A Custom Tray For The 9x
Re: A Custom Tray For The 9x
Make sure the C of G is correct after loaded
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: A Custom Tray For The 9x
You could also program in a custom switch/curve to apply a little down elevator when you go past 70% throttle!
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
Re: A Custom Tray For The 9x
I normally would say, don't throw the model upward when starting, throw it flat.
Your starting speed obviously is not high enough for climbing, so the model drops down.
Reinhard
Your starting speed obviously is not high enough for climbing, so the model drops down.
Reinhard
Re: A Custom Tray For The 9x
In my case is not a matter of lack of power.. my plane can climb nearly vertically.. it's really the wrong motor angle
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: A Custom Tray For The 9x
João,
Got a reply from JB and he has found a cheaper freight method and is supplying in flat pack form.
Just ordered a Red one.
Thanks for the Intro to the tray.
Les
Got a reply from JB and he has found a cheaper freight method and is supplying in flat pack form.
Just ordered a Red one.
Thanks for the Intro to the tray.
Les
Re: A Custom Tray For The 9x
I hope you enjoy it.. I do..
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: A Custom Tray For The 9x
João,
Just received my tray, nicely packaged and didnt realise it was made up of so many bits.
All ive got to do now is glue it together.
Thanks again for the heads up, cant wait to try it. First have to finish moding my radios, both are in a no go state at the moment.
Les
Just received my tray, nicely packaged and didnt realise it was made up of so many bits.
All ive got to do now is glue it together.
Thanks again for the heads up, cant wait to try it. First have to finish moding my radios, both are in a no go state at the moment.
Les
Re: A Custom Tray For The 9x
Don't forget the pictures
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: A Custom Tray For The 9x
Hi João,
Finished assembling the stand, but unfortunately my 9x doesnt fit properly.
You know the little notches on either side that the handle fits into and the locking devices that come over the handle to lock it.
These are to low. It appears the distance between where the base of the radio sits and these little notches the handle sits in are
165mm. Measuring this distance on the radio, i make it at 175mm so we seem to be short by 10mm.
I havnt been on to JB yet as i will try and send him some pics tomorrow.
I will have to try and move the locking devices up and this may make it useable.
Les
Finished assembling the stand, but unfortunately my 9x doesnt fit properly.
You know the little notches on either side that the handle fits into and the locking devices that come over the handle to lock it.
These are to low. It appears the distance between where the base of the radio sits and these little notches the handle sits in are
165mm. Measuring this distance on the radio, i make it at 175mm so we seem to be short by 10mm.
I havnt been on to JB yet as i will try and send him some pics tomorrow.
I will have to try and move the locking devices up and this may make it useable.
Les
Last edited by iwik on Sat Oct 27, 2012 9:59 am, edited 1 time in total.
Re: A Custom Tray For The 9x
Les, please send him some pics. I find it very strange because it is laser cut.
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: A Custom Tray For The 9x
Yes i was a bit surprised as well. When i saw they were laser cut i also thought that one would be able to slot the assembly together dry. But not so, i tried before glueing but the fit was quite sloppy. Thats why i had to glue it before i could try and fit it. Those measurements i gave should have had 100mm added
i will edit my post shortly.
Les
i will edit my post shortly.
Les
Re: A Custom Tray For The 9x
Just read your post above again and the difference is 10mm not 100mm.. Ok, before you change something can you post pics so I can compare to mine? I will call my friend back in Portugal.. As I said, I find it strange because I think laser cutters don't make mistakes like that. But since I saw a pig ridding a bike, I believe in everything..
Joao
Joao
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: A Custom Tray For The 9x
What i meant re the 100mm was the two measurements i gave you should have been 165 and 175mm but the difference is tsill 10mm as u say. I was wondering if the 2 back vertical plates are a diff height for other radios.
Its morning now so will get some pics together and send to JB. I noticed from your pics that there are diff between yours and mine.
Les
UPDATE:
Just tried my Stock 9x and now know that its a very snug fit into the stand and fits beautifully). The problem is with my Ersky9x radio, the mini din connector sticks out a little and because of the snug fitting there is not enough room to for the radio to move and slot in
properly to the stand. Will just have to make the slot for the charger socket(now mini din socket) a little wider and my esky9x should fit.
Very pleased how it fits,looks.Thanks Joao for the intro to the Tray.
Les
Its morning now so will get some pics together and send to JB. I noticed from your pics that there are diff between yours and mine.
Les
UPDATE:
Just tried my Stock 9x and now know that its a very snug fit into the stand and fits beautifully). The problem is with my Ersky9x radio, the mini din connector sticks out a little and because of the snug fitting there is not enough room to for the radio to move and slot in
properly to the stand. Will just have to make the slot for the charger socket(now mini din socket) a little wider and my esky9x should fit.
Very pleased how it fits,looks.Thanks Joao for the intro to the Tray.
Les
Re: A Custom Tray For The 9x
I thought it could be something simple.The tray was made for the 9x case without anything sticking out I hope you have as much fun with it as I'm having with mine.. It makes it really easier to launch the planes.. I only started this thread because I thought the tray was a good idea and it looks really nice.
