openrcforums

So I have a weird thing going on, At first I had it all set up in my 6ch airplane, Im using the TBS tracer with the 6ch Nano rx. Theres no mixes or anything when I created a new model. So the problem is, when I move the aileron stick to the left the rudder servo starts glitching, if I move the aileron stick right the flaps start twitching, if i move the elevator down the rudder starts twitching.

So I did another test outside the plane on the workbench and just used 2 servos, I plugged one servo into the aileron port on the rx and plugged the other servo into the rudder port and plugged in a rx battery . Soon as I moved the aileron stick to the left , the rudder servo glitches, now here is something really weird. I have no servo plugged into the elevator port on rx, but if I pull back on the elevator stick the rudder servo glitches.

So Im so confused on whats going on , is there a fix for this or is something broken