Taranis timer issue
-
- Posts: 3
- Joined: Fri May 16, 2014 3:17 pm
- Country: -
Taranis timer issue
I recently set up a new model on my Taranis with a countdown timer and minute reminder. I did a test flight and the time worked as I expected until it got to the 10 second mark at which point it started saying "10 seconds, 10 seconds, 10 seconds,10 seconds, 10 seconds.... all the way to 0:00. This doesn't seem like normal behavior to me. Have I missed something in the radio setup that is causing the abnormal countdown?
-
- Posts: 1844
- Joined: Tue Dec 27, 2011 8:22 pm
- Country: -
- Location: Ottawa
Re: Taranis timer issue
Perfectly normal behaviour. That's how it was set up with the original firmware. A later update gave a count down. Time to update your transmitter.
-
- Posts: 3
- Joined: Fri May 16, 2014 3:17 pm
- Country: -
Re: Taranis timer issue
I will double check but I'm pretty sure I have 2940 installed. Is there a newer firmware version available?
Re: Taranis timer issue
Not officially released yet, no.
Sent via mobile
Sent via mobile
- MikeB
- 9x Developer
- Posts: 18000
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Taranis timer issue
Have a look here: viewtopic.php?f=7&t=4582#p64580.
You will see one of the zip files includes r2940 openTx that I built including my bootloader. I also tweaked the countdown to behave better. Those are the only differences from the 'official' r2940.
Mike.
You will see one of the zip files includes r2940 openTx that I built including my bootloader. I also tweaked the countdown to behave better. Those are the only differences from the 'official' r2940.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!