Templates for boats
-
- Posts: 42
- Joined: Wed Mar 19, 2014 10:15 pm
- Country: United Kingdom
- Location: West Yorkshire
Templates for boats
Hi I am a total beginner at this so could do with some help please
I have both sail boats and power boats (tugs) I have just installed er9x onto the rx Turnigy 9x and all is working fine now I need help
does anyone know of templates for boats that would get me started I am using eepe via a smartie parts board.
Any help would be appreciated
cheers
Bill
I have both sail boats and power boats (tugs) I have just installed er9x onto the rx Turnigy 9x and all is working fine now I need help
does anyone know of templates for boats that would get me started I am using eepe via a smartie parts board.
Any help would be appreciated
cheers
Bill
Bill A born again modeler
Sent from my ipad using tapatalk
Sent from my ipad using tapatalk
- ShowMaster
- Posts: 4327
- Joined: Thu Dec 29, 2011 3:44 am
- Country: -
- Location: Los Angeles, CA USA
Re: Templates for boats
Many creative persons here that post mixes.
Maybe list the mixes you want and stick or switch actions, and persons will help with them.
Sent from my iPod touch using Tapatalk, small keys and a big finger.
Maybe list the mixes you want and stick or switch actions, and persons will help with them.
Sent from my iPod touch using Tapatalk, small keys and a big finger.
-
- Posts: 42
- Joined: Wed Mar 19, 2014 10:15 pm
- Country: United Kingdom
- Location: West Yorkshire
Re: Templates for boats
Thanks for the info Showmaster
Next question I saw a voice add on board (project fo later) what I need to know will it fit in the 9x with the Smartie parts boards fitted
It is a bit over kill for a boat (Avenger tug) which is now based on one of the great lakes, but I just like tinkering about
Next question I saw a voice add on board (project fo later) what I need to know will it fit in the 9x with the Smartie parts boards fitted
It is a bit over kill for a boat (Avenger tug) which is now based on one of the great lakes, but I just like tinkering about
Bill A born again modeler
Sent from my ipad using tapatalk
Sent from my ipad using tapatalk
- ShowMaster
- Posts: 4327
- Joined: Thu Dec 29, 2011 3:44 am
- Country: -
- Location: Los Angeles, CA USA
Re: Templates for boats
The Megasound board fits fine with a SP ver 2 board I installed some time ago. I did the cut and solder for the telemetry display mod so I didn't use the SP EZ add on. I'm not sure how much room the EZ takes up?
I'd contact Smartiparts and ask about room for the Megasound board. Great sounding audio btw. Let's see if anyone reading this has the answer.
SM
Sent from my iPod touch using Tapatalk, small keys and a big finger.
I'd contact Smartiparts and ask about room for the Megasound board. Great sounding audio btw. Let's see if anyone reading this has the answer.
SM
Sent from my iPod touch using Tapatalk, small keys and a big finger.
- ShowMaster
- Posts: 4327
- Joined: Thu Dec 29, 2011 3:44 am
- Country: -
- Location: Los Angeles, CA USA
Re: Templates for boats
Are you saying from your first post that you're using a SP board now for your er9x instal programmer? If so do you have the EZ telemetry display add on?
Do you have a picture of your install?
Here's how my SP ver 2 with a MSound board.
Sent from my iPod touch using Tapatalk, small keys and a big finger.
Do you have a picture of your install?
Here's how my SP ver 2 with a MSound board.
Sent from my iPod touch using Tapatalk, small keys and a big finger.
-
- Posts: 42
- Joined: Wed Mar 19, 2014 10:15 pm
- Country: United Kingdom
- Location: West Yorkshire
Re: Templates for boats
Hi yes i have fitted the sp v4 board and installed er9x all working fine and have the ez board ready to fit when the djt module arrives tomorrow I think.
I am planing on unsoldering the stock ant then resolder and fit the ant to the module so that I can still use it with my non tele recievers unless they will work with the djt mod wiout telementry
As a mater of interest check qrz m0wbh
Cheers
I am planing on unsoldering the stock ant then resolder and fit the ant to the module so that I can still use it with my non tele recievers unless they will work with the djt mod wiout telementry
As a mater of interest check qrz m0wbh
Cheers
Bill A born again modeler
Sent from my ipad using tapatalk
Sent from my ipad using tapatalk
-
- Posts: 42
- Joined: Wed Mar 19, 2014 10:15 pm
- Country: United Kingdom
- Location: West Yorkshire
Re: Templates for boats
New djt module arrived so will start fitting tomorrow after the club sail race that then gives me a week before the next race in case I hit any problems but going by s-mac,s good service and instruction I don't see any problems
I will post some pics as I go along and it looks like the sound board will be ok for another time.
Cheers and thanks to all for the interesting info on all the forums its even getting me back interested in flying again but if it does it will be heli,s
I will post some pics as I go along and it looks like the sound board will be ok for another time.
Cheers and thanks to all for the interesting info on all the forums its even getting me back interested in flying again but if it does it will be heli,s
Bill A born again modeler
Sent from my ipad using tapatalk
Sent from my ipad using tapatalk
- ShowMaster
- Posts: 4327
- Joined: Thu Dec 29, 2011 3:44 am
- Country: -
- Location: Los Angeles, CA USA
Re: Templates for boats
I have read where 2.4g has a little trouble over/on water. I haven't with a slow motored boat I run on a 360deg park fishing pond. Have your or your fellow captains had any issues?
I'm sure longer cats whisker antennas would help.
SM
Sent from my iPod touch using Tapatalk, small keys and a big finger.
I'm sure longer cats whisker antennas would help.
SM
Sent from my iPod touch using Tapatalk, small keys and a big finger.
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: Templates for boats
Think its more that the signal is not good close to the ground.
The further you go from you, the higher you have to go!
Sent from my GT-I9300 using Tapatalk
The further you go from you, the higher you have to go!
Sent from my GT-I9300 using Tapatalk
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
-
- Posts: 42
- Joined: Wed Mar 19, 2014 10:15 pm
- Country: United Kingdom
- Location: West Yorkshire
Re: Templates for boats
Yes I had trouble with the planet 5 radio as the reciever ant is very short plus down low below the waterline a lot of the time so would loose it about 50 yards but with the 9x ant I have blue tact them up uder the deck and did a test from one end of the lake about 200 yards with no problems only my eyesight couldnt see wether it was going away or comming towards me Hi.
Some other members want to change over to this system as I have gone from being last in every race to a 3, 4 and 6th today so I think s-mack will be getting some orders shortly
Cheers
Some other members want to change over to this system as I have gone from being last in every race to a 3, 4 and 6th today so I think s-mack will be getting some orders shortly
Cheers
Bill A born again modeler
Sent from my ipad using tapatalk
Sent from my ipad using tapatalk