simulator phoenixrc
simulator phoenixrc
I use sim phoenix rc v2.5 at turnigy 9x. how should I set up tx at sim? I need your help. thank you
Re: simulator phoenixrc
When I setup my transmitter for Pheonix I just setup the 4 channels in a basic mix and then made the other 4 channels on switches. I attached an eepe model file that you should be able to upload and try. You may have to reverse some channels or move the switch channels to the switches you like.
- Attachments
-
- PHOENIX.eepm
- (1.08 KiB) Downloaded 479 times
Re: simulator phoenixrc
This assumes that you have the er9x firmware on the radio. If it is stock then this won't work.
Re: simulator phoenixrc
where should i put and upload phoenix.eepm file ???
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: simulator phoenixrc
Have you used eepe or companion9x before?
Sent from my Nexus 7 using Tapatalk 2
Sent from my Nexus 7 using Tapatalk 2
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
Re: simulator phoenixrc
First thing to know is if you're using the stock 9x firmware or if you have reflashed it with one of the custom firmwares.
Re: simulator phoenixrc
companion9x. what should i do???
- Westy
- Posts: 248
- Joined: Tue Jan 31, 2012 8:44 pm
- Country: -
- Location: Te Awamutu, Waikato, New Zealand
Re: simulator phoenixrc
I just opened Crucias eepm file in Eepe and saved it models in eepe..... saved as an Epee file. Companion 9X will not open or read eepm files and only hte latest will opem eepe file format.... so here you go.
Open in Companion 9x and write to your Tx. I am assuming you now yor way around compaion 9x?
Open in Companion 9x and write to your Tx. I am assuming you now yor way around compaion 9x?
- Attachments
-
- PHOENIX.eepe
- (1.31 KiB) Downloaded 427 times