Please post some pictures of yours here
João
Please post some pictures of yours here
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: A Custom Tray For The 9x
Hi Joao,
I know what the problem is. The S.O.B have made the handles bigger. See my attached pics of the two radios i have.
Both are 9x,the one on the right doesnt fit and the left one does.
Will email JB an dlet him know.
Les
I know what the problem is. The S.O.B have made the handles bigger. See my attached pics of the two radios i have.
Both are 9x,the one on the right doesnt fit and the left one does.
Will email JB an dlet him know.
Les
Re: A Custom Tray For The 9x
Ha, and what about that?? it's the first time I see a radio with a bigger handle
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: A Custom Tray For The 9x
Yes a real P.I.A. My best bet is to see if i can swapp handles with someone as there seem to be many people with spare radios and im sure they are not
using the stand that we have. Rob was thinking of getting one of those stands,did he get one?.
using the stand that we have. Rob was thinking of getting one of those stands,did he get one?.
Re: A Custom Tray For The 9x
I have no idea.. Maybe Rob can answer that..
The guy that makes them is a friend of mine from my old club but lives 3000 Km from here.. I don't speak to him everyday
But I will probably call him tomorrow and tell him about this 9x handle problem. He had only one radio there and we all assumed that there is only one size..
Is that one of those radios that HK was selling without module? I'm asking because of the other difference in the module bay around the pins.. If it is would be interesting if people would check the handles to see if they're all bigger..
Joao
The guy that makes them is a friend of mine from my old club but lives 3000 Km from here.. I don't speak to him everyday
But I will probably call him tomorrow and tell him about this 9x handle problem. He had only one radio there and we all assumed that there is only one size..
Is that one of those radios that HK was selling without module? I'm asking because of the other difference in the module bay around the pins.. If it is would be interesting if people would check the handles to see if they're all bigger..
Joao
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: A Custom Tray For The 9x
Nah... Never got round to buying one. Too many other things to spend my money on
Sent from my Nexus 7 using Tapatalk 2
Sent from my Nexus 7 using Tapatalk 2
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
Re: A Custom Tray For The 9x
The radio was bought as complete unit, rx and tx all ready to go. Before the radio was available as moduleless unit.
Re: A Custom Tray For The 9x
Very strange..
Don't forget to post some pics of your tray.. we would like to see it
Don't forget to post some pics of your tray.. we would like to see it
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: A Custom Tray For The 9x
I have 3 radios, an old one without plastic, a newer one with module and with plastic, and one without module and with plastic... All have the same short handle.
Gotta love Chinese.
Sent via mobile
Gotta love Chinese.
Sent via mobile
Re: A Custom Tray For The 9x
Here is another tray construction.
Senderpult ebay
Maybe it´s not so fuzzy what kind of radio you put in it.
It looks like a copy of Hobbykings tray.
Hobbyking tray
And if you look at both of them you realize that you could do them yourself !
@ JHSA sorry if i hijacked your thread .
Senderpult ebay
Maybe it´s not so fuzzy what kind of radio you put in it.
It looks like a copy of Hobbykings tray.
Hobbyking tray
And if you look at both of them you realize that you could do them yourself !
@ JHSA sorry if i hijacked your thread .
To support the forum:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=82QKZZN5ZC8JE
To support ER9X:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=82QKZZN5ZC8JE
To support ER9X:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: A Custom Tray For The 9x
that one is a normal radio tray. The one on this thread is for thumb flyers.
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: A Custom Tray For The 9x
Sorry for the delay in taking the bait. Spent most of the day helping out/operating an event station ---> http://www.qrz.com/db/GB2MBA
I like the German tray. Almost tempted to buy it.
ABBC3_OFFTOPIC
Ermmm... Last time I looked I didn't see any tray that is designed for thumb flyers. Thumb flying is a throwback to the times when single channel button systems and toggle switches on the more advanced reed systems were the order of the day.
Re: A Custom Tray For The 9x
look in the first post.. you will see one..
Want to see another one? take a good look at the tray Steve Carr is using on the picture I already posted on the other thread
Want to see another one? take a good look at the tray Steve Carr is using on the picture I already posted on the other thread
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: A Custom Tray For The 9x
I will have to have long words with Steve.
Re: A Custom Tray For The 9x
Please say hello to him fromme. And also tell him that I do like his flying a lot and also like his radio tray.. he probably would like my Tx tray too.. It's fantastic for thumb flying
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
-
- Posts: 313
- Joined: Thu Dec 29, 2011 10:18 am
- Country: Australia
- Location: Cooloola Cove, Australia
Re: A Custom Tray For The 9x
Hi João, I have just found this old thread while looking for information on a Tx tray for myself. I tried the link on the first page of the thread and it does not work. Do you know if your friend can still make these as I would be interested in a flat pack version.
Dave
Dave
Re: A Custom Tray For The 9x
That is indeed quite old. I will contact him and ask.
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW