Hi!
Found this line in the description: It is also possible to build a small PCB board that will provide pulsed when connected on a brushless wire.
Searched this forum and tried to google but didnt find any leads.
Has anyone made or can give me directions to this kind of schematic?
I have seen hobbywing rpm sensor but would like to try to diy and fail before buying it.
And again, many thanks in advance!
Juhani
Brushless rpm sensor from esc output wires
Moderator: rainer
Re: Brushless rpm sensor from esc output wires
I use my DIY rpm sensor with oXs.
The hobbywing rpm sensor also works fine.
Have a look at my German thread here ....
http://www.rc-network.de/forum/showthre ... hlight=rpm
The hobbywing rpm sensor also works fine.
Have a look at my German thread here ....
http://www.rc-network.de/forum/showthre ... hlight=rpm
- Attachments
-
- bldc_rpm_sensor.gif
- (6.07 KiB) Not downloaded yet