This is my first post and I’m a little intimidated .
I just purchased a frsky Horus x10 express with fros operating system .I haven’t done any RC related stuff in about 25 years but want to get back in things. Long story short I can’t get the transmitter to bind with a frsky receiver I’ve tried everything and looked at hours of YouTube videos I’m just not getting it so any help would be greatly appreciated .
Thanks in advance
Mark
Horus x10 express not binding
Re: Horus x10 express not binding
Not much to go about without knowing what receiver...
Re: Horus x10 express not binding
Thanks for replying so quickly.
The receivers I have two are r-Xsr and Xm+ lm new at this so please be gentle.
Thanks
Mark
The receivers I have two are r-Xsr and Xm+ lm new at this so please be gentle.
Thanks
Mark
Re: Horus x10 express not binding
Need to update your receiver firmware first before binding , especially old receivers.
-
- Posts: 1
- Joined: Wed Feb 03, 2021 4:30 pm
- Country: -
Re: Horus x10 express not binding
what if the receiver firmware has already been updated, but there is no change? i had a similar problem a while ago
"Life is what happens to us while we are making other plans."
https://www.worktime.com/
https://www.worktime.com/
Re: Horus x10 express not binding
Then you also need to update the radio's internal module.