People willing to help with modifications

Cant get your radio to work? General Hardware issues?
User avatar
erazz
9x Developer
Posts: 682
Joined: Tue Dec 27, 2011 6:25 pm
Country: -
Location: NJ-USA
Contact:

People willing to help with modifications

Post by erazz »

Hi Guys,

Modding these radios is simple for the initiated. For the newcomer it can be quite scary (it was for me!).
I think that it might be a good idea to have a resource/pool of people willing to help others. This is completely volentary and the only thanks you'll get is from the person you've helped.

I'd like to start a list here. Please specify your username (first name if you wish), your location (country/state is enough) and how you would prefer to be contacted. I would suggest that you do not include phone numbers as this is a public forum. From time to time I'll update the list from the responses below.


Here's the list:
Name: Erez
Location: NJ, USA (close to NYC)
Contact me by: PM

Name: Adrian
Location : GTA, Ontario, Canada
Conact: PM

Name: Grootwitbaas Aka Groot
Location: Germany, close to Stuttgart (my German is still bad)
Contact: Prefer Email but 1st contact PM. Phone support also possible.

Name: Shane (Kiwi_Heliguy AKA Westy)
Location: Waikato New Zealand
Contact: Preferred contact either phone or email.... PM me first and we can go from there.

Name: Randy Perkins (rperkins)
Location: Cleveland , Ohio - well Brunswick is about 30 miles south of Cleveland, but whose heard of Brunswick
Contact: contact info
Z

BEWARE - WE ARE IN THE AIR!!!
What goes up... Should be controlled by a 9X!

User avatar
cre8tiveleo
Posts: 1434
Joined: Tue Dec 27, 2011 6:13 pm
Country: -
Location: Ontario,(GTA North)
Contact:

People willing to help in modifications

Post by cre8tiveleo »

Name: Adrian
Location : GTA, Ontario, Canada
Conact: pm


Oooo... My location is on the sig :D




---
I am here: http://maps.google.com/maps?ll=44.056235,-79.476277
User avatar
wheelspinner20
Posts: 175
Joined: Tue Dec 27, 2011 6:22 pm
Country: -
Location: Michigan, U.S.

Re: People willing to help in modifications

Post by wheelspinner20 »

Sorry, not qualified. wait, I can show them how to get a plane stuck in tree!.... or, loose orientation pull out of an inverted dive by pulling up elevator.! I'm escellent at that.!


P.
no more quippy little latin phrases.! Its old
User avatar
GrootWitbaas
Posts: 358
Joined: Tue Dec 27, 2011 8:57 pm
Country: -
Location: Germany

People willing to help in modifications

Post by GrootWitbaas »

Grootwitbaas
Aka Groot
Germany, close to Stuttgart (my German is still bad)
Prefer Email but 1st contact PM. Phone support also possible.

Willing to do any and all mods, not just on tx but also example ESC custom firmware. Willing to attempt resurrection of dead TX after reverse polarity (but no guarantee this will succeed)



---
I am here: http://maps.google.com/maps?ll=48.930235,9.478233
Sent from my iPhone using Tapatalk
General trouble maker and wannabee Dev
User avatar
Rob Thomson
Site Admin
Posts: 4543
Joined: Tue Dec 27, 2011 11:34 am
Country: United Kingdom
Location: Albury, Guildford
Contact:

People willing to help with modifications

Post by Rob Thomson »

I am around for Uk help if people require it.


Sent from my iPhone using Tapatalk
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!

User avatar
wheelspinner20
Posts: 175
Joined: Tue Dec 27, 2011 6:22 pm
Country: -
Location: Michigan, U.S.

Re: People willing to help with modifications

Post by wheelspinner20 »

I was just kidding, I can help I think, there are many levels of distress, and I am usually ok at finding posts that others have put up that answer questions even when I can't.

Pat from Michigan, U.S.

pm for email.
no more quippy little latin phrases.! Its old
User avatar
Westy
Posts: 248
Joined: Tue Jan 31, 2012 8:44 pm
Country: -
Location: Te Awamutu, Waikato, New Zealand

Re: People willing to help with modifications

Post by Westy »

Username: Kiwi_Heliguy AKA Westy
Name: Shane

Location: Waikato New Zealand

I am happy to assist with all mods inc (but lot limited to) firmware upgrades, Backlight kit installation, bat mods and any other stuff.

