With 2.3.7 and 2.3.9 im not able to Trace Telemetry Data out over the internal Bt Mirror. HM-10 connected with 119200baud over AT Commands
In Model menue the Mac of my HM-10 is there.
Some thing came out of the HM-10. But not the Telemetry i expect.
If connect to Android App Telemetry Viewer. There is the right Data Till it disconnected after 30 seconds.
Can this be related to the Firmware on that HM-10?
It's V620
Does anyone know some thing about GATT Services and GATT Characters?
I THINK THE HM-10Connects to the wrong BTLE Service. And 0xFFF6 will be the right for Telemetry Data. But I dont know how to bind the HM-10 to that exact one.
Internal Bt not working after 2.3.3 Till 2.3.9
-
- Posts: 8
- Joined: Fri May 01, 2020 4:12 am
- Country: -
Re: Internal Bt not working after 2.3.3 Till 2.3.9
try:
AT+CHAR0xFFF6
in AT mod, this works with my HM-10
AT+CHAR0xFFF6
in AT mod, this works with my HM-10