i'm using oXs with "GPS number of sats & hdop" configured
So these sensors occupy appId 0x400 resp. 0x410.
Now i'm using an YGE ESC which is using 0x400 for temperature too.
Tx is announcing sensor conflict every x seconds ))-:
There is no chance to change anything on YGE side.
So i wanted to change the appId of my oXs but can't figure out how to do.
I can see some appId ranges in the oXs_out_frsky.h file, but these parameters don't influence the effective oXs config.
even changing alt ID's didn't work
Code: Select all
#define ALT_FIRST_ID 0x0100
#define ALT_LAST_ID 0x010f
...
#define T1_FIRST_ID 0x0400
#define T1_LAST_ID 0x040f
#define T2_FIRST_ID 0x0410
#define T2_LAST_ID 0x041f
thanks & regards
udo