Page 1 of 1
OpenTX Release Candidate Review by Jonathan Wells
Posted: Tue May 21, 2013 8:59 pm
by Rob Thomson
As some of you may already have picked up - some shops have received a pre-production Taranis.
In the UK, Richard from
T9 has passed the Taranis on to Johnathan Wells. @jonathanw
A quote from Richard as follows:
Hi guys just to keep you abreast of things, we got our first production Taranis set at T9 to oggle This set has been sent to us for Jonathan Wells who is now a sponsored pilot by Frsky, for his valuation.
Jonathan is a successful pilot both in F3B and F3J in the UK and will know how to get the best out of the Taranis. He will be offering his thoughts about the hardware and software programming for glider use over the next couple of weeks untill the first batch arrive!
Our first thoughts are the quailty is good and the feel of the TX in hand is good. The sticks feel very smooth. Jonathan will probably give you more details soon.
I had a chat with Johnathan about 20 minutes back, and he has kindly agreed to use this thread for posting any questions and general experiences of the radio, programming it, flashing etc.
As one of Jonothans first jobs to do will be to look at re-flashing the radio - I figure some guidance on software requirements and setup would be a good starting point!
Rob
Re: OpenTX Release Candidate Review by Jonathan Wells
Posted: Tue May 21, 2013 9:38 pm
by bertrand35
What is the FW release he has? How much EEPROM? 32k or 64k?
Re: OpenTX Release Candidate Review by Jonathan Wells
Posted: Tue May 21, 2013 9:45 pm
by Rob Thomson
No idea!
Jonathan.. you can find the details as follows:
Long press MENU button; then press the page button 3 times.
You should get a screen like the following.
Can you let us know which version number?
Re: OpenTX Release Candidate Review by Jonathan Wells
Posted: Wed May 22, 2013 5:24 am
by Kilrah
And also how much free space is reported on the top bar of the model select screen:
Re: OpenTX Release Candidate Review by Jonathan Wells
Posted: Wed May 22, 2013 8:48 pm
by jonathanw
Hi Rob,
I’ve only just noticed your last post sorry.
Thank you for helping me with updating the firmware.
I’m going dynamic soaring tomorrow and will be testing the Taranis.
Jonathan
Re: OpenTX Release Candidate Review by Jonathan Wells
Posted: Wed May 22, 2013 8:52 pm
by jonathanw
Kilrah wrote:And also how much free space is reported on the top bar of the model select screen:
Kilrah,
There are 12 characters.
Jon
Re: OpenTX Release Candidate Review by Jonathan Wells
Posted: Wed May 22, 2013 8:53 pm
by Rob Thomson
No problem. I should have held back and not flashed before checking myself!
Please double check your model works as expected after the update. Always safer to check!.
I look forward to hearing how you get on. Would also be great to get your thoughts on the vario?
Rob
Sent from my GT-I9300 using Tapatalk 2
Re: OpenTX Release Candidate Review by Jonathan Wells
Posted: Wed May 29, 2013 3:34 pm
by jonathanw
Testing the FrSky Taranis
I thought it would be a good test for Taranis flying one my ds models.
I’m very happy with the TX. I can't believe the Taranis’s capability for it’s price. This flight was recorded on the TX’s internal memory card, I can view the RSSI, Battery voltage and stick positions for this flight WoW.
I have tested the Vario in an f3j model, it’s very accurate. I went slope soaring the other day in light wind/lift hooked a thermal that had just lifted and took it up to just under 1500ft limited by neck ache.
Here’s a video of my ds flight:
[BBvideo 425,350]
http://vimeo.com/67177615[/BBvideo]
Re: OpenTX Release Candidate Review by Jonathan Wells
Posted: Wed May 29, 2013 3:49 pm
by Kilrah
Cool!
Could you share the log file, we're currently looking at the RSSI instability issue, it would be nice to see someone else's results
Re: OpenTX Release Candidate Review by Jonathan Wells
Posted: Wed May 29, 2013 4:03 pm
by jonathanw
hI Kilrah,
Here you go
.
Jonathan
Re: OpenTX Release Candidate Review by Jonathan Wells
Posted: Mon Jun 10, 2013 3:48 pm
by Rob Thomson
Good to see Jonthan is making use of his Taranis!
He came 10th in the UK F3F racing yesterday.