RESOLVED: Formatting EEPROM after flashing model changes to radio

How to use eePe
Post Reply
Jerrit1
Posts: 17
Joined: Mon Oct 31, 2016 12:54 am
Country: -

RESOLVED: Formatting EEPROM after flashing model changes to radio

Post by Jerrit1 » Mon Oct 31, 2016 1:01 am

I get an error after making chages to my models and then flashing the EEPROM back onto the transmitter.
It always says there was an error and that it is Formatting EEPROM.

I have a Turnigy 9XR (bought in 2014) with the m128 chip.
I flashed the ER9X r820 firmware onto it
Im using EEPE 419

I can get the firmware off the transmitter just fine but once I modify any of the settings and try to flash it back onto the transmitter it gives me this error and wipes all my models.
I have tried using the "set fuses to protect EEPROM" feature, this did not solve the issue.
Any thoughts?
Last edited by Jerrit1 on Sat Dec 10, 2016 4:21 am, edited 1 time in total.

User avatar
MikeB
9x Developer
Posts: 13553
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset

Re: Formatting EEPROM after flashing model changes to radio

Post by MikeB » Mon Oct 31, 2016 9:10 am

Did you flash "er9x-128.hex"?
What revision of eepe are you using?

Mike.
ersky9x/er9x developer

Jerrit1
Posts: 17
Joined: Mon Oct 31, 2016 12:54 am
Country: -

Re: Formatting EEPROM after flashing model changes to radio

Post by Jerrit1 » Tue Nov 01, 2016 5:15 am

Hmm...looks like I used "ER9X standard"

Jerrit1
Posts: 17
Joined: Mon Oct 31, 2016 12:54 am
Country: -

Re: Formatting EEPROM after flashing model changes to radio

Post by Jerrit1 » Tue Nov 01, 2016 5:25 am

I just flashed "ER9X for Mega128 processor"...I will do some testing and get back to you...thanks for your quick response.

Jerrit1
Posts: 17
Joined: Mon Oct 31, 2016 12:54 am
Country: -

Re: Formatting EEPROM after flashing model changes to radio

Post by Jerrit1 » Sat Dec 10, 2016 4:20 am

SOLUTION: The file I was using was for the 9x, I re-flashed the firmware using the "ersky9x for 9XR-PRO" file and its all working fine now.

Post Reply

Return to “eePe”

Who is online

Users browsing this forum: sdavies and 1 guest