XJT Module
XJT Module
So, I have a Sky9x, Rev B1 board. What are the chances it will work with the new FR-SKY XJT transmitter module?
Rick
Rick
-
- Posts: 9
- Joined: Wed Oct 03, 2012 5:02 am
- Country: -
Re: XJT Module
I'm awaiting the release if the module as well. Should be almost plug & play other than telemetry. You need to route that to one of the com ports on the sky9x board. There was a thread where the DHT module was modded so there was an extra plug in the back that connected to a com port. Obviously there needs to be support in the firmware for telemetry. Since opentx already has it I see no reason ersky9x shouldn't. Perhaps Mike knows the differences in the telemetry for the new module/Rx. If there is any.
- MikeB
- 9x Developer
- Posts: 17995
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: XJT Module
The XJT uses the new SPORT that uses a single wire for bi-directional communications, and also uses a different data protocol.
There may be other issues as well.
Mike.
There may be other issues as well.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: XJT Module
so the XJT won't be a drop in replacement for the D series modules??
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: XJT Module
Of course it will. There is also the same serial port as before next to the smart port.
The point is that mods will be a little different.
Sent via mobile
The point is that mods will be a little different.
Sent via mobile
Re: XJT Module
I will get a couple (I hope they have an internal modules as well) to replace my two modules, as I want the PXX and some of the goodies that come with it
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: XJT Module
Hi Guys,
Can anyone confirm, what the nominal or standard TSSI display reading for the XJT module please. I am running Rev 3 Skyboard with r202 feb 21 version.
Stan.
Can anyone confirm, what the nominal or standard TSSI display reading for the XJT module please. I am running Rev 3 Skyboard with r202 feb 21 version.
Stan.
He who knows not and knows not he knows not, is a fool: SHUN HIM.
He who knows and knows he knows, is a wise man : SEEK HIM
But he who knows not and knows he knows not, is a baby: TEACH HIM.
He who knows and knows he knows, is a wise man : SEEK HIM
But he who knows not and knows he knows not, is a baby: TEACH HIM.
- MikeB
- 9x Developer
- Posts: 17995
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: XJT Module
On the XJT module we no longer have the TSSI value, instead it sends a SWR (reflected power) value. This should be close to 0, although you might see anything up to around 30. If it goes over around 50, then it is telling you you have an antenna problem on the module.
I need to change the text on the display when operating a XJT module (when I get a moment!).
Mike.
I need to change the text on the display when operating a XJT module (when I get a moment!).
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: XJT Module
Great Mike Thanks for the update. My module is showing a value of49. I will have to check my linkages.
Stan.
Stan.
He who knows not and knows not he knows not, is a fool: SHUN HIM.
He who knows and knows he knows, is a wise man : SEEK HIM
But he who knows not and knows he knows not, is a baby: TEACH HIM.
He who knows and knows he knows, is a wise man : SEEK HIM
But he who knows not and knows he knows not, is a baby: TEACH HIM.
Re: XJT Module
Mike,
I finally got the TSSI display readout down to 33. Do you think that will be OK now ?.
Stan.
I finally got the TSSI display readout down to 33. Do you think that will be OK now ?.
Stan.
He who knows not and knows not he knows not, is a fool: SHUN HIM.
He who knows and knows he knows, is a wise man : SEEK HIM
But he who knows not and knows he knows not, is a baby: TEACH HIM.
He who knows and knows he knows, is a wise man : SEEK HIM
But he who knows not and knows he knows not, is a baby: TEACH HIM.
- MikeB
- 9x Developer
- Posts: 17995
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: XJT Module
Yes.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: XJT Module
Thanks for the confirmation Mike. Cheers.
Stan.
Stan.
He who knows not and knows not he knows not, is a fool: SHUN HIM.
He who knows and knows he knows, is a wise man : SEEK HIM
But he who knows not and knows he knows not, is a baby: TEACH HIM.
He who knows and knows he knows, is a wise man : SEEK HIM
But he who knows not and knows he knows not, is a baby: TEACH HIM.