Receiver Firmware

General Information & Rules
Post Reply
Malc
Posts: 98
Joined: Thu Jan 23, 2014 12:32 pm
Country: -

Receiver Firmware

Post by Malc »

I have a number of V8FR-11 & V8R4-II frisky receivers which I have been using on my Taranis X9D Transmitter year of manufacture about 2012 using Mode D8.
I now a new Taranis X9D Plus EU-LBT Transmitter, is it possible to update the firmware of these receivers so that I can use receivers to use on my new Taranis X9D Plus EU-LBT Transmitter in Mode 16?
My old Taranis was NOT a Taranis Plus.

User avatar
Kilrah
Posts: 11107
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Receiver Firmware

Post by Kilrah »

No, they only support D8.
Malc
Posts: 98
Joined: Thu Jan 23, 2014 12:32 pm
Country: -

Re: Receiver Firmware

Post by Malc »

Thanks
jtaylor
Posts: 170
Joined: Fri Nov 01, 2013 1:31 am
Country: -
Location: Wexford (Pittsburgh), PA

Re: Receiver Firmware

Post by jtaylor »

If you just want to be able to use your old receivers on your new transmitter you can download and install openTX firmware without checking EU option and you should be able to bind them in D8 mode on the new transmitter. The other modes will still be EU-LBT, it just gives you D8 mode also.
Malc
Posts: 98
Joined: Thu Jan 23, 2014 12:32 pm
Country: -

Re: Receiver Firmware

Post by Malc »

I believe this is not possible with the Taranis Plus EU-LBT Transmitter .
When to select Taranis Plus in the settings you do not get the option of the D8 mode.

Malc
Posts: 98
Joined: Thu Jan 23, 2014 12:32 pm
Country: -

Re: Receiver Firmware

Post by Malc »

Yes you can do that in Open TX Companion .
But when to turn on the Taranis you can NOT select D8 mode!
User avatar
Kilrah
Posts: 11107
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Receiver Firmware

Post by Kilrah »

It is, and he told you exactly how.
Malc
Posts: 98
Joined: Thu Jan 23, 2014 12:32 pm
Country: -

Re: Receiver Firmware

Post by Malc »

Thanks a lot .Topic closed.

Post Reply

Return to “General Information & Rules”