MikeB came up with (or at least posted) this a while back, and per Rob's request here is a simple template.
The mix lets the source control the speed of servo movement, rather than its absolute position.
When the stick (pot, or whatever) is at center, the servo holds its present position, whatever that may be. When the stick is moved off center, the servo begins moving progressively in that direction. How quickly it moves is proportional to the stick position.
Notes on function and usage are on the mixes.
Servo speed/scroll/integral mix
Servo speed/scroll/integral mix
- Attachments
-
- CamControl.eepe
- (2.22 KiB) Downloaded 580 times
-
- Posts: 46
- Joined: Mon Jan 09, 2012 9:54 am
- Country: -
Re: Servo speed/scroll/integral mix
Hey, that is exactly what i am trying to do! Perfect.
I opened your Template in companion9x for openTX but it does not seems to work.
Whixch stick shall control the output on ch01?
Maybe there is something goiing wrong when importing the template...
I opened your Template in companion9x for openTX but it does not seems to work.
Whixch stick shall control the output on ch01?
Maybe there is something goiing wrong when importing the template...
Re: Servo speed/scroll/integral mix
Hy Frickler,
here the Camcontrol for Taranis adapted and tested.
for 1 and for 2 Chanels X/Y
Speedsetting is with curve 9 and/or with weight from 3% to 2% or 1 %
Helle
here the Camcontrol for Taranis adapted and tested.
for 1 and for 2 Chanels X/Y
Speedsetting is with curve 9 and/or with weight from 3% to 2% or 1 %
Helle
- Attachments
-
- CamControl_2 Kanal.eepe
- Cam Control Dynamische Servobewegung für Taranis 2 Kanal
- (76.03 KiB) Downloaded 549 times
-
- CamControl.eepe
- Cam Control Dynamische Servobewegung für Taranis
- (76.03 KiB) Downloaded 535 times
Re: Servo speed/scroll/integral mix
Holy thread resurection, Batman !
But...
I had to register to thank you, with thes mixes/logical switches i can now make my 3d printed excavator behave like the real thing instead of having the servos return to center when i release the sticks.
I searched so much for a way to do this and having found this page, resolved all my problems !!
THANK YOU SO MUCH !!
But...
I had to register to thank you, with thes mixes/logical switches i can now make my 3d printed excavator behave like the real thing instead of having the servos return to center when i release the sticks.
I searched so much for a way to do this and having found this page, resolved all my problems !!
THANK YOU SO MUCH !!