Feature request: Flight modes in mixer screen.

eepSKYe is the desktop too for flashing and managing your sky9x firmware.
Post Reply
User avatar
mentero
Posts: 92
Joined: Sat Apr 23, 2016 1:11 pm
Country: Spain

Feature request: Flight modes in mixer screen.

Post by mentero »

Hi,

I think it will be useful to see fligh modes on the mixer screen, to show in each line what modes are affected.

That will make modes easier to program and understand.

If possible.

Best,
Miguel
We demand rigidly defined areas of doubt and uncertainty. Douglas Adams.

User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Feature request: Flight modes in mixer screen.

Post by MikeB »

That should be possible, so something like:
CH5: +100% P2 FM(0123456)

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
User avatar
mentero
Posts: 92
Joined: Sat Apr 23, 2016 1:11 pm
Country: Spain

Re: Feature request: Flight modes in mixer screen.

Post by mentero »

Hi Mike,

Yes, and maybe only for lines that have modes (and not all) selected.

In this way, simple models stay simple and easy to understand and complex models have a valuable info.
Understanding that asking is way easier than writing code, mode names will be even better.

CH5: +100% P2
+5%Rud FM(LAUNCH, SPEED)
+9%Rud FM(LANDING)

Thanks
Miguel
We demand rigidly defined areas of doubt and uncertainty. Douglas Adams.
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Feature request: Flight modes in mixer screen.

Post by MikeB »

I'll see about the names, I have the numbers displaying, and, as you suggest, I don't display "FM()" if all modes are active.

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
User avatar
mentero
Posts: 92
Joined: Sat Apr 23, 2016 1:11 pm
Country: Spain

Re: Feature request: Flight modes in mixer screen.

Post by mentero »

Hi Mike,

It is only today that I realize that eepsky is being updated on the test version thread, :? so, better late than never, thank You so much for the mod, works a treat and helps a lot in understanding mixes on "complex" models.

Keep up the good work,
Miguel
We demand rigidly defined areas of doubt and uncertainty. Douglas Adams.

johnrcglider
Posts: 97
Joined: Fri Sep 08, 2017 6:53 pm
Country: United Kingdom
Location: Bordon, Hampshire, UK
Contact:

Re: Feature request: Flight modes in mixer screen.

Post by johnrcglider »

This would be handy feature, especially for a newbie like me
User avatar
mentero
Posts: 92
Joined: Sat Apr 23, 2016 1:11 pm
Country: Spain

Re: Feature request: Flight modes in mixer screen.

Post by mentero »

Hi,

Courtesy of MikeB, this feature is already implemented and working.

Dowload the latest release of eepskye from here:

http://web.openrcforums.com/forum/viewt ... de8c86df7d

Untitled.png
We demand rigidly defined areas of doubt and uncertainty. Douglas Adams.

Post Reply

Return to “eepSKYe”