I....I'm totally lost on wth I'm doing...I thought I could meander through open-txu.org, but it's totally not the same from the taranis to the 9x....
I have opentx running on a 9x and I'm trying to figure out how to setup a Blade SR (or any) heli with an ar6100e rx.
But I also don't know how to set up a heli anyway, besides the fact that I don't know jack about opentx programming.
I've looked through the wiki and the 9x manual, but i'm new and slow in the head.
Is there a plain walk through step by step kind of setup manual for the 9x and a basic 120 heli?
Totally lost:noob trying to setup opentx for SR heli
-
- Posts: 213
- Joined: Tue Jun 16, 2015 2:05 am
- Country: United States
- Location: durham, nc
-
- Posts: 213
- Joined: Tue Jun 16, 2015 2:05 am
- Country: United States
- Location: durham, nc
Re: Totally lost:noob trying to setup opentx for SR heli
It can't be that easy.
I selected "06 heli setup" under "templates. Everything seems to be setup. TH and flight mode (acrobatic).
Now I have to figure out this BLheli stuff and make sure my ESC's arm and operate. Then, slap it all back together and try to fly!
I selected "06 heli setup" under "templates. Everything seems to be setup. TH and flight mode (acrobatic).
Now I have to figure out this BLheli stuff and make sure my ESC's arm and operate. Then, slap it all back together and try to fly!