Roll trim &SF switch behave strangely

Help with any software/desktop related issues. e.g. companion9x, eePe, etc
Post Reply
mfbs
Posts: 7
Joined: Tue Dec 15, 2015 9:39 pm
Country: -

Roll trim &SF switch behave strangely

Post by mfbs »

Hi
After updating to ver..2.2 when I turn On Taranis I get massage SF switch warning eventhough the switch is in up position.My second issue is at start up the Roll trim slid to max.I hope I am not in the wrong forum regarding my issue.here is a short video of minor problem.Thanks in advance. :D
https://youtu.be/TC6rTCldG8Y

User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Roll trim &SF switch behave strangely

Post by Kilrah »

What version of 2.2?
mfbs
Posts: 7
Joined: Tue Dec 15, 2015 9:39 pm
Country: -

Re: Roll trim &SF switch behave strangely

Post by mfbs »

2.2.N366

Sendt fra min YOGA Tablet 2-1050F med Tapatalk

mfbs
Posts: 7
Joined: Tue Dec 15, 2015 9:39 pm
Country: -

Re: Roll trim &SF switch behave strangely

Post by mfbs »

What I have noticed also that in radio menu in switch test menu the +trim on roll is 1 and I can't trim it back and set it to Zero,I think that caused the trim to go max.

Sendt fra min YOGA Tablet 2-1050F med Tapatalk


User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Roll trim &SF switch behave strangely

Post by Kilrah »

Then your trim key is stuck pressed.

mfbs
Posts: 7
Joined: Tue Dec 15, 2015 9:39 pm
Country: -

Re: Roll trim &SF switch behave strangely

Post by mfbs »

It is not stuck cause I can go to Min than I can't set back to mid.What mean is I can go from max to mid and min but I can't go to mid and max.

Sendt fra min YOGA Tablet 2-1050F med Tapatalk



User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Roll trim &SF switch behave strangely

Post by Kilrah »

As said, your key is stuck. It won't do anything until it's released and repressed, but as it's stuck that never happens.
Daedalus66
Posts: 1844
Joined: Tue Dec 27, 2011 8:22 pm
Country: -
Location: Ottawa

Roll trim &SF switch behave strangely

Post by Daedalus66 »

Understand that the trim key has two switches, one for each direction. One of the two switches is stuck.
mfbs
Posts: 7
Joined: Tue Dec 15, 2015 9:39 pm
Country: -

Re: Roll trim &SF switch behave strangely

Post by mfbs »

Any solution?

Sendt fra min YOGA Tablet 2-1050F med Tapatalk

User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Roll trim &SF switch behave strangely

Post by Kilrah »

Yes, check those switches and replace them if necessary... The little board with the 2 trim buttons is a $2.50 replacement part.
mfbs
Posts: 7
Joined: Tue Dec 15, 2015 9:39 pm
Country: -

Re: Roll trim &SF switch behave strangely

Post by mfbs »

Today I have update it to N369 and trim is working on both ways and switch SC is stuck regardless of its position.It is software problem and not hardware.

Sendt fra min YOGA Tablet 2-1050F med Tapatalk

User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Roll trim &SF switch behave strangely

Post by Kilrah »

If it was other people would have the same issue - but they don't.

Check your switch settings on the Hardware settings page.
mfbs
Posts: 7
Joined: Tue Dec 15, 2015 9:39 pm
Country: -

Re: Roll trim &SF switch behave strangely

Post by mfbs »

I have checked the switch setting and nothing wrong with that.The only suspicious thing that I have in mind is C&T Sensor when I update the firmware 2.2.rc369 lua ,that might have some sort of bug in there modified software that cause that.

Sendt fra min YOGA Tablet 2-1050F med Tapatalk



Post Reply

Return to “Software”