Invalid board version 2.2.2 Turnigh9x

openTx has introduced a range of new features, ideas and bling. It is fast becoming the firmware of choice for many users. openTx will run on ALL current hardware platforms, including the gruvin9x and sky9x boards. Work has already started to support the new FrSky X9D radio!
Post Reply
dfgeorge
Posts: 7
Joined: Fri Feb 23, 2018 1:58 am
Country: -

Invalid board version 2.2.2 Turnigh9x

Post by dfgeorge »

I am trying to download version 2.2.2 for "9X with stock board", no other options selected using OpenTX Companion 2.2.2. Looks like it starts to download then pops up an "Invalid Board" message.

Am I doing something wrong?

Thanks

jtaylor
Posts: 170
Joined: Fri Nov 01, 2013 1:31 am
Country: -
Location: Wexford (Pittsburgh), PA

Re: Invalid board version 2.2.2 Turnigh9x

Post by jtaylor »

User avatar
bob195558
Posts: 2377
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

Re: Invalid board version 2.2.2 Turnigh9x

Post by bob195558 »

Maybe try using: (http://www.er9x.com/)
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Invalid board version 2.2.2 Turnigh9x

Post by jhsa »

Er9x for the 9x radio is still being developed. OpenTX devs seem to have forgotten about this radio :)

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
dfgeorge
Posts: 7
Joined: Fri Feb 23, 2018 1:58 am
Country: -

Re: Invalid board version 2.2.2 Turnigh9x

Post by dfgeorge »

I've been running version 2.2.1 for a while without issue. I use Configurator to setup models. Maybe I should downgrade?

User avatar
bob195558
Posts: 2377
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

Re: Invalid board version 2.2.2 Turnigh9x

Post by bob195558 »

Eepe/eepskye (revision 422)
eepe and eepskye for Windows

Can use this (eepe) with er9x radio firmware to setup models: (http://www.er9x.com/).
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
dfgeorge
Posts: 7
Joined: Fri Feb 23, 2018 1:58 am
Country: -

Re: Invalid board version 2.2.2 Turnigh9x

Post by dfgeorge »

I guess the AVR radios should be removed from the radios page: http://www.open-tx.org/radios.

Ill give Er9x a go.
User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Invalid board version 2.2.2 Turnigh9x

Post by Kilrah »

If you look a tad mode closely it says "The following radios and radio boards are compatible with legacy versions 2.1.x of OpenTX."

Post Reply

Return to “openTx”