Preffered contact either phone or email.... PM me first and we can go from there.

hope to hear from you kiwis soon :lol:
Cheers
Westy
User avatar
rperkins
Posts: 1422
Joined: Sun Jan 08, 2012 12:51 pm
Country: -

Re: People willing to help with modifications

Post by rperkins »

Willing to help.

rperkins
Randy Perkins
Cleveland , Ohio - well Brunswick is about 30 miles south of Cleveland, but whose heard of Brunswick

Can't fly my heli very well. dont know the ins and outs of the firmware(s) yet.
can solder, troubleshoot and help with linux software.
if it has cables and connectors and needs configured, I'm in :)
contact info
KayCee_V4
Posts: 7
Joined: Thu Jan 05, 2012 8:04 am
Country: -
Location: Sunny South Africa

Re: People willing to help with modifications

Post by KayCee_V4 »

Location: Vanderbijlpark, Gauteng, South Africa.
I can help with 9x mods, backlight, FrSky, USBASP.

Custom ambedded stuff (PIC & AVR) for RC: Nav/landing/strobe lights - slow retracts etc.
MultiWii and KK.

Contact via PM or email.

Cheers,
Kelvin.
Professional Tinkerer
pgregg88
Posts: 30
Joined: Tue Jan 03, 2012 4:59 am
Country: -
Location: Austin, TX
Contact:

Re: People willing to help with modifications

Post by pgregg88 »

I can help. PM and e-mail is best. I also have some updated training videos and a manual on the list or areas I want to help. I'm located in Austin, TX.

pgregg (at) parkeflyer.com

Edit by MOD to prevent spamming
___________________
[email protected]
User avatar
ShowMaster
Posts: 4327
Joined: Thu Dec 29, 2011 3:44 am
Country: -
Location: Los Angeles, CA USA

Re: People willing to help with modifications

Post by ShowMaster »

Has anyone thought of a mod service where only the board is sent out for mods?
If one had spares on hand a quick turnaround would work if the original board was not required returned. I damaged board repair as well?
The labor would be the limiting price if the required parts for installation were supplied with the board. The solder in programmer for instance. Critical telemetry updates to the board and the DJT module as well. This would require the original owner to make all the other case, module pins, and TTL to RS232 mods. Those mods are less critical soldering and such do damage would be much less for newbees.
Not for me due to busy club help already but it may work for simeone(s) here?
SM
User avatar
GrootWitbaas
Posts: 358
Joined: Tue Dec 27, 2011 8:57 pm
Country: -
Location: Germany

Re: People willing to help with modifications

Post by GrootWitbaas »

I am willing to do any mod in any easy way, and getting only the bare board can save on shipping, so a good idea, but I can not get spare boards for ready made mods, just because it seems customs in Germany blocks the TX now. If they did not I may have got 2 or 3 and striped them for "spares" just to help out where I can.

In General I think it is a good idea to just do the main board mods.
General trouble maker and wannabee Dev
User avatar
rperkins
Posts: 1422
Joined: Sun Jan 08, 2012 12:51 pm
Country: -

Re: People willing to help with modifications

Post by rperkins »

Hi.

I got an email from a guy looking for some help. He found me from here. He is "interested in purchasing a 9x with the hardware telemetry on screen hack and haptic feedback done". He talked about ordering his own parts. I asked him to open up a thread here about what he is looking for to get some feedback. Not sure if I am the best choice to help him but I said I would do what I can. His name is Dane.

