Trims in openTx V2.1.9
-
- Posts: 284
- Joined: Sat Apr 16, 2016 11:33 pm
- Country: -
Trims in openTx V2.1.9
Hi,
I have a question about trims moving when flight mode changes.
I have two flight modes. My elevator and rudder were trimmed (so trim are not centered) with mixer at 70 for flight mode 1.
When I switch to flight mode 2, they both move slightly which I believe is normal since flight mode 2 has mixer at 100.
What is the best way to keep the same elevator and rudder positions when I switch flight modes?
In the flight modes menu I see the trims for each surface, R,E,T,A but I don't know how to adjust them.
I see 0,0+,1,1+,2,2+,3,3+ up to 8, 8+. How does that work?
How can I adjust the trims so they don't move when flight mode changes?
Thanks
Ray
I have a question about trims moving when flight mode changes.
I have two flight modes. My elevator and rudder were trimmed (so trim are not centered) with mixer at 70 for flight mode 1.
When I switch to flight mode 2, they both move slightly which I believe is normal since flight mode 2 has mixer at 100.
What is the best way to keep the same elevator and rudder positions when I switch flight modes?
In the flight modes menu I see the trims for each surface, R,E,T,A but I don't know how to adjust them.
I see 0,0+,1,1+,2,2+,3,3+ up to 8, 8+. How does that work?
How can I adjust the trims so they don't move when flight mode changes?
Thanks
Ray
Re: Trims in openTx V2.1.9
Hy,
the source for trim value at a flight mode can be selected
A) each flight mode has its own trim value
or
B) trim values comes from an other flight mode
think A) will be best
the source for trim value at a flight mode can be selected
A) each flight mode has its own trim value
or
B) trim values comes from an other flight mode
think A) will be best
Re: Trims in openTx V2.1.9
C) trim value is that of another mode, plus own offset
-
- Posts: 284
- Joined: Sat Apr 16, 2016 11:33 pm
- Country: -
Re: Trims in openTx V2.1.9
Thanks for the answers.
My question was mainly on trim numbers in the flight modes menu.
What are these? 0, 0+, 1, 1+, 2, 2+,,,,, 8, 8+
Thanks
Ray
My question was mainly on trim numbers in the flight modes menu.
What are these? 0, 0+, 1, 1+, 2, 2+,,,,, 8, 8+
Thanks
Ray
-
- Posts: 284
- Joined: Sat Apr 16, 2016 11:33 pm
- Country: -
Re: Trims in openTx V2.1.9
Hi,
OK I think I got the 0,0+ 1,1+....8,8+, these are the flight modes selections and + for offsets.
But what I don't understand is why do I need to trim R,E,T,A for every flight mode?
Lets say the elevator was trimmer in flight mode 0 and the trim value is 17.5, then this value should not change for all the flight mode? It should be always 17.5 regardless of the flight mode? Right? how can I ensure the 17.5 trim value will remain the same for all flight modes?
This trim value changes each time flight mode changes.
Please advise.
Ray
OK I think I got the 0,0+ 1,1+....8,8+, these are the flight modes selections and + for offsets.
But what I don't understand is why do I need to trim R,E,T,A for every flight mode?
Lets say the elevator was trimmer in flight mode 0 and the trim value is 17.5, then this value should not change for all the flight mode? It should be always 17.5 regardless of the flight mode? Right? how can I ensure the 17.5 trim value will remain the same for all flight modes?
This trim value changes each time flight mode changes.
Please advise.
Ray
-
- Posts: 284
- Joined: Sat Apr 16, 2016 11:33 pm
- Country: -
Re: Trims in openTx V2.1.9
Hi,
OK I got this trim settings.
Each flight mode can force another flight mode settings, set it's own, or with offset.
Sorry I did not understand your answers, they were clear. More coffee for me....
Ray
OK I got this trim settings.
Each flight mode can force another flight mode settings, set it's own, or with offset.
Sorry I did not understand your answers, they were clear. More coffee for me....
Ray
-
- Posts: 284
- Joined: Sat Apr 16, 2016 11:33 pm
- Country: -
Re: Trims in openTx V2.1.9
Hi,
Trims again, sorry.
It seems that when flight mode 0 is selected in other flight modes for trims, it does not always work.
When flight modes 1,2,3... are used in other flight modes, then it works, but for some reason flight mode 0 trims used in other flight modes do not work.
I tried everything and all situations work except when flight mode 0 is used for other flight modes trims.
Ray
Trims again, sorry.
It seems that when flight mode 0 is selected in other flight modes for trims, it does not always work.
When flight modes 1,2,3... are used in other flight modes, then it works, but for some reason flight mode 0 trims used in other flight modes do not work.
I tried everything and all situations work except when flight mode 0 is used for other flight modes trims.
Ray
-
- Posts: 1
- Joined: Thu Dec 15, 2016 11:31 pm
- Country: -
Re: Trims in openTx V2.1.9
Hallo Herr Renz.
Ich würde sie gerne direkt kontaktieren.
Ob Sie mich unter [email protected] einmal anschreiben könnten?
Danke!
Ich würde sie gerne direkt kontaktieren.
Ob Sie mich unter [email protected] einmal anschreiben könnten?
Danke!
Re: Trims in openTx V2.1.9
You should not post your email in clear on a forum, and rather contact him using the private message system.
Re: Trims in openTx V2.1.9
The problem is, he cannot use PM's yet, I suppose??
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Trims in openTx V2.1.9
Yep he can, accounts have been validated after one approved post for quite a while.
Re: Trims in openTx V2.1.9
Oh, shame on me.. didn't know that..
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW