Hi, I am trying to activate a timer when the right stick is moved in any direction as this is the motor controls for my boat, which is set as ele and ail
Any ideas? thanks John
Activate timer issue
-
- Posts: 97
- Joined: Fri Sep 08, 2017 6:53 pm
- Country: United Kingdom
- Location: Bordon, Hampshire, UK
- Contact:
Re: Activate timer issue
Logical switches:
L1 |v|>val Ele 10
L2 |v|>val Ail 10
L3 OR L1 L2
Timer menu
Timer 1 or Timer 2
Trigger A ON
Trigger B L3
Then select a reset switch. and select if it counts up or down. In case of counting down, select a start value..
That's it, when the stick is moved in any direction by more than 10, the timer will count and stop if the stick is at center.
enjoy
João
L1 |v|>val Ele 10
L2 |v|>val Ail 10
L3 OR L1 L2
Timer menu
Timer 1 or Timer 2
Trigger A ON
Trigger B L3
Then select a reset switch. and select if it counts up or down. In case of counting down, select a start value..
That's it, when the stick is moved in any direction by more than 10, the timer will count and stop if the stick is at center.
enjoy
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW