I got my 9XR from HK last year and finally got round to trying to update the FW. I've downloaded and installed Companion9X and I am trying to figure out how to flash the 9XR with Open Tx. When I launch Companion9X then go to Preferences there is a drop down selection box called "Fimware". For the 9XR there are two options:
openTx for 9XR
openTx for 9XR with M128 chip
How do I find out if my 9XR has a M128 chip
9XR with or without M128 chip? How can I find out?
-
- 9x Developer
- Posts: 1109
- Joined: Sat Dec 31, 2011 12:11 am
- Country: -
- Location: Massa (MS), Tuscany, Italy
Re: 9XR with or without M128 chip? How can I find out?
Either open the radio or simply try to configure normal and try to read the eeprom,
If it can read is a M64, otherway if you get a signature error it's likely a M128
If it can read is a M64, otherway if you get a signature error it's likely a M128
Re: 9XR with or without M128 chip? How can I find out?
If you got it last year it's most likely an m64. HK started shipping them with m128s in April or so.
Sent via mobile
Sent via mobile
Re: 9XR with or without M128 chip? How can I find out?
M64 has 16 models and M128 has 30.
Re: 9XR with or without M128 chip? How can I find out?
Is that true with the stock firmware that ships on the 9XR ?tedbmoss wrote:M64 has 16 models and M128 has 30.
Did they start shipping with a different firmware ?
I hadnt thought they ever even listed the spec of the MCU, let alone updated it
I dont see an updated source
thanks
Re: 9XR with or without M128 chip? How can I find out?
No, AFAIK HK supply the M128 versions with the same firmware as the M64s, i.e. they don't make use of the extra memory.