Randy
pmackenzie
Posts: 236
Joined: Tue Dec 27, 2011 11:19 pm
Country: -
Location: Don Mills, Ontario

Re: People willing to help with modifications

Post by pmackenzie »

Add me to the list
Pat MacKenzie
Toronto (Don Mills)

contact by PM either here or on RCG
User avatar
Malcurin
Posts: 61
Joined: Fri Apr 20, 2012 7:58 pm
Country: -
Location: Matamata New Zealand
Contact:

Re: People willing to help with modifications

Post by Malcurin »

Massive thanks to Westy He helped me by sacrificing sleep before work to get the Mod on mine done for the firmware, its all flashed now and the Hot glue placed in we used Network cable for the wiring, its rather ridged though and pin one keeped coming loose whenever it was moved at all massive amounts of Hot glue fixed that Next thing is the back light Mod and the trainer Mod ( not sure if this still needs doing in the stock Module now with the software sending the signal to the trainer port now or not) and Looking at the speaker Mod too * though im poor now after making a few orders from Hobbyking* so it will be in the future, I do have an Old Nokia with a broken screen though, Might be able to use the speaker and haptic from that ......... might rip it aparrt and take a look*

thanks
Mike
Turnigy 9x with ER9X and back light FrSky DHT 8ch DIY, FLD-02 Telemetry Display Screen
AXN with 6x4 prop .... AWESOME!!!!!!!
Canterbury Sailplanes Jazz 60 and Eraser 60
Dyna-flight Butterfly ( under construction )
yovio
Posts: 21
Joined: Wed Dec 28, 2011 7:54 am
Country: -

Re: People willing to help with modifications

Post by yovio »

Am I the first in Asia?

Yovi
Singapore

contact by PM here or in daddyhobby using same nickname.
User avatar
gohsthb
Posts: 1412
Joined: Wed Dec 28, 2011 2:32 pm
Country: -
Location: Naperville, IL

Re: People willing to help with modifications

Post by gohsthb »

Gohst
Naperville, IL USA

Can help with mix programming, speaker mod, Frsky mod, and programmer installation. Can also change the m64 for a m128.
Last edited by gohsthb on Mon Mar 04, 2013 3:53 pm, edited 1 time in total.
User avatar
jaas75
Posts: 67
Joined: Tue Jan 24, 2012 6:56 pm
Country: -

Re: People willing to help with modifications

Post by jaas75 »

jaas
pittsburgh, pa
can help with programmer installation and dsm mod
User avatar
ShowMaster
Posts: 4327
Joined: Thu Dec 29, 2011 3:44 am
Country: -
Location: Los Angeles, CA USA

Re: People willing to help with modifications

Post by ShowMaster »

First off I think any fourm member that wants any help should fill in some location info in their profile. In my case I live in the Los Angeles area and have already helped several I contacted in my area(PM). I understand that we all want to have some privacy but in this case being too private may keep you from getting needed help.
I'de like to purpose that posting ones town, city or generalized vacinity is important for giving and getting help.
SM
User avatar
cre8tiveleo
Posts: 1434
Joined: Tue Dec 27, 2011 6:13 pm
Country: -
Location: Ontario,(GTA North)
Contact:

People willing to help with modifications

Post by cre8tiveleo »

So gps co ordinates onthe bottom of posts is over kill? :)


---
I am here: http://tapatalk.com/map.php?w1f2rh
User avatar
ShowMaster
Posts: 4327
Joined: Thu Dec 29, 2011 3:44 am
Country: -
Location: Los Angeles, CA USA

Re: People willing to help with modifications

Post by ShowMaster »

cre8tiveleo wrote:So gps co ordinates onthe bottom of posts is over kill? :)


---
I am here: http://tapatalk.com/map.php?w1f2rh
Maybe just your local walmart since they are everywhere?
Or Mc Donald's.
User avatar
cre8tiveleo
Posts: 1434
Joined: Tue Dec 27, 2011 6:13 pm
Country: -
Location: Ontario,(GTA North)
Contact:

People willing to help with modifications

Post by cre8tiveleo »

Tim hortons up here are more popular, there is one on every corner in every town... Almost. :D


---
I am here: http://tapatalk.com/map.php?t4ktc2
User avatar
Mechcondrid
Posts: 222
Joined: Fri Dec 30, 2011 3:53 am
Country: -
Location: ledyard, connecticut, United States
Contact:

Re: People willing to help with modifications

Post by Mechcondrid »

hey if anyone wants pre-modded frsky radios just go here! (shameless plug) http://mechs-rcmods.weebly.com
User avatar
ShowMaster
Posts: 4327
Joined: Thu Dec 29, 2011 3:44 am
Country: -
Location: Los Angeles, CA USA

