Yet another Chinese knockoff USBasp question

Post Reply
hackerjoe
Posts: 50
Joined: Fri Dec 08, 2017 1:58 am
Country: United States

Yet another Chinese knockoff USBasp question

Post by hackerjoe » Mon Mar 26, 2018 11:10 pm

USBasp1.jpg
I have been reading some of the post and thought maybe I could fix my inop Chinese knockoff programmer.
I have 2 different programmers ( one ordered from Hobby King & the other ordered from Banggood ) that work out of the box. They aren't Chinese knockoffs.

Anyway I got home from work and noticed the case on the programmer pinout and the pinout on the PCB are not the same.
Miso & SCK are mixed up.
I may not have been wiring this correctly is there a pinout somewhere that I can check the SCK & Miso and know for sure.
There is no definite make just USB ISP on it as you can see on the case in the attached photo.

hackerjoe
Posts: 50
Joined: Fri Dec 08, 2017 1:58 am
Country: United States

Re: Yet another Chinese knockoff USBasp question

Post by hackerjoe » Tue Mar 27, 2018 11:52 am

Ok I tried using another USBasp & Arduino in ISP mode but nothing has been able to see the Chinese programmer no matter how the pins were. :shock:

I don't even see any J2 jumper on it either so I am going to call it wasted time and money. :roll:

Windows see it but I can't use it to program anything go figure. None of the applications I have used acknowledge it is installed.

Post Reply

Return to “PROGRAMMERS”