and splash screen. If you search for the splash screen discussion there is a whole thread devoted to how to do it.
viewforum.php?f=43
--
FS-TH9X 2.4GHz 9CH from Nitroplanes
Smartieparts board & backlight
Stock Flysky RF and mainboard
er9x FW V 744
FS-TH9X 2.4GHz 9CH from Nitroplanes
Smartieparts board & backlight
Stock Flysky RF and mainboard
er9x FW V 744
Re: How to edit flash sceen
Hy,
I take Irfanview
load splash, zoom it,
open draw equipment
change or modify a splash
save as BMP
ready
Helle
I take Irfanview
load splash, zoom it,
open draw equipment
change or modify a splash
save as BMP
ready
Helle