Re: People willing to help with modifications

Post by ShowMaster »

A very good price. A few typos in the add and more detailed pictures of the modifications and Frsky telemetry showing on the screen would help a lot. I've been helping a few locals fully mod their 9x radios and your price in interesting. I was adding up the parts they ordered and the 9x cost $55-58 let's say + another $22 shipping from china. You must have a lower cost option fir irdering radios? The Sp board to their door using the new price is $43. The TTL to rs233 about $5. The DJT $22 and the RX $22-25 + $6 shipping from aloft.
If my fuzzy math is working I think they spent almost $150 on parts and shipping. How do you make any profit? I do it for free as a friend but if your product is good St that price I'll send the next "friends" to you.
Oh, what is the add on shipping snd handling your site mentions? No listing for that?
I'm asking because you did post a link to your product page so that opened up this discussion. You can pm me with your answeres if it's better to not talk prices here for profit.
You should attract a lot of persons here.
SM
User avatar
dvogonen
Posts: 453
Joined: Tue Jan 31, 2012 9:38 pm
Country: Sweden
Location: Stockholm

Re: People willing to help with modifications

Post by dvogonen »

I am located in Stockholm, Sweden. Since the interested would be Swedish the rest goes in the language of honor and heroes:

Jag har lött en hel del och kan hjälpa till med de två viktigase moddarna:
1) Inlödning av en programmerare
2) Att ta bort den den fasta antennen och fästa den på sändar-modulen, så det blir möjligt att byta till andra sändarmoduler.
Jag kan också visa hur man sedan laddar sändaren på enklaste och bästa sätt .

Övriga typer av modifikationer, tex montage av interna sändarmoduler, montage av bakgrundsbelysning, modifiering av höljet och montage av högtalare tror jag bäst utförs själv av den som är intresserad eftersom de medför en aningen högre risk.
User avatar
ShowMaster
Posts: 4327
Joined: Thu Dec 29, 2011 3:44 am
Country: -
Location: Los Angeles, CA USA

Re: People willing to help with modifications

Post by ShowMaster »

Sorry but google translater made such a mess of the translation of the language of heroes that I'm even more confused?
Maybe you could translate it better than I could because I'd like to read your comments.
Thank you.
I'm interested in this TX modification service since other flyers keep asking me to help them. I agree about the donation to the fourm of $5 euro for each tx firmware flash first time if done for profit. In fact first or second timers should do it now! I've made several donations in general but will make it standard now for anyone I do a firmware programming addition and flash for the first time.
I'm sure we're all doing that now but it doesn't hurt to mention how fortunate we are for the FW we use.
SM
User avatar
ShowMaster
Posts: 4327
Joined: Thu Dec 29, 2011 3:44 am
Country: -
Location: Los Angeles, CA USA

Re: People willing to help with modifications

Post by ShowMaster »

Still no pm or other shipping and handling info for the 9x updates?
SM
AlanGP
Posts: 27
Joined: Sun Feb 19, 2012 6:51 pm
Country: -
Location: Paderborn, Germany

Re: People willing to help with modifications

Post by AlanGP »

I am more than happy to help with 9x/FrSky mods. I am better at hardware than software and good with a soldering iron.

I have made all the mistakes on my own kit - so others should benefit from my lessons learned.

I live in the Paderborn area of Germany. I am English but speak sufficient German to deal with most issues.

Use alan(at)agpcom(dot)de

Cheers
Anything can be made to fly - wings are just an option
tigar
Posts: 162
Joined: Wed Dec 28, 2011 5:31 am
Country: -

Re: People willing to help with modifications

Post by tigar »

I can also help with 9x mods.
I am in Elefsina Athens Greece.
Pm me if you need help.
Craig
Posts: 12
Joined: Mon May 14, 2012 5:00 pm
Country: -

Re: People willing to help with modifications

Post by Craig »

I can help.

Name: Craig
Location : Phoenix, Az
Conact: pm

Post Reply

Return to “Hardware”