Aurora Gimball out of market ? : hh DX7 gimball will fit !

[acefx]

Hi everybody, a kit message to tell everyone that the spektrum DX7 gimball are fitting like a charm !
It's exactly the same diameter, you don't even need to apply sanding job.
The only needed mod is on the side fix that need to be cut...
I'm invertigating to see if there is more compatibylity in the dx line of product ( old dx5 are cheap to buy, they are used in the dsm mod to get the spektrum hf module ! And ghey will certainly have some better gimball than tgy 9x stock one

[kaos]

Any pic? and where can you buy dx7 gimbal?

[sycons]

Just ripped apart an old DX5..no fit

[acefx]

i will post the pic tomorow.
in fact i had a dx7 wreck @ home so i tried and succeed.
i don't this it' possible to buy dx7 spare part, but in case someone have an old spektrum @ home it will fit.
you don't need to boost the gain on the Sky9x motherboard, so the stock one will do certainly the job too

[acefx]

Here's the Picture :





I can told you that at first time at home i didn't feel a real difference, but on field with a plane... it was incredible!
the precision in sticks are way better than stock.

[afilho]

i will post the pic tomorow.
in fact i had a dx7 wreck @ home so i tried and succeed.
i don't this it' possible to buy dx7 spare part, but in case someone have an old spektrum @ home it will fit.
you don't need to boost the gain on the Sky9x motherboard, so the stock one will do certainly the job too

Could you sell me the mother board of your dx7? i was changing the on/off switch on my dx7 and the board with the fuse touched the mainboard and not my dx7 is not working...i had the battery connected at the time. im in Brazil and i cant afford to send the radio to the USA for repair, and i need a radio to fly. if you can help me i would appreciate. let me know how we can do. [email protected]