tranis x9d NOTplus

Hardware help and support for the FrSky Taranis
Post Reply
lanerover
Posts: 29
Joined: Mon Jul 22, 2013 4:35 am
Country: -

tranis x9d NOTplus

Post by lanerover »

OK guys a little help please. i recently moved my x8r receiver together with lipo sensor and high precesion vario to another model and now nothing works, im pretty sure everything was working beforehand. the only thing i can presume is that updating the radio to open tx 2.017 has something to do with it. from my searches on the internet i know the plus is affected but i can find no references to the original x9d. can anyone point me to where i might find the required information? Thanks Kevin

lanerover
Posts: 29
Joined: Mon Jul 22, 2013 4:35 am
Country: -

Re: tranis x9d NOTplus

Post by lanerover »

Guess there's no answer to this one, looks like I'll be reflashing back to pre 2.00 version has anyone encountered problems doing this? Thanks Kevin.
User avatar
kalle123
Posts: 905
Joined: Sat Mar 29, 2014 10:59 am
Country: -
Location: Moenchengladbach

Re: tranis x9d NOTplus

Post by kalle123 »

lanerover wrote: Wed Apr 19, 2017 7:05 am Guess there's no answer to this one, looks like I'll be reflashing back to pre 2.00 version ...
A bit obsolete. ;)

Why not put the actual version (2.1.9) on your tx and try this?

http://www.open-tx.org/downloads.html

br
User avatar
bob195558
Posts: 2377
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

Re: tranis x9d NOTplus

Post by bob195558 »

Did you try re-bind to your receiver ?
May be have lost bind.

Bob B.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: tranis x9d NOTplus

Post by Kilrah »

"Nothing works" means nothing. More detail needed.
lanerover wrote: Mon Apr 17, 2017 1:23 pm the only thing i can presume is that updating the radio to open tx 2.017 has something to do with it.
No reason it would.
lanerover wrote: Wed Apr 19, 2017 7:05 am Guess there's no answer to this one, looks like I'll be reflashing back to pre 2.00 version has anyone encountered problems doing this? Thanks Kevin.
You would lose any settings you have not backed up prior to the 2.0 upgrade.

lanerover
Posts: 29
Joined: Mon Jul 22, 2013 4:35 am
Country: -

Re: tranis x9d NOTplus

Post by lanerover »

Sorry guys been ill for last few days,
kalle is 2.19 likely to make that much difference from 2.017?
Bob mysteriously ​it lost bind on one occasion but instantly rebound.
Kilrah, sorry a better explanation, after moving all the components the receiver still controls all the servos but the lipo sensor only shows battery voltage off the balance plug the red led refuses​ to light up even with a brand new sensor whilst the telemetry screen on the Transmitter shows 5v! Don't know where thats coming from batteries are fully charged both 3s and 4s.similarly the variometer shows nothing and produces no sounds, again the led refuses to light even when plugged in directly not daisy chained.
User avatar
kalle123
Posts: 905
Joined: Sat Mar 29, 2014 10:59 am
Country: -
Location: Moenchengladbach

Re: tranis x9d NOTplus

Post by kalle123 »

lanerover wrote: Fri Apr 21, 2017 9:20 am kalle is 2.19 likely to make that much difference from 2.017?
Think, it is worth to give it a try ;)
User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: tranis x9d NOTplus

Post by Kilrah »

Looks like you've got a broken or disconnected cable int he telemtry sensor chain.

2.1 has significant changes to how telemetry is handled and configured. If you're already a bit lost now I wouldn't upgrade.
lanerover
Posts: 29
Joined: Mon Jul 22, 2013 4:35 am
Country: -

Re: tranis x9d NOTplus

Post by lanerover »

Thanks guys I have a friend who is a whizz with RC electronics. Over to him.

Post Reply

Return to “FrSky Taranis radio”