Maximum speed, altitude and range value on Taranis screen

Post Reply
Mnero
Posts: 3
Joined: Sun Dec 25, 2016 2:56 pm
Country: Slovenia

Maximum speed, altitude and range value on Taranis screen

Post by Mnero »

Hi

I would like to have the maximum speed, altitude and range reached on my Taranis telemetery screen.
Anybody succesfully done that? I cant figure it out.... :roll:
Thank you in advance

rdeanchurch
Posts: 750
Joined: Tue Dec 27, 2011 11:22 pm
Country: United States
Location: Carson City, Nv

Re: Maximum speed, altitude and range value on Taranis screen

Post by rdeanchurch »

Information required to answer this includes:
What version of firmware is on your Taranis.
What sensors are you using.

The range will be the only thing that is difficult if you have a GPS. Probably impossible without.
A vario and speed sensor could give you altitude and speed..
Dean
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1
Mnero
Posts: 3
Joined: Sun Dec 25, 2016 2:56 pm
Country: Slovenia

Re: Maximum speed, altitude and range value on Taranis screen

Post by Mnero »

version 2.0.18
I am using FrSky GPS v2. It gives me the time, GPS(coordinates), Gspd(speed) and Galt(altitude) values. And with those I can also create virtual sensors for distance and range.
Now I would like to have maximum reached speed, altitude and range on my Taranis screen but I dont know how to do it. I thought it was with max function - when creating virtual sensor, but it does not work.
User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Maximum speed, altitude and range value on Taranis screen

Post by Kilrah »

You say 2.0.18, but you also talk of "virtual sensors", not sure what you're talking about since there is no such notion in 2.0.

On 2.0 in the telemetry screen configuration when choosing an item to display at the end of the list you'll find things like "Dst+", which is max distance.
Mnero
Posts: 3
Joined: Sun Dec 25, 2016 2:56 pm
Country: Slovenia

Re: Maximum speed, altitude and range value on Taranis screen

Post by Mnero »

Sorry, 2.0.18 was the bootloader.

OpenTX is the last 2.1.9!

User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Maximum speed, altitude and range value on Taranis screen

Post by Kilrah »

Not much different then, the order has just changed and instead of the +/- being at the end they're chained with each sensor e.g. RSSI, RSSI-, RSSI+.

Post Reply

Return to “openTx for FrSky radios”