Hi people, just to make sure ... the pinouts for the FrSky DJT plug in module and the DHT diy TX module are both 4 pins and the same layout? I am talking about the 4 pins for the firmware update port/telemetry interface, not the 5 pin main connector on the DJT module. Have done the backlight/smartieboard/DHT mods and am waiting for the telemetrEZ board, which is on its way. Have made all the connectors already, but hope I did not miss anything that might be different between the DJT and DHT modules ...
Have a good weekend!
Marco
FrSky DJT and DHTpinouts for telemetrEZ mod
Re: FrSky DJT and DHTpinouts for telemetrEZ mod
After some searching I found a few post stating that the DHT module is the same as the DJT, without a case ... FrSky is not supplying a lot of info in their publications/manuals
Marco